點陣變形 的英文怎麼說

中文拼音 [diǎnzhènbiànxíng]
點陣變形 英文
lattice deformation
  • 點 : Ⅰ名詞1 （液體的小滴） drop （of liquid） 2 （細小的痕跡） spot; dot; speck 3 （漢字的筆畫「、」）...
  • 陣 : Ⅰ名詞1 （作戰隊伍的行列或組合方式） battle array [formation]: 布陣 deploy the troops in battle fo...
  1. The algorithms estimate the doa of the broadband distributed source fron the secondary diagonal elements of the covariance matrices generated from every frequency domain of the received broadband signals, thus avoiding unwrapping of phases

    該類演算法首先將陣列接收的寬帶信號變換到頻率域，然後對于每個頻率形成陣列接收信號協方差陣，最後由該協方差陣的次對角線元素估計寬帶分佈源的到達角，其主要特點是避免了相位展開。
  2. Calculation of special point - set for deformed body - centered tetragonal lattice

    變形體心四方點陣特殊點集的計算
  3. Considering the shape of quantum - wires, the modal x - ray diffraction of trapeze quantum - wire is established. the relationship between fourier transforms quantum wires shape and x - ray diffraction is presented to obtain the more exact info of parameters. so the fundamental characteristics of x - ray diffraction for quantum wire array are investigated

    考慮到量于線的形狀，建立了梯形量子線的x射線衍射模型，得出量子線的形狀與x射線衍射之間互為傅立葉變換的關系，從模擬的結果得到更為精確的參數信息，從理論上認識了量于線陣列的x射線衍射的最基本特點。
  4. Due to the moving base existence of the minehunting and the frame structure characteristic of the sonar array, a new modeling thought in which the boat body coordinates is regarded as moving coordinates and the whirligig equation of sonar array compared with the self coordinates is founded on the basis of the euler ' s theorem and the coordinate transform is introduced. the dynamic equations of minehunting sonar array with the state matrix form are founded by settling the dynamic models with the vector form. so it offers theory foundation for analyzing the dynamic characteristic and designing robust control

    由於獵雷艇作為動基座的存在和聲納基陣的框架結構特點，提出了以艇體坐標系為運動坐標系，運用變形的歐拉定理和坐標變換建立聲納基陣相對自身坐標系的旋轉運動方程的建模思想；將所建立的矢量形式的動力學模型展開整理，獲得了狀態矩陣形式的獵雷聲納基陣動力學方程，為系統動力學模型的實用化奠定了基礎。
  5. Then, according to characteristic of four kinds of butterfly operation in real number signal integer fft transform keeping modulus conjugating with symmetry, different lifting matrixes has been got and real number signal integer fft transform keeping modulus conjugating with symmetry can been achieved

    然後，根據實信號保持共軛對稱性的fft整數變換中的四類蝶形運算特點分別構造不同的提升矩陣，從而實現實信號保持共軛對稱性的fft整數變換。
  6. The conformal array is usually allocated on an aircraft, missile, or some other mobile platform conforming the shaped surface. its major advantage is the aerodynamic of aircraft is almost not changed

    共形陣列常安裝在飛行器或其他移動平臺載體表面，具有不改變飛行器表面空氣動力學性能，簡化天線安裝等優點。
  7. Compare to the normal rectangular waveguide, ridge waveguide has the character of broader bandwidth, smaller dimension, lower equivalent characteristic impedance, etc. because of these merits, it is used more and more widely, such as broadband ridge waveguide filter, broadband direct coupler, diplexer, frequency converter, phase shifter, ridge waveguide slot antenna array, and so on

    與普通矩形波導相比，脊波導具有工作頻帶寬、尺寸小、等效特性阻抗低等特點。由於脊波導本身的特點，使其得到了越來越多的應用，例如寬帶脊波導濾波器、寬帶定向耦合器、雙工器、變頻器、移相器、脊波導縫隙天線陣等等。
  8. According to solid - state physics, the physical mode of elastic wave stimulating the nucleation of martensitic transformation had been established, of which the elastic energy release as elastic wave to induce particle displacement and strengthen the condition required by martensitic transformation

    依據固體物理理論，建立了彈性應變能以彈性波的形式釋放，彈性波在奧氏體中傳播引起晶體點陣質粒位移，強化馬氏體相變形核的條件，促進馬氏體相變形核的物理模型。
  9. The major work is as follows : 1 ) based on dry hull modal analysis of flexure - torsion coupling vibration of unsymmetrical ship structures about longitudinal centerline, a transfer matrix method to calculate the dynamic characteristics is adopted after the parameters of structures are specified. taken both shear effect and warping deformations into account, the point and field transfer matrices are derived, and the influence on dynamic characteristics is computed according to different damaged positions and areas

    其主要內容如下： 1 ）通過薄壁梁理論求得結構參數后，採用遷移矩陣法，在考慮剪切效應、轉動慣量和翹曲影響下，推導出求解破損船體結構的動態特性公式系統的場遷移矩陣和點遷移矩陣，並著重分析了船體不同破損程度和翹曲變形對船體振動的動態特性的影響。
  10. The polygon morphing was investigated, and a morphing method was proposed, in which the polygon is deformed by interpolating the rotation angles and rotation matrices of their corresponding edge vectors

    摘要研究平面多邊形的變形問題，提出了一種通過插值邊向量間旋轉角度及旋轉矩陣的變形方法，較好地克服了頂點線性插值法引起的多邊形邊長變化不均勻的萎縮現象。
  11. After enlargement, the quality of vector graphics remains unchanged while the quality of bitmap graphics decreases

    向量圖形經放大后，其質素保持不變；點陣圖形經放大后，質素較差。
  12. The sequence is : non - classical ng supersaturated solid solution spinodal decomposition the variation in precipitation mechanism of 8 " phase in intermediate region is systematically investigated firstly, and it is found that with the increase of composition the precipitation characteristic transforms from that of metastable to instable region gradually

    首次發現l12有序疇之間首先形成較寬的重合位置點陣，隨時間延續，重合位置點陣逐漸向ll :結構轉變，在兩有序疇之間形成反相疇界，隨后，由於合金發生分解，反相疇界被有序一無序界面替代。
  13. Based on the initial parameters format of the distortion theory in this paper, the element stiffness matrix and the corresponding equivalent nodal force vector subjected to uniformly distributed load is developed

    在初參數格式的基礎上，本文又推導出考慮剪切變形的畸變分析的剛度矩陣及等效節點載荷列陣，獲得便於實際應用的畸變分析剛度法。
  14. Numerical simulation of foundation deformation under asymmetrical loading with the finite element method was performed by use of the cam - clay model and the ohta - sekiguchi model

    摘要用劍橋模型和關口太田模型對偏載作用下的地基變形進行了有限元數值模擬，並結合真三軸試驗成果比較分析了這2種模型柔度矩陣的特點。
  15. In this thesis a new numerical method - the finite volume method is developed to achieve the static and dynamic large - deflection response analysis for suspension cables. the finite - volume division scheme is first established along the length of the cable and the deformation of each volume is defined using the common engineering strain concept. based on this strain definition the strain energy of the cable is determined

    首先建立了懸索沿索長方向的有限體積離散格式，在變形后的構形上按工程方法求得了應變，並進一步得到了應變能和動能的計算式；再根據哈密頓原理導出了懸索大撓度振動的有限體積離散方程，推出了索的整體節點力向量、質量矩陣和切線剛度矩陣。
  16. Steel frame with welding joint easily occur brittle collapse because of having a low ductility at joints then ， a semi - rigid connected steel frame has large the energy absorption capacity which can resist dynamic loads and the using steel qualities of bracing system and joints are small so adopting a semi - rigid jointed steel frame is economical and stable but for semi - rigid connections are complex and variable ， in conventional analysis and design of steel structures ， it is usually assumed that the connections between columns and beams are either rigid or pinned the analysis of steel frames adopting the assumption can simplify the procedure of analysis and design ， but cannot precisely reflect structural practical circumstance and the errors of calculating results are large ， even ， get incorrect conclusions semi - rigid connection was referred to in chinese code for design of steel structures ( 2001 ， 10 ) ， however ， it isn ’ t specified how to apply semi - rigid joints in design in fact it cannot be carry out the purpose of the paper give a calculating method that accords practical engineering and easily put into effect worthwhile it is going to promote the development of semi - rigid jointed steel frame in design and heighten structural stability in the paper ， at first some commonly employed methods for the modeling of connection behavior are introduced richard abbott function modeling of connection is adopted for extended end plate bolted connection by the 34 test data comparing to regression analysis indicate richard - abbott function modeling of connection represents an excellent fit to test data then after a semi - rigid joint behavior can be modeled as a finite stiffness rotation spring ， base on rotation and displacement equation derive the element stiffness matrixes with semi - rigid connections where the effects ofj ointed flexibility geometric non - linearity and shear forces in the connection deformations have been considered in and fixed - end forces are modified finally, a program for calculating semi - rigid with incremental - iterative method has been

    本文的目的就是為半剛性連接鋼框架的設計提供一種既符合工程實際又簡便易行的計算方法，供規范使用過程的補充、延伸或參考；同時，也將促進半剛性連接鋼框架設計技術的發展，為提高結構安全性能、節省工程成本發揮應有的作用。本文首先介紹了常見的幾種應用較為廣泛的樑柱連接彎矩轉角關系模型，在分析比較的基礎上，選用richard ? abbott函數模型作為外伸端板連接彎矩轉角關系模型，通過對34個外伸端板連接的實驗數據與回歸分析得到的參數比較可知，經回歸分析得到的此模型參數與實驗數據符合較好。然後用彈簧表徵連接點的轉動剛度，根據梁的轉角位移方程推導出半剛性連接的剛度矩陣，在單元剛度矩陣中考慮了節點柔性、幾何非線性和剪切變形的影響，並對固端力進行了修正，最後用增量迭代法編制有限元程序進行計算和分析。
  17. The rayleigh - ritz method is used to lead to analytical expressions for the stiffness and mass matrices and load vector as well as their sensitivities, which uses the simple polynomials to define assumed displacement functions, geometry and construction of wing structures. excluding some selected terms from the displacement functions or using stiff springs at the specified locations imposes boundary conditions. the accuracy of calculated results is improved by including transverse shear effects and using multiple sets of ritz functions in the analysis

    它使用簡單多項式作為ritz基函數、定義翼面的幾何和結構參數，利用rayleigh - ritz方法導出翼面結構的剛度矩陣、質量矩陣和載荷向量及其靈敏度的解析表達式，通過排除位移函數中某些選定的項或在指定點使用約束彈簧施加各種邊界條件，考慮橫向剪切變形和使用多組ritz基函數改進分析的質量，使用等效蒙皮和等效夾芯技術提高計算效率。
  18. Research on off - line handwritten character recognition has great worth. the information of off - line handwritten character is very scarce ( only 2d pixel matrix ), and the handwritten characters have so many classes, complex strokes and shape distortion. all of above have become the obstacle of character recognition

    由於在脫機手寫體字元識別中，處理的僅是二維的字元點陣圖像，而且存在字元類別多、字形結構復雜、手寫字元的變形很大等問題，目前脫機手寫字元識別技術還很不成熟，仍處于實驗室研究階段。
  19. The identity matrix is used as the starting point for matrices that modify vertex values to create rotations, translations, and any other transformations that can be represented by a 4x4 matrix

    單位矩陣是特殊矩陣，將它應用於頂點時，頂點不發生改變。單位矩陣用作某些特定矩陣的起始點，這些特定矩陣修改頂點值以形成旋轉、平移以及任何其他4x4矩陣可表示的變換。
  20. On the base of brief introduction simple theory of genetic algorithms, we discuss the value of each genetic operator and the means of genetic operation. correct scheme of genetic algorithms is given out according to the special bolted sphere node. the genetic algorithms optimal program is compiled in the environment of matlab using the method of transferring parameters among the main function and the sub - function

    為此，首先分析了螺栓節點球的球心誤差，並通過矩陣變換理論給出計算球心誤差的公式，進一步討論了自動分度角度的計算方法；在簡介遺傳演算法的基本原理的基礎上，對各遺傳運算元的取值及遺傳操作方法進行了討論，針對典型的螺栓節點球零件給出了具體的遺傳演算法執行方案；通過matlab軟體編程環境進行程序的編制，利用主函數和子函數之間參數傳遞的方法實現了遺傳演算法優化，並且編制了圖形用戶界面，對優化結果採用圖文結合的形式輸出。
分享友人
分享到 Line

分享到臉書