高粘性流體 的英文怎麼說

中文拼音 [gāoniánxìngliútǐ]
高粘性流體 英文
high viscosity fluid
  • 高 : Ⅰ形容詞1 （從下向上距離大; 離地面遠） tall; high 2 （在一般標準或平均程度之上; 等級在上的） above...
  • 粘 : 粘動詞（粘附） glue; stick; paste; adhere to; bond
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 流 : Ⅰ動1 （液體移動; 流動） flow 2 （移動不定） drift; move; wander 3 （流傳; 傳播） spread 4 （向壞...
  • 體 : 體構詞成分。
  • 高粘性 : high viscosity
  • 流體 : [物理學] fluid; fluor流體力學 fluid mechanics; hydromechanics; 流體生物學 hydrobiology; 流體運動學 hydrokinematics
  1. Through the special studies on impacts to atomizing and humidifying effect from such factors as the firing pin type, centrifugal structure, higher spraying pressure, less aperture, initial water temperature and original state of the air, some conclusions are obtained, such as : the centrifugal nozzle with firing pin type, high pressure and little aperture has bigger air eddy and atomizing angle. the spaying liquid has high velocity. the droplet is small, and the heat and mass transfer velocity is high

    通過對撞針型結構、離心式結構、較高的噴水壓力、較小的噴嘴孔徑、噴水初溫及待加濕空氣初狀態對霧化加濕效果的作用原理的重點分析，得到：撞針型高壓小孔徑離心式噴嘴具有較大的空氣渦與霧化角，噴出的液體流速高、液滴小、水與空氣傳熱傳質速率高，撞針型結構提高了霧化加濕效率，高壓小孔徑的特點為霧化加濕提供了較大的能量，而噴水初溫的升高會減小水的粘性力和表面張力，從而優化加濕效果。
  2. Ultrasonic has being attracted much attention gradually in fuel atomization because of some specialities of cavitation and infection on liquid flow. in the course of atomization of pitchy oil, especially, does it show greatly its advantage, but its material atomizational mechanism need research ulteriorly. the primary content of this thesis is about adding cantilever reed to effervescent atomizer so as to combine ultrasonic and effervescent. this thesis has discussed ultrasonic some mechanism, ultrasonic dynamical procreator, effervescent and liquid mucosity infection on atomization, at the some time we make some experiments and discuss atomization rule following some machinery parameter and run parameter so as to find some rule about ultrasonic atomization and to rich the research of ultrasonic atomization mechanism. all that will be beneficial to the design about ultrasonic atomization atomizer

    超聲波由於其空化機理及對液體的流變性影響等特性，在燃油霧化燃燒中逐步引起人們的重視，尤其在重渣油等高粘度液體的霧化過程中逐步顯示出其優越性，但其具體的霧化機理還需要做進一步的研究在氣泡霧化噴嘴基礎加入懸臂式簧片哨，將超聲波與氣泡霧化相結合是本文討論的主要內容本文從研究超聲波的一些機理入手，討論了超聲動力發生器氣泡霧化以及液體粘度對霧化質量的影響，並通過具體的實驗，根據實驗數據來討論霧化質量隨各種結構參數運行參數的變化規律，以便找到超聲霧化的一些規律，豐富對超聲霧化機理的研究，對超聲霧化噴嘴的設計具有一定的指導意義。
  3. At the same time we study, analysis and discuss the action that non - linearity - stickiness - springiness and crazing damage of the pmma sample under creep though making us of the knowledge about the high molecule physics the damage theory of material of rheology of bodies with defects. through the study and theory analysis of single - axes stretching experiment in pmma sample under creep, take the surface crazing damage density of pmma sample as an variable, to look for a commonly rule that the crazing damage of pmma, and to offer a feasible damage model for the sake of study that of pmma ' s remoteness damage

    同時運用高分子物理、含缺陷流變性物體的材料破壞理論等知識，對無孔洞pmma試件和有孔洞pmma試件蠕變條件下非線性粘彈性行為及其銀紋損傷現象進行了研究、分析與探討，通過對蠕變條件下的pmma試件的單軸拉伸實驗研究和理論分析，以pmma試件的銀紋損傷面密度值為損傷變量，來嘗試尋求pmma銀紋損傷的一般規律，為研究pmma的細觀損傷提供了一種可行的損傷模型。
  4. By using the larger magnetic permeability, magnetic fluid was used to improve the magnetic circuit efficiency in torque motor, enlarge the output torque and displacement of torque motor, and the output flow of servo valve. correspondingly, the ability of noise - overcoming and system damping was enhanced due to the property of magnetic fluid. as a result, the stability of servo valve and servo - control system can be improved

    由於磁流體具有較大的導磁率，可提高力矩馬達磁路效率、增大力矩馬達的輸出力矩和位移，從而增加伺服閥的輸出流量;同時，利用磁流體的粘度特性，可增強力矩馬達阻尼及抗干擾能力，從而增強伺服閥及伺服控制系統的穩定性。
  5. In modern aircraft design, there is an urgent requirement for accurate, efficient and easy - use aerodynamic data and computational analysis tools. however, the euler codes are not satisfied all the demand for simulating the complex flow - fields. more powerful tools solving navier - stokes ( n - s ) equations are longed for viscous effect, more accurate and more detail information of flow - fields

    現代飛機設計迫切需要計算流體力學為其提供準確、高效和實用的氣動數據以及流場分析工具，已經不再滿足於僅採用euler方程進行數值模擬，它要求數值求解navier - stokes （ n - s ）方程組以模擬粘性效應，提供更加準確而詳實的流場信息。
  6. The sort, material composite, structure properties and conduction mechanisms of eca ( electrical conductive adhesive ) were discussed in this paper. then three types of ega specimens were designed and made, on which temperature cycles test from - 55 ? to + 125 ? and thermal aging at + 125 ? were carried out. changes of the adhesive strength, eca ' s bulk resistance and contact resistance under the environment stress were summarized and a detailed evaluation on these specimens was given

    本文在全面闡述導電膠的分類組成、物理結構、導電機理的基礎上，設計並製作了三批導電膠樣品，通過對樣品進行長時間的- 55 ? ? + 125溫度循環和125高溫存儲試驗，總結了導電膠粘接強度、體電阻和接觸電阻在環境應力下的變化規律，對三類樣品的長期可靠性做出了全面的評價，並結合導電膠電阻率和「穿流閾值」的計算機模擬，給出了提高導電膠可靠性和電導率的建議，介紹了國內外在高電導率高可靠性導電膠研製方面的一些最新進展。
  7. Based on the principles of designs of self - compacting and light aggregate concrete mix, sclc of lc30 - lc50 was developed by using absolute volume method. the main factors affecting the workability of sclc were studied by adopting the modified l - 800 fluidity instrument. the results indicate that the key techniques insuring good workability of sclc are about 30 % first - grade fly ash, about 50 % volume sand ratio, 2 % ~ 6 % dosages of silicon fume and compounded superplasticicizers with viscous ingredient

    採用改進l - 800流動儀，研究了影響lc40自密實輕骨料高性能混凝土工作性的主要因素，結果表明：粉煤灰摻量保持30左右，硅灰摻量為2 6 ，體積砂率為50左右和摻加具有粘塑組分的復合高效減水劑是保證sclc拌合物具有較好工作性的關鍵。
  8. In order to improve diamond fine powder sinter ' s mechanical property, using the present laser technique, high power transverse co2 laser is used to sinter diamond fine powder compact to study the integrating capability in the sinter between diamond fine powder and metallic powder, microstructure and the forming mechanism of microstructure in the different laser technical parameters

    摘要為了改進金剛石微粉燒結體的機械性能，利用現有的激光技術，採用高功率橫流co2激光燒結金剛石微粉壓坯，研究在不同的激光工藝參數下，燒結體中的金剛石微粉與金屬粉末粘結的結合性能、微觀結構以及形成機理。
  9. Stirring viscosimeter is employed to research the rheological property of fresh cement paste with different superplasticizers

    用旋轉粘度計法研究了摻加不同高效減水劑的新拌水泥漿體的流變性能。
  10. According to the practical geological model of slope, by means of the finite element analysis, from the constitutive equations of the elastoplasticity and the viscoelasticity - viscoplasticity, the process and mechanism for progressive failure of the locked segment of rockmass are quantitatively revealed and simulated during the rupture, deformation, destruction, and failure of highsteep slope rockmass, and the dynamics driving the motion of rocky landslide with violent starting velocity by high pressure water flow is dealed with

    根據邊坡實際地質模型，基於彈塑性與粘彈-粘塑性理論的本構方程，通過有限元模擬分析，定量地揭示和模擬再現了高邊坡巖體破裂、變形、破壞及失穩前後鎖固段巖體漸進性破壞的機制和過程，探討了高壓水流作用下滑坡啟程劇動的破壞機理。
  11. Through analyzing the effect of temperature and nitrogen on crude oil viscosity the influences of different nitrogen injection volume and injection modes on steam displacement are contrasted, the mechanism of nitrogen - assisted steam stimulation is clarified, which includes : heat carrying capacity is raised, the saturation of remaining oil is reduced after nitrogen - assisted injection is made ; crude oil flow is enhanced because of nitrogen compression and dispersion and the change of oil flow shape ; water back - production rate is improved by expanding the steam sweep volume and compensating in - situ energy ; steam distillation effect is enhanced

    通過分析溫度、氮氣對原油粘度的影響，對比不同注氮量、不同注入方式等對蒸汽驅油效果的影響，弄清了氮氣輔助蒸汽增產的機理主要表現在：氮氣輔助后增加攜熱能力，降低殘余油飽和度，氮氣的壓縮膨脹作用分散和改變了原油流動形態，增強了原油流動性；擴大蒸汽的波及體積，補充地層能量，提高回採水率，強化蒸汽蒸餾效應。
  12. Based on prandtl ' s momentum transportation, this paper calculates in detail the physical quantities such as eddy viscosities, and ratio of eddy viscosity to motion viscosity, total stresses with respect to relative position in three regions of viscous sub - layer, buffer layer, and main turbulent stream for non - newtonian fluid flowing turbulently in ducts, which according to karman ' s three layer models and measurement of fluid parameters in evaluation apparatus, discusses the influence of polymer drag reduction on flowing properties of non - newton fluid, analyzes quantitatively principle of turbulent reduction phenomenon and condition of increasing reduction rate

    摘要以普蘭德動量傳遞理論為基礎，按照卡門的三層模型，通過室內模擬環道用0號柴油及加入減阻劑在圓管內的流動參數的測定，計算了非牛頓型流體管內湍流邊界層的層流內層、過渡層、湍流中心的渦流粘度，渦流粘度與運動粘度比、總應力隨相對位置的變化等定量參數，探討了高分子減阻劑對非牛頓流體流動特性的影響，對湍流減阻現象的機理與增大減阻率的條件進行了定量分析。
  13. Organic bentonite - yh - 958 introduction : yh - 958 organic bentonite is the self - active organic bentonite. it can be added in every step of compounding paint, it no needs pre - gel or polar activator, it has perfect rheological, anti - settling and sag prevention. besides the characters of the other yh bentonite, yh - 958 function well in high gravity, low viscosity pigment solvent system

    Yh - 958和978產品是國內首創的自活化有機膨潤土，可在調漆的任何階段加入，無需預凝膠和極性活化劑，分散細度可在20um以下，可用於面漆和底漆，提供油漆體系理想的流變性能，控制沉降和流掛，除具備同類產品的特點以外， yh - 958在較少添加量，低粘度的高比重顏料體系中形成微弱的絮凝結構，防止顏料沉結
  14. Electrorheological fluids ( erf ) consists of a suspension of high dielectric particles in a liquid of low dielectric constant. with the action of the applied electric field, particles interact with each other. the viscosity of erf increases dramatically and the erf turns into solid

    電流變液是由高介電常數、低電導率的電介質顆粒分散於低介電常數的絕緣液體中形成的懸浮體系，具有通過調節電場強度改變表觀粘度和屈服應力的機電耦合特性。
  15. However, the effect of high particle concentration on particle collision should be taken into account in the dense gas - solid two - phase flow. at the same time, gas turbulence should be taken into account in the simulation of gas flow in dense gas - solid two - phase flow

    然而，在高顆粒濃度下顆粒碰撞對的確定需要考慮高顆粒濃度存在的影響，同時在高顆粒濃度流化床氣固兩相流動中，需要考慮氣體粘性的作用。
  16. For simplicity, these assumptions are followed in the simulation : 1 ) the coronary artery is modeled as rigid tube with constant cross section ; 2 ) the blood is assumed as viscous incompressible newtonian fluid without weight ; 3 ) the blood flow is developing laminar and becomes fully developed at far downstream

    實際生理條件下，血液是粘彈性流體，但據文獻表明，只要血管直徑不太小，血液粘彈性對流動的影響不大，可以忽略不記，本文也吸收了這一結論以簡化非關鍵過程，以提高工作效率。
  17. Kaolinite - organic intercalation compound possesses not only the unique adsorptivity, dispersivity. porosity, rheological behaviour and surface acidity of the clay mineral but also the multivariate functional groups and the reactivity of the organic compound. as a new type of mineral materials, it has extensive potential application in catalysts, functional supporter, adsorbents and advance ceramics

    高嶺石有機插層復合物既具有粘土礦物特有的吸附性、分散性、流變性、多孔性和表面酸性，又具有機化合物的多變功能團和反應活性，作為新型礦物材料，在催化劑、功能載體、吸附劑、先進陶瓷材料等方面具有廣闊的應用前景。
  18. Plastic deformation happened in the worn surface where fe element was found, so pam micro - fiber supported part of the load and prevented the further deformation. on the condition of high speed and high load, the worn surface of pam1 / nylon 6 composites was nearly melted and formed comparative uniform transfer on the surface of steel, which accounted for the rather low wear mass loss. the infrared analysis showed that the a small quantity of transition of crystal form from into of nylon and its composites happened during the friction because of the high temperature and strong sheering strength

    通過對復合材料耐磨性能研究表明：復合材料的摩擦系數隨載荷的增加而逐步下降，且磨損表面有明顯的塑性變形；從能譜分析結果來看，復合材料表面有fe的存在，表明pam微纖承受了部分載荷，並阻止了基體的進一步塑性變形及粘著轉移；在高速高載時， pam1 /尼龍6磨損表面處于粘流態，並在鋼環表面形成了連續的轉移膜，表現出較好的耐磨損性能，且在高溫和強剪切力的作用下，材料基體發生了少量的晶體向晶體的轉移。
  19. Remarkably, the temperature must be limited between softening point and solidification value, at which the bond can get perfect fluidity and stickiness. effects of bond content and pressure on magnet product during heating - pressing process are the same with effects during common - pressing process. fourthly, it is more than 250 hours before magnet is eroded when it is coated with lacquer by way of cathode electrophoresis

    溫度對溫壓效果影響明顯，應當選擇在粘結劑軟化點以上、固化反應前的某一點，保證粘結劑具有適當的粘度和良好的流動性；與普通壓制工藝相同，溫壓工藝制備的粘結磁體密度和磁性能均隨壓制壓力的增大而提高，磁體性能和磁粉體積分數隨粘結劑含量變化的規律一致。
  20. Low viscous drag and high - speed capability : the low viscous drag of the magnetic fluid, and non - contacting seal configuration of the magnetic fluid feed through assure its extremely smooth operation and its high - speed capabilities

    低阻尼和高速旋轉能力：磁性流體極低的粘滯阻力和磁性流體進行給裝置無需接觸密封圈的結構，決定了它的穩定操作和高速轉動。
分享友人
分享到 Line

分享到臉書