高度壓光 的英文怎麼說

中文拼音 [gāodùyāguāng]
高度壓光 英文
supercalendering
  • 高 : Ⅰ形容詞1 （從下向上距離大; 離地面遠） tall; high 2 （在一般標準或平均程度之上; 等級在上的） above...
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  • 壓 : 壓構詞成分。
  • 光 : Ⅰ名詞1 （照耀在物體上、使人能看見物體的一種物質） light; ray 2 （景物） scenery 3 （光彩; 榮譽） ...
  • 高度 : altitudeheightelevation
  1. A white led driver circuit is presented in this paper. the circuit drives up to four white leds with regulated constant current for uniform intensity. by utilizing proprietary adaptive 1x / 1. 5x modes and ultra - low - dropout current regulators, it maintains the highest possible efficiency over the full 1 - cell li + battery input voltage range

    整體電路以恆定電流驅動4隻白光led ，利用1倍/ 1 . 5倍分數型電荷泵和低壓差電流調節器，在整個鋰電池供電電壓范圍內保持最高的效率，並使四個白光led獲得均勻的亮度。
  2. The keying emery cloth page wheel of the living handle, adopt the domestic and top import emery cloth, brute force sticks, reliable craft production, it is open and adequate distribution while using has improved the precision of using, especially suitable for the aluminium alloy die casting, rubing the polishing of the complicacy superficy of the mould and so on high precise products

    採用國產頂級砂布及進口砂布，強力粘接，可靠的工藝生產，使用時呈開放均勻分佈，提高了使用精度，特別適用於鋁合金壓鑄件，模具復雜型面等高精產品的磨削拋光。
  3. A well-regulated power supply provides the high voltage for the photomultiplier.

    一個高度穩定的電源供給光電倍增管所需要的高壓。
  4. Intelligent multi - channel data - logging display controller adopt advanced microprocessor for smart control, it is suitable for display and control temperature, humidity, pressure, liquid level, instantaneous flow, speed and so on in many physical quantity inspect signal, and can data - logging multi - channel measure signal. it also can carry on high - accuracy linear correction to various non - linear input signals

    雙迴路數字光柱顯示控制儀採用先進的微處理器進行智能控制，適用於溫度濕度壓力液位瞬時流量速度等多種物理量檢測信號的顯示及控制，並能對各種非線性輸入信號進行高精度的線性校正。
  5. The blade inner channel cooling is a complex convection - conduction coupling problem. this thesis build a three - dimension. compressible turbulence model, and give a general solve method. with the geometrical model of the glossily rectangle straight channel, the rectangle straight channel with in - line arrays disturb plates, the rectangle straight channel with staggered arrays disturb plates, the rectangle straight channel with slant disturb plates, this thesis compute the flow and heat transfer condition when the cold air path though these channels, and gain the temperature field, pressure field, velocity filed, in addition. this thesis also analyze the influence of the different channel height, the different channel materials, the different channels, and gain the function relation between he nusselt number, friction factor and reynolds number. this thesis is emphasis on the new heat transfer enhancement structure, that is, disturb plates, with the comparison with the glossily channel and channel with pin fins, the heat transfer enhancement effect of the former is better, and the conclusion can be used in the design of aircraft blade

    葉片內部通道冷卻是一個復雜的對流?導熱耦合傳熱問題，本文在分析葉片內部通道冷卻的流動與傳熱情況的基礎上，建立了三維、可壓縮紊流的物理模型，得到了通用的求解辦法；利用不帶擾流片的矩形直通道、帶順排擾流片矩形直通道、帶叉排擾流片、帶傾斜擾流片的矩形直通道的幾何模型，計算了冷卻空氣通過這幾種通道時的流動與換熱情況，得到了各種不同情況下計算區域的溫度場、壓力場、速度場；在此基礎上分析了不同的通道高度、不同的葉片通道材質對葉片內部通道冷卻的影響，並整理得到了各種通道形式下，努謝爾數和阻力因子與雷諾數的函數關系；本文重點研究了新型的葉片內部通道冷卻強化傳熱措施?帶擾流片的內部冷卻通道的強化傳熱效果，通過與光滑矩形直通道、帶針肋通道的冷卻效果的比較，表明了這種新型鮚構的優勢，對于葉片內部通道冷卻結構的設計可以起到指導的作用。
  6. Qingzhou hengtai micro _ powder co. ltd uses the local rich dry fruit resources - walnut the outer covering, passed through a special system grain of craft, the research develops haspolished the special - purpose walnut shell powder product, natural didnot have the pollution, the chemical stability strongly by it, bearsthe acid and alkali, bears the pressure is high, does not contain the virulentobjectionable constituents, has uniquely escapes the dirt ability, thegranularity collection medium fine characteristic, caused the overseasmerchant highly to take, already the batch exported south korea

    青州市恆泰微粉有限公司利用當地豐富的乾果資源?核桃的外殼，經過特殊的制粒工藝，研究開發出了拋光專用核桃殼粉產品，以其天然無污染、化學穩定性強、耐酸堿、抗壓力高、不含有毒有害成份、有獨特的脫污能力、粒度集中等優良特性，引起了國外客商的高度重視，現已批量出口韓國。
  7. If the focal point of the len shifts around the surface of the sample, the mass ablation, the temperature of the plasma and the spectral intensity appear asymmetric and their maximum occur at the location which is about 0. 4mm under the surface of the sample. ( 2 ) to the plasma of the aluminum alloy sample, when the operating voltage is 1600v, the height from the observed location of the plasma to the surface of the sample is 2mm and the argon pressure is 660 torr, the spectral intensity have the maximum values

    （ 2 ）對于標準鋁樣品，在激光器工作電壓為1600v 、等離子體觀測高度為2mm 、氬氣壓力為660乇時，其譜線強度最強；以al 308 . 22nm 、 al 309 . 27nm兩條譜線為分析線，發現隨著環境氣壓的增大，譜線自吸效應明顯增強，當環境氣壓達到600 - 700乇時，譜線幾乎產生自蝕。
  8. In this experiment, a neodymium glass laser is used to study the effects of the operating voltage, power density, the height from the observed location of the plasma to the surface of the sample, the location of the sample, the gas composition and the pressure on the intensity and quality of the spectrum

    本文採用高能量釹玻璃激光器，研究了激光器工作電壓、功率密度、等離子體的觀測高度、樣品位置、環境氣體及氣壓對等離子體的譜線強度及譜線質量的影響，獲得了最佳的實驗條件，並測量了金屬分析樣品中某些元素的含量。
  9. The interface behavior between essence and ethylene - vinyl acetate copolymer pallets was studied so that necessary data were obtained to guide the preparation of fragrant masterbatch. the adsorption type and wettability between essence and the copolymer pallets were analysed by measurements of fourier transform infrared spectrum, surface tension, contact angle and specific surface area. the technical factors affecting absorptivity such as the charge ratio, temperature, pressure and stirring speed were studied by series of adsorption experiments. the results showed that the adsorption of essence on the surface of ethylene - vinyl acetate copolymer pallets is physical in nature. essence couldn ' t moisten the surface of ethylene - vinyl acetate copolymer pallets absolutely, but it could be soaked into the surface of the pallets partly. adsorptivity could be increased by enhancing the temperature, pressure and stirring speed, but the extension of adsorption time had little influence on adsorptivity

    研究了香精與乙烯/醋酸乙烯共聚物粒子之間的界面行為，以便為香型母粒的制備提供必要的理論依據.利用傅立葉變換紅外光譜、表面張力、接觸角及比表面面積等測定手段，分析了香精與載體之間的吸附類型和潤濕作用.並通過一系列吸附實驗，討論了配料比、溫度、壓力、攪拌等工藝條件對吸附量的影響.結果表明，香精在乙烯/醋酸乙烯共聚物粒子表面的吸附為物理吸附；香精無法完全潤濕載體粒子表面，但可以對其形成部分浸潤；提高溫度、壓力、攪拌速度可以增加吸附量，而延長吸附時間對增加吸附量貢獻不大
  10. Abstract : the interface behavior between essence and ethylene - vinyl acetate copolymer pallets was studied so that necessary data were obtained to guide the preparation of fragrant masterbatch. the adsorption type and wettability between essence and the copolymer pallets were analysed by measurements of fourier transform infrared spectrum, surface tension, contact angle and specific surface area. the technical factors affecting absorptivity such as the charge ratio, temperature, pressure and stirring speed were studied by series of adsorption experiments. the results showed that the adsorption of essence on the surface of ethylene - vinyl acetate copolymer pallets is physical in nature. essence couldn ' t moisten the surface of ethylene - vinyl acetate copolymer pallets absolutely, but it could be soaked into the surface of the pallets partly. adsorptivity could be increased by enhancing the temperature, pressure and stirring speed, but the extension of adsorption time had little influence on adsorptivity

    文摘:研究了香精與乙烯/醋酸乙烯共聚物粒子之間的界面行為，以便為香型母粒的制備提供必要的理論依據.利用傅立葉變換紅外光譜、表面張力、接觸角及比表面面積等測定手段，分析了香精與載體之間的吸附類型和潤濕作用.並通過一系列吸附實驗，討論了配料比、溫度、壓力、攪拌等工藝條件對吸附量的影響.結果表明，香精在乙烯/醋酸乙烯共聚物粒子表面的吸附為物理吸附；香精無法完全潤濕載體粒子表面，但可以對其形成部分浸潤；提高溫度、壓力、攪拌速度可以增加吸附量，而延長吸附時間對增加吸附量貢獻不大
  11. The tests of e - o applications by our flux ktp has been realized, the results showed : optical waveguides fabricated by using an ion - exchange process, which have an exchange - ion concentration depth profile and refractive - index profile, is close to a complementary error - function distribution, optical homogeneity and device thermal stability is much better. amplitude modulation switch formed by our flux ktp has the contrast ratio of 150 : 1 and insert loss is 2. 5 % at 1064 nm. high quality optical pulse with 1 ns width was cut successfully by using an e - o modulator from a laser pulse with 50 ns width, this modulator had run for three years, and the crystal did n ' t blackened, it showed our low conductivity flux ktp can endure high modulation voltage for a very long time

    Ktp晶體的電光應用試驗表明：用離子交換法製作的電光波導，其離子交換濃度、折射率變化符合餘弦誤差函數，光學均勻性以及器件的溫度穩定性較好；製作的強度調制電光開關，消光比為150 ： 1 ，對1064nm激光的插入損耗為2 . 5 ；製作的電光調制器用於激光脈沖整形試驗，從脈沖寬度50ns的激光脈沖削出脈寬1ns的高質量光脈沖，該電光開關經過長達三年多的使用，沒有出現晶體變黑現象，說明本實驗的低電導率ktp晶體能夠耐受長時間的調制電壓。
  12. The main work can be summed up as follows : firstly, we studied the thermal - field properties of vcsels, and analyzed the influences of current spreading, material parameters and operating conditions on the temperature distributions. secondly, we began with the electrode voltage and calculated the equipotential s distributions, compared the distributions of voltages and current densities in different depths of vcsels, and then studied the influences of the oxide - confining region with different position or thickness, and the different sizes of the gain - guided aperture and emitting window on the distributions of the injected current density, carrier concentration and temperature in the active region. thirdly, we realized the coupling of electricity, optical and thermal - fields, worked out the threshold voltage, calculated the distributions of the injected current density, carrier concentration and temperature under different offset voltages, and analyzed the impacts of temperature profile and carrier density on the refractive index, fermi levels and optical - field

    具體工作可以概括如下：首先，研究了vcsel的熱場特性，分析了電流擴展，材料參數和工作條件對于溫度分佈的影響；其次，從電極電壓入手，計算出激光器中的等勢線分佈，並對不同深度處的電壓和電流分佈進行比較，研究了高阻區的不同位置和不同厚度、限制層和出射窗口半徑的大小對電流密度、載流子濃度和溫度分佈的影響；再次，實現了電、光、熱耦合，求出了閾值電壓，計算了不同偏置電壓下的電流密度分佈、載流子濃度分佈和熱場分佈，分析了溫度和載流子濃度變化對折射率、費米能級和光場的影響；最後，給出了考慮n - dbr和雙氧化限制層時激光器中的等勢線分佈，分析了n - dbr和雙氧化限制層對vcsel電流密度、載流子濃度、溫度和光場分佈的影響。
  13. The tianshan series stone has the characteristics such as bright color and lustre, high degree of finish, compression and wear resistant, good ventilation property, even color, low radioactivity etc., which belongs to high grade decoration products

    天山系列石材具有色澤艷麗、光潔度高、抗壓耐磨、透氣性好、色澤均勻放射性低等特點，屬高檔裝飾品種。
  14. The properties of cn thin films such as their morphology, component, crystal structure and the bonding structure and the relation between those properties and the gas - phase reaction parameters were discussed, showing that the deposition of p - c3n4 thin film is the compete result of various reaction processes in the dynamics balance conditions ; the process of cn films depo sition is diagnosed in situ through the optical emission spectra technique, the effects of experimental parameters on the concentration of the precursors and the gas - phase reactions in the plasma have been obtained ; the main reaction precursors for film deposition identified ; the relation between the characteristics of cn thin films and the reaction process in the plasma is analyzed. the cn thin films deposition under different substrate temperatures in high pressure pe - pld shows that the si atom of the substrate has participated the cn films growth process, based on this the growth mode of cn thin films on the si substrate is proposed. the further experiment of cn thin films deposition on si substrate scratched by diamond as well as covered with fe catalyzer has been attempted, which indicates that changing the dynamics conditions of the surface reaction can alter the growth characteristic of the cn thin films and can enhance obviously the films growth rate

    採用pld技術進行了碳氮化合物薄膜沉積，得到了含氮量為21at的cn薄膜；研究了襯底溫度和反應氣體壓強對薄膜結構特性的影響，給出了cn薄膜中n含量較小、 sp ~ 3鍵合結構成分較少和薄膜中僅含有局域cn晶體的原因；引入脈沖輝光放電等離子體增強pld的氣相反應，給出了提高薄膜晶態sp ~ 3鍵合結構成分和薄膜的含n量可行性途徑；應用pe - cvd技術以ch _ 4 + n _ 2為反應氣體並引入輔助氣體h _ 2 ，得到了含n量為56at的晶態cn薄膜；探討了cn薄膜形貌、成分、晶體結構、價鍵狀態等特性及其與氣體壓強和放電電流的關系，證明了- c _ 3n _ 4薄膜沉積為滿足動力學平衡條件的各種反應過程的競爭結果；採用光學發射譜技術對cn薄膜生長過程進行了實時診斷，得到了實驗參量對等離子體中活性粒子相對濃度和氣相反應過程的影響規律，給出了cn薄膜沉積的主要反應前驅物，揭示了cn薄膜特性和等離子體內反應過程之間的聯系；採用高氣壓pe - pld技術研究了不同襯底溫度條件下cn化合物薄膜的結構特性，揭示了si原子對薄膜生長過程的影響，給出了si基表面碳氮薄膜的生長模式；在金剛石研磨和催化劑fe處理的si襯底上進行cn薄膜沉積，證明了通過控制材料表面動力學條件可以改變碳氮薄膜結構特性，並可顯著提高晶態碳氮材料的生長速率。
  15. Selective absorption of electromagnetic wave. adw employing gases which do n ' t absorb the laser energy can form a gas urtain " whose pressure of the two sides is equal to the low pressure of laser cavity and the ambient circumstance pressure respectively so it can isolate the higher pressure ambient air from entrancing into the laser cavity and maintain the hel ' s running normally

    氣動窗口利用對激光器輸出波長沒有任何吸收作用的特殊氣體作為窗口工作介質，並根據氣體動力學部分相關原理，能生成一個具有與激光腔低壓和環境大氣高壓相匹配的壓力梯度、並把激光器低壓工作介質和外界大氣相隔離的「氣幕」 ，從而保證高能激光器的正常工作。
  16. Double - loop digital light column display controller adopts advanced microprocessors for smart control, and it is suitable for display and control for many variables such as temperature, humidity, pressure, liguid level, instantaneous flow, speed, and so on, as well as can carry out the linear calibration with high accuracy for various non - linear input signals

    智能數字光柱顯示控制儀採用先進的微處理器進行智能控制，適用於溫度濕度壓力液位瞬時流量速度等多種物理量檢測信號的顯示及控制，並能對各種非線性輸入信號進行高精度的線性校正。
  17. Electrically and thermally similar to type 410, but is calendered under different conditions, which produce a strong, but more flexible and conformable sheet with open surface

    和t410相比，電氣同耐熱性相似，分別在於壓光時的情況不同，生產出強度高但柔軟度好的製品。
  18. On construction of optical tweezers, a dual - optical tweezers system was set up using a ti - sapphire laser. the optical trap steering and sample micro - manipulation systems were constructed. the displacement and force measurement systems were incorporated, and displacements of nanometers and forces of picnewtons can be detected

    所謂光鑷就是利用光的壓強效應，由一束高度會聚的激光形成的光學勢阱，利用它可以對單個細胞、生物大分子等微小物體實現非接觸、無損傷操作。
  19. However, the development of digital collective system must have attained high level, which includes optics, electronics and mechanics etc. by the progress of compression technique and hd disc technique

    當然，隨著壓縮技術及高密度光盤技術的進步，集光學、電子學、機械等多學科於一身的數字拾取系統的設計也必將達到新的高度。
  20. Secondly, the cfd method is used to study the flowfields in the laser chamber and the loss of the total pressure in several types of nozzles. the answer shows that reducing the length of the nozzles and the high of the throats in the nozzles can reducing the loss of the total pressure. and the answer also shows that the small nozzles with helium injected in the base region are good for laser chamber pressure recovery

    其次，本文利用cfd技術模擬了光腔流場，研究了幾種噴管的總壓損失特性。研究結果表明，對于平面對稱噴管，減小噴管長度，增加喉道高度有利於減少總壓的損失。用cfd技術對光腔段的模擬表明，採用小尺寸噴管，並且在基區大量注入氦氣有利於激光器壓力恢復。
分享友人
分享到 Line

分享到臉書