alloy carbide 中文意思是什麼

alloy carbide 解釋
合金碳化物
  • alloy : n 1 合金。2 （合金中的）劣等金屬。3 （金銀的）成色，成份。4 〈比喻〉攙雜品。vt 1 合鑄，熔合（金屬...
  • carbide : n. 【化學】碳化物；碳化鈣；電石〈粗製CaC2〉。
  1. It is reported that hard alloy scrap is treated by electroosmosis and electrolysis together taking sulfuric acid as electrolyte in order to recover cobalt metal and tungsten carbide

    報道了以硫酸為電解質，同時用電溶法和電滲析法處理廢硬質合金、回收金屬鈷和碳化鎢的原理和方法。
  2. The strength and wear resistance of diamond drill bits for petroleum exploitation will be increased considerably when cast tungsten carbide is applied and adheres to the substrate firmly with cast tungsten carbide of 80 - 200mesh as the skelton and copper alloy as the soldering material in a process of non - pressure immersion

    石油鉆探行業用的金剛石鉆頭，用粒度為80 ? 200目的鑄造碳化鎢粉作骨架，採用無壓浸漬工藝，以銅合金作釬焊料，將鑄造碳化鎢與基體牢固結合，強度、耐磨性大大提高。
  3. The age hardening characteristic of as - cast cu20ni20mn and cu20ni35mn alloys and the interface characteristic between the alloy and cast tungsten carbide were studied, and on the basis of this study, composites of cu - ni - mn alloy reinforced with different volume fraction ( 0 - 45vol. % ) and different size ( 42 - 362 m ) of cast tungsten carbide particles were made by vacuum hot - pressing liquid sintering technology. pin on disk two body abrasion tests have been performed with different size of sic abrasive under different loads

    本文研究了鑄態cu20ni20mn和cu20ni35mn合金的時效硬化特性及其與鑄造碳化鎢的界面特性，並在此基礎上以不同尺寸（ 42 362 m ）的鑄造碳化鎢顆粒為增強體，採用真空熱壓液相燒結技術制備了不同顆粒含量（ 0 45vol . ）的鑄造碳化鎢顆粒增強cu - ni - mn合金基復合材料；以不同粒度的sic為磨料，在不同載荷條件下利用銷?盤磨損試驗機測試了復合材料的二體磨料磨損性能。
  4. Carbide alloy electric hammer drill

    硬質合金電錘鉆頭
  5. Cemented carbide alloy

    超硬合金
  6. Dlc can be deposited on various substrate with excellent adhesion such as steel, titanium alloy, aluminum alloy and cemented carbide, etc

    可以在各種鋼鐵、鈦合金、鋁合金、硬質合金等多種材料上沉積，結合力好。
  7. Technical guide for carbide phase analysis of low alloy heat resistant steels

    低合金耐熱鋼碳化物相分析技術導則
  8. The effect of heating on the carbide of h21 alloy

    21合金中碳化物的影響
  9. 9 grinding and cleaning of alloy steels, stainless steels and nonferrous metals shall be done only with tools that will not leave detrimental deposits on the base metal ; aluminum oxide or silicon carbide grinding wheels and austenitic stainless steel wire brushes shall be used

    合金鋼、不銹鋼和非鐵金屬的研磨、清理所用工具不能在母材金屬表面上留下有害殘留物，可為鋁氧化物或金砂鋼磨輪、奧氏體不銹鋼絲刷。
  10. Raw and auxiliary materials : iron powder, copper powder, tungsten powder, tungsten - carbide powder, stainless ( high - speed ) steel powder, magnetic material, ceramic material, nanophase material and other metal powders and alloy powders

    原輔材料類：鐵粉、銅粉、鎢粉、碳化鎢粉、不銹（高速）鋼粉、磁性材料、陶瓷材料和鈉米材料及其它元素金屬粉末及合金牌號的粉末等。
  11. And the corporation has the abilities of the equipment manufacture such as calium carbide furnace and iron alloy furnace and class pressure vessel manufacture and construction installation

    此外，還有硫磺液氨氧氣氮氣等。同時還具有電石爐及鐵合金爐設備製造類壓力容器製作建築安裝等能力。
  12. Tungsten carbide - copper alloy

    碳化鎢銅合金
  13. Cooling system with arc source not only reduces the calorie coming from evaporation of arc source, but also filter large - granule liquid drop. so it is widely used in plated aluminum alloy as well as in titanium nitride, titanium carbide, zirconium nitride, chromium nitride, titanium, nickel, chrome, copper, gold, and silver

    帶弧源降溫系統不但可以降低弧源蒸發過程中生成的熱量，而且可以過濾部分大顆粒的液滴，所以大范圍的用於鍍制鋁合金製品，廣泛適用於鍍制氮化鈦碳化鈦氮化鋯氮化鉻及鈦鎳鉻銅金銀等等。
  14. The equipments and the wall of diffusion pump are made of stainless steel with wearable performance and simple operation, fit for plating aluminum alloy products, such as the titanium nitrides, titanium carbide, zirconium nitrides, chromium nitride, titanium, nickel, chromium and copper etc

    設備和擴散泵泵壁採用不銹鋼結構，持久耐用，操作簡單，非常適用於鍍制鋁合金製品，可以鍍制氮化鈦碳化鈦氮化鋯氮化鉻及鈦鎳鉻銅等等。
  15. Remark : special material includes : gh3039, inconel600, monel alloy, gh44, 3yc52, cr50ni5 alloy, hastelloy, tantalum, titanium, nickel, molybdenum, fibre - ceramic, mosi2, corundum, al2o3, silicon carbide, momg

    注:特殊材質包括： gh3039 inconel600 monel合金gh44 3yc52 cr50ni50合金哈爾合金鉭鈦鎳鉬纖維陶瓷管二硅化鉬剛玉管高鉛管碳化硅鉬化鎂。
  16. The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high - speed milling of aluminum alloy

    摘要對硬質合金整體立銑刀高速銑削加工航空鋁合金時的刀具磨損形態及其磨損機理進行了觀察和分析。
  17. Secondly, choose the sample component, as different particle match of tungsten carbide and specifically heat treatment craftworks of solution and aging manufacture test piece, watch metallurgical structure of the test piece and do the tests of hardness and tension, at last do the abrasive wear test on the dynamic load abrasive wear test machine, analyze test datum, from the test data, conclusions are arrived that the hardnees of composite - alloy can be improved and wear - resistance be better by adding cr and other elements according to a given ratio

    本文對rp中速磨煤機耐磨件進行了運行與磨損情況分析，研究、提出了制備磨輥和盤瓦復合合金成分配比；並對製作的試件進行了固溶、時效等特定的熱處理工藝，觀察試件金相組織，進行機械強度試驗，最後做磨料磨損試驗，對磨損失效機理進行了深入的研究分析，對其耐磨性能與低合金鋼、高鉻鑄鐵進行了對比。
  18. Our solid carbide tools have been widely used in aviation, space, auto, mould etc. industries, can be applied to materials of cast iron, steel, stainless steel, alloy steel, harden steel, mould steel, tool steel, bearing steel, heat - resistant alloy, titanium alloy, nickel, plastic fiber, aluminum alloy, copper

    喜威一合金刀具目前已廣泛應用於航空，航天，汽車，模具等行業，用於加工灰鑄鐵，球墨鑄鐵，碳鋼， ，軸承鋼，模具鋼，合金鋼，工具鋼，淬火鋼，調質鋼，不銹鋼，玻璃鋼，鋁合金等軟金屬，鈦合金，鎳基高溫合金。
  19. And we also discovered there is no decreasing of the hardness on the surface of cr12 steel. it is due to dispersion harden by plentiful of alloy carbide and decreasing of residual austcnitc. these research work should provide some useful references for technicians in practice. at last, the program was also introduced

    但在高合金鋼cr12中發現硬度回落現象並不明顯，這是因為本身該鋼種的激光加工硬化帶硬度並不大，另外高合金含量產生的彌散強化以及殘余奧氏體的減少也是硬度回落小的一個原因。
  20. Green silicon carbide is suidtabe for processing hard alloy 、 metallic and non - metallic materials with hard and brittle feature such as copper 、 brass 、 aluminum 、 magnesium 、 jewel 、 optical glass 、 ceramics, etc

    綠碳化硅適宜磨削硬質合金和硬脆金屬及非金屬材料，如銅、黃銅、鋁和鎂等有色金屬和寶石，光學玻璃，陶瓷等非金屬材料。
分享友人
分享到 Line

分享到臉書