高淬 的英文怎麼說

中文拼音 [gāocuì]
高淬 英文
cui gao
  • 高 : Ⅰ形容詞1 （從下向上距離大; 離地面遠） tall; high 2 （在一般標準或平均程度之上; 等級在上的） above...
  • 淬 : 動詞（淬火） temper by dipping in water, oil, etc. ; quench
  1. There are many large - size air hammers, blast furnaces and costing equipment including all sorts of heat treatment equipment, costing equipment including all sorts of heat treatment equipments

    我們有大型空氣錘多臺，有足夠的冶煉高爐鑄造設施有淬火退火回火各種熱處理設備。
  2. In our company we have forging, costing and heat treatment workshops with advanced producing equipments. all the tasks which refused by the other companies will be done well here. there are many large - size air hammers, blast furnaces and costing equipment including all sorts of heats treatment equipment, costing equipment including all sorts of heat treatment equipments

    我公司下屬鍛造鑄造熱處理加工廠各一座，有先進的生產設備，可以接收其它部門不願承攬，甚至不敢承攬的艱巨任務，我們有大型的空氣錘和高爐冶煉鑄造設施和場地，有淬火退火回火各種熱處理設備。
  3. Standard specification for high hardenability antifriction bearing steel

    高淬透性耐磨軸承鋼標準規范
  4. With carbureted high - strength good - quality alloy, the series has the feature of high - efficiency and long life - span, high permissible axial and radial loads, low noise, high reliability and compact structure and so on configuration modality

    採用高強度優質合金鋼滲碳游淬火，具有高效率高壽命輪及高許用軸向，徑向載荷，運行噪音低，可靠性高，結構緊湊等優點。
  5. Exercisable processes : heat treatment of work - pieces in the form of long pole, metal of strict distortion requirement and bad hardenability

    實例：特別適合於長桿類型零件對變形要求嚴格且淬透性不高的零件的熱處理。
  6. Tight scale is usually a problem encountered in forgings hardened from direct - fired gas furnaces having high - pressure burners

    用高壓爐頭直燃煤氣爐對鍛件進行淬火時，通常會出現鱗片問題。
  7. Heat treatment equipment high vacuum gas oil quenching oven

    熱處理設備：高真空氣油淬兩用爐
  8. Two kinds of n - substituted pyrrole ( trimethyl - ( 2 - pyrrol - l - yl - ethyl ) - ammonium iodide and 2 - ( 2 - pyrrol - 1 - yl - ethoxy ) - ethane - sulfonate sodium ) were synt hesized ; poly ( trimethyl - ( 2 - pyrrol - l - yl - ethyl ) - ammonium iodide ) / v2os nanocomposites were synthesized by two methods ( monomer in - situ intercalate polymerization and polymer intercalation in solvent ). to fabricate vaos sol by melt quenching, oxygen top - blend technique was applied to improve oxygenic part - pressure, decrease the oxygenic anoxic and restrain the increase of v4 + ion when vos was melted. the xos xerogel prepared by the new technique had more complete structure than the vos xerogel which v20s powder was melted in the air

    針對以v _ 2o _ 5為原料、熔融淬冷法合成v _ 2o _ 5溶膠、制備v _ 2o _ 5干凝膠薄膜這一方法，提出了在v _ 2o _ 5熔融時運用氧氣頂吹工藝這一思路，目的是增加熔體表面的氧分壓，減少熔體的氧缺損，使v _ 2o _ 5干凝膠的v ~ （ 5 + ）離子含量更高、其結構更完整、性能更穩定。
  9. High - frequency induction quenching machine

    高頻感應淬火機床
  10. The result shows that the quenching inductor with wimble magnet inlaid is adaptable for this technique, and the vertical quenching machine can be used in mass production

    結果表明，帶錐角鑲嵌導磁體的圈式感應器，其有效圈高度、錐角和內徑的合理匹配可以滿足淬硬層形態的要求，採用立式淬火機床連續淬火可以大批量生產合格的半軸。
  11. Our company dominating products cover : 1. high - frequency heating equipment ; 2. high - frequency medium heating equipment ; 3. whole - solid high and moderate frequency power ; 4. quenching machine tool and moderate frequency power

    本公司主要產品為： 1 、高頻感應加熱設備、 2 、高頻介質加熱設備、 3 、全固態高中頻電源、 4 、淬火機床及中頻電源。
  12. High strength, quenched, and tempered structural steels

    淬火和回火的高強度結構鋼
  13. Our company endeavors to quenching & tempering, normalizing, tempering, high and medium temperature quenching, mesh belt furnace quenching, carbonizing, aging subzero and high temperature heat treatment, etc

    本公司是一家致力於從事調質、正火、回火、高中溫淬火、網帶爐淬火、滲碳、時效冰冷及其高溫熱處理的廠家。
  14. Chromium - vanadium steel wire rod, wire and springs - high duty ground wire - hardened and tempered - specification

    鉻釩鋼盤條金屬絲和彈簧.高負荷地線.淬火和回火.規范
  15. Smooth tempered glass is manufactured by heating up float glass to swiftly and uniformly, with this special heat treatment and quenching process which increases glass strength up to four to five times vs, annealed glass, in case stresses beyond its capacity, smooth tempered glass simply disintegrates into innumerable small pieces, significantly reducing the risk of serious injury

    鋼化玻璃是將浮法玻璃經過物理性淬火處理，使其表面形成均勻的壓應力，而內部則形成張應力，從而有效的提高了玻璃的抗彎和抗沖擊性能，強度達到了普通玻璃的3 - 4倍，當其破碎時則分裂成均勻純角不易傷人的小顆粒，使其成為一種現代生活中理想的安全玻璃。
  16. Abstract : in this paper, the surface of the ore milling roller was quenchedby the laser, so that increase its surface rigidity and improve its antiwear properties, and prolong its life

    文摘:應用激光束對磨輥表面進行淬火處理，提高磨輥表面硬度，增強磨輥的抗磨損性能，從而達到延壽的目的。
  17. Through analysis of the change of the specifications of the clothing wires made of alloy steel before or after the tempering process, the paper puts forth that installation of tempering device after the punching and quenching process is helpful to better quality of clothing wires, improving the color difference of clothing and prolong the service life of clothing

    摘要通過分析合金鋼針布齒條回火前後各項指標的變化，指出在沖淬工藝后加裝回火裝置有助於提高金屬針布性能，改善針布齒條色差，延長其使用壽命。
  18. Abstract : the structure and the properties of the grinding ball made of the composite cast iron have been researched in this paper. the result indicates that added trace boron and a proper quantity copper to this kind of composite cast iron can increase its quench - hardening ability, and raise its hardness and impact toughness

    文摘:研究了一種復合鑄鐵磨球的組織和性能，結果表明，化學成分和淬火工藝對這種復合鑄鐵磨球的組織和性能有很大影響，微量的硼和適量的銅可以明顯地提高磨球的淬透性，經過余熱淬火得到貝氏體或馬氏體基體組織，從而提高磨球的硬度和沖擊韌性。
  19. 5. the comprehensive capacities of the azsm alloy were markedly promoted than that of the as - cast azsm alloy which was aged at 200 ?, air - cooled and furnace - cooled after solid - solution, aged at 90 ? and aged in nature after solid - solution

    5 ）鑄態azsm合金經200時效3小時、固溶4小時后空冷和爐冷、 400固溶-水淬90時效和自然時效的綜合性能較鑄態有顯著的提高。
  20. Near b - titanium ti - 1023 alloy of high - strength, good fatigue strength and excellent hardenability has both a relatively low 3 - transus temperature ( 798c ) and a low forging temperature range, which make it suitable for superplastic isothermal forging to manufacture complex forge pieces

    Ti - 1023合金屬于近型鈦合金，具有高強、高韌、高淬透性等特點，而且它的相變溫度（ 800左右）和鍛造溫度均較低，非常適合於採用超塑性等溫模鍛方法製造復雜鍛件。
分享友人
分享到 Line

分享到臉書