顯微探針 的英文怎麼說

中文拼音 [xiǎnwéitànzhēn]
顯微探針 英文
microprobe
  • 顯 : Ⅰ形容詞1 （明顯） apparent; obvious; noticeable; evident 2 （有名聲有權勢的） illustrious and inf...
  • 探 : Ⅰ動詞1 （試圖發現） try to find out; explore; sound 2 （看望） call on; visit; see 3 （向前伸出）...
  • 針 : Ⅰ名詞1 （縫衣物用的工具） needle 2 （細長像針的東西） needle like things 3 （針劑） injection; sh...
  • 顯微 : microadiography
  • 探針 : probe; sound; filling fork; feeler; explorer; probing pin; touch needle; wire probe
  1. Discussion of multimode scanning probe microscope based on afm

    基於原子力顯微的多模式掃描探針顯微鏡
  2. Authigenic minerals and their occurrence in the meso - cainozoic reservoir sandstones were observed and analyzed by optical microscope, sem, epma and xrd

    採用光學顯微鏡、掃描電鏡、電子探針及x射線衍射觀察分析了塔里木盆地中新生界儲層砂巖自生礦物及其在巖石中的產狀。
  3. The laser microprobe dating drives k - ar geochronology into a new milestone at the end of 20th century

    20世紀末激光顯微探針定年把k - ar年代學推向了新的里程碑
  4. The applications of scanning probe microscopy a review

    掃描探針顯微術的應用綜述
  5. Scanning probe microscopy based nanotechnology

    基於掃描探針顯微鏡的納米技術
  6. Improved atomic force microscope imaging in liquid with active probe

    壓電探針應用於原子力顯微鏡液體成像的研究
  7. A novel modularized near - field scanning optical microscopy was developed, with its modules such as tuning - fork optical fiber probe, scanning head and scanning platform etc, of high performance and easy operation

    摘要採用模塊化的設計思想，製成了高質量且簡單易用的音叉光纖探針模塊、模塊化的掃描探頭、掃描臺等，從而研製出高性能，易操作的模塊化的保偏近場掃描光學顯微鏡。
  8. The components, microstructure, luminousness, thickness and surface topography of the films were analysised via xrd, uv ? vis, xps, ellipsometric examination and stm. the photocatalytic properties of these fims are characterized by the decomposition rate of methylene blue or rhodamine b. the effect of sputtering power, temperature, o2 mass flow, bias, w - doping and sputtering time on photocatalytic properties are discussed

    採用x射線衍射儀、紫外-可見光分光光度計、 x光電子能譜儀、薄膜厚度測試儀及掃描探針顯微鏡等測試手段，研究分析了薄膜的組分、結構、透光率、膜厚和表面形貌等。
  9. 3. using scanning tunnel microscopy ( stm ) to observe microcosmic change between biomolecule and gold particle on the surface of lsaw biosensor during the process of probe immobilization and hybridization, also the naked gold membrane

    3 .利用掃描隧道顯微鏡觀察傳感器裸金膜表面、探針固定、核酸雜交過程中生物分子與金顆粒之間的微觀變化。
  10. Secondly, introducing the image analyzing technology with reference to the disadvantages of the traditional ferr - graph analysis technology, and with the combination of characteristic parameter optimizing filtration so as to raise a description method of debris micro - morphologic character. thirdly, with the application of mode recognition method, completing the process of debris auto - recognition based on the collected information of the debris configuration characteristics ; and conducting the diagnosis on the aero - engine wear faults according to the theory of particle tribology. fourthly, introducing information fusion technology to solve the problem that a single method can not collect enough fault premonitory information to conduct the wear fault diagnosis, hence to conduct the research and exploration in the field of comprehensive diagnosis on the aero - engine ' s multi - fault premonitory information

    本文的研究工作主要包括以下五個部分：首先，介紹航空發動機常見的磨損故障類型，研究磨損故障的失效機理，分析磨粒的產生機理、分類以及形態特徵：其次，針對傳統鐵譜分析技術的缺點，引入圖像分析技術，再結合特徵參數優化篩選，形成基於圖像的磨粒顯微形態學特徵描述方法：然後，基於提取到的磨粒形態特徵信息，應用模式識別方法完成磨粒自動識別，並根據顆粒摩擦學的基本原理進行航空發動機磨損故障的診斷與定位：再后，鑒于單一方法不能提取足夠的故障徵兆信息進行磨損故障診斷，本文引入信息融合技術，開展航空發動機多故障徵兆信息綜合診斷方法的研究與探索；最後，基於航空發動機滑油光譜分析與鐵譜分析數據，應用時序模型、灰色模型以及組合模型進行磨損故障的預測方法研究。
  11. A mixture of three amino acids ( arg, gly, glu ) labeled with fluorescein isothiocyanate ( fitc ) was separated in pdms microfluidic chip, the separation voltage is 200v / cm, the separation time is less than 120 seconds ; according to ccd fluorescence images, two distinct physical processes - stacking and destacking during sample injection were studied qualitatively ; rhodamine b, a kind of temperature - dependent fluorescence dye, was used as probe to develop a temperature - fluorescence intensity equation, then temperature - color map in microchannels was constructed, and temperature trait in microchannels on the pdms microfluidic chip was analysed. according to the results, we conclude that the electric field applied to the pdms microfluidic chip should not exceed 400v / cm

    利用pdms微流控晶元對fitc標記的精氨酸、甘氨酸、谷氨酸混合物進行了電泳分離，分離電壓為200v cm ，分離時間不到120秒；通過拍到的熒光顯微圖像對電泳注樣過程中復雜的樣品分子積聚與解聚現象作定性的分析；以熒光染料rhodamineb為溫度熒光探針，建立了pdms微流控晶元上的溫度-熒光強度的關系公式，並利用matlab圖像處理工具箱構建出微流體溝道內的溫度色圖，對pdms微流控晶元的微流道溫度特性進行了分析，根據實驗結果，我們認為對于pdms微流控晶元來說，在進行需要外加電場作用的試驗時，外加電場不應超過400v cm 。
  12. With the development of science and technology, the need of micro system is more and more urgent in many technical fields, such as various operation of cell and polymerized substances, micro surgery, scanning probe microscope ( spm ), butting optical fiber, fine manufacturing etc. with the development of micro - technology, micro mechanism, which has the character of micro size or micro motion is new high technology from microcosmic point of view understanding and reconstructing the world, micro mechanism technology is important means for researching nanotechnology, so the micro stereo vision ( msv ) techniques are demanded urgently in microcosmic domain

    隨著科學技術的發展，許多領域越來越迫切地需要微型系統或微動系統，如生物細胞、聚合物的各種操作、微外科手術、掃描探針顯微鏡spm 、光纖對接和微細加工等；而且隨著微技術的不斷發展，以形狀尺寸微小、操作尺度極小為特徵的微機械已成為人們從微觀角度認識和改造客觀世界的一種高新技術；微機械技術還有望成為研究納米技術的重要手段，因此在微觀領域迫切要求顯微立體視覺技術的發展。
  13. The imaging realization of non - probe near - field optical microscope

    非探針近場光學顯微鏡的成像實現
  14. The paper lays a strong emphasis on discussing the realization of the autocontrol of raster scanning of the scanner in x - y dimension, the " tapping " of the cantilever of the tappingmode afm by a direct digital synthesizer. then a method of parallel communication between dsp and pc in epp mode is given. finally, the author discussed the digital pid closed loop control of the scanner in z - direction, the automatic approaching of the tip using step - motor, and also some electro - magnetic interferences

    論文首先簡單介紹了掃描探針顯微鏡的發展、分類、工作原理及應用；接著對ti公司的tms320vc5402dsp的特點及外圍擴展作了簡單介紹；然後分章節重點講述了利用vc5402dsp實現掃描探針顯微鏡的核心部件? ?壓電陶瓷管的x向和y向的光柵掃描控制；藉助直接數字集成器（ dds ）實現輕敲式原子力顯微鏡的微懸臂的「輕敲」 ； vc5402dsp的主機介面（ hpi ）與pc機在增強并行口（ epp ）模式下的通信；論文最後還介紹了掃描管z向的數字pid閉環控制，步進電機的自動進針，並對實際出現的一些電磁干擾問題作了討論。
  15. First, glass slides having been rinsed will be treated with nh3h2o, aminosilane and aldehyde. second, the quality of pretreatment surface of glass slides can be tested through methods of fluorescence and afm microscope. in the end, the characteristic of probe immobile ratio for oligonucleotide on glass surface is obtained through researching the internal relation of these two methods

    實驗選用表面平整的德國玻片，將清洗好的玻片分別進行羥基化、氨基化、醛基化，採用熒光法和原子力顯微鏡法分別檢測玻片表面預處理質量，研究兩種檢測方法之間的內在聯系，從而確定表徵玻片表面寡核苷酸探針固定率的方法。
  16. Microstructure of the composite layer was analyzed with help of optical microscope, scanning electronic microscope ( sem ), electronic probe microanalysis ( epma ) and x - ray diffraction ( xrd ). the compacting of the billet and the forming mechanism of the carbide reinforcement were studied based on thermodynamics and kinetics of reaction, sintering theory and the result of dta. at the same time, the wear - resistance of the composite layer was studied under condition of dry sliding friction

    利用光學顯微鏡、掃描電子顯微鏡、電子探針以及x -射線衍射儀，分析了表面復合層的基體組織結構；運用反應熱力學、動力學、粉末燒結理論和燃燒合成理論，結合差熱分析結果，探討了表面復合層壓坯的燒結緻密化原理和碳化物增強相的形成機理；利用坯塊在真空燒結爐不同溫度下的燒結出來的顯微組織分析，模擬出坯塊的燒結過程中的化學反應過程。
  17. In actual engineering applications, its wear resistance reduces due to the high temperature resulted from the continuous and heavy load service, which cannot fit the demand of engineering applications. based on the recent research throughout the world, in order to improve mechanical properties and wear resistance at high temperature of za27 alloy, si and mn are added to modify its microstructure. its microstructure and mechanical properties are tested and the sliding friction at ambient temperature and sliding friction at high temperature of znalsi and znaimn are studied

    本文研究了za系合金中應用最廣泛的za27合金，針對企業在工業應用過程中發現za27在中低速重載連續工作時，因溫升造成耐磨性下降，難以滿足工況要求的實際情況，為進一步提高其力學性能和高溫耐磨性，結合國內外研究現狀，在za27合金基礎上，添加si 、 mn合金元素調整合金的組織，通過顯微組織分析和常溫機械性能測試，以探索znalsi及znalmn合金常溫及高溫滑動摩擦條件下的摩擦特性。
  18. The topography and the nano - mechanical property of the sample before and after self - assembly was characterized by afm, and the factor attributed to the change was analyzed. based on the above conclusion, the nano - mechanical property of the sample fabricated with the technology based on the scratch of afm microprobe combining traditional self - assembly method was analyzed. it was proved that this method could carry out controllable self - assembly on silicon surface ; finally, the nano - mechanical property of the sample fabricated with the technology based on the cutting of diamond tool was measured, and this method was proved to be a quick and convenient mean that could carry out controllable self - assembly on silicon surface according to the nano - mechanical property of the samples fabricated by the two method before

    之後利用原子力顯微鏡對組裝前後的樣品進行了表面形貌和納米機械性能的表徵，分析了可能導致其變化的原因;藉助所得的結論，對基於原子力顯微鏡微探針的刻劃與傳統自組裝方法相結合的自組裝加工技術所制備的樣品進行了納米機械性能的分析，證明這種方法能夠實現硅基底上的可控自組裝;最後，對基於金剛石刀具切削的自組裝加工技術所制備樣品的納米機械性能進行了檢測，通過和前兩種方法制備的自組裝結構的納米機械性能進行對照，證明這種方法可以方便快捷的實現硅基底上的可控自組裝，從而實現「割草種花」的構想。
  19. 3. study of cnx nanotube cnx nanotube were synthesis by thermal decomposition of ammonium chloride and ethylenediamine in an na / hfo atmosphere, respectively. we found that there is more " bamboo - shaped " in cnx nanotube made with ethylenediamine

    根據透射電子顯微鏡和掃描電子顯微鏡觀察，分析了bcn納米管的微觀結構，掃描俄歇微探針分析表明， 860時，以鉆/二茂鐵為催化劑時生成的bcn納米管中b 、 c和n的原子比例為1
  20. Analyzing the present status of nano - structure machining, we find the main barrier to the three - dimensional nano - structure machining is the lack of the systemic thesis on machining depth. the micro - machining by micro probe can be divided into two processes : indentation and scratching

    本文通過分析國內外相關微納米加工技術的研究現狀，針對基於掃描探針顯微鏡的微加工系統中採用原子力微探針刻劃加工三維加工中亟待解決的加工深度問題，藉助理論、模擬以及實驗手段進行了研究。
分享友人
分享到 Line

分享到臉書