beam column program 中文意思是什麼

beam column program 解釋
行列程序
  • beam : n 1 梁，棟梁，桁條；（船的）橫梁。2 船幅；（動物、人的）體幅。3 （秤）桿，杠桿，（織機的）卷軸，...
  • column : n 1 【建築】圓柱；圓柱狀物〈如煙柱〉。2 【軍事】縱隊 （opp line）; 隊；（艦隊的）縱陣，縱列，艦列...
  • program : 按遺傳密碼工作
  1. From lots of models, this paper chooses seven models - model of mander, model of zhangxiuqin, model of sheikh, model of park, model of saatcioglu, model of fafitis and model of yuanjingen, which express the mechanics capability of confinement concrete perfectly and representatively. the paper modified some incorrect points of the models after studying them and some different hysteretic rules - hysteretic rules of park, hysteretic rules of blakeley, hysteretic rules of mander etc. were added to the models. on the base of above, the models were programmed and added in the program based on the column - beam element of the fiber model

    本文從大量的約束混凝土本構模型中篩選出具有代表性的七種模型，即mander模型、張秀琴模型、 sheikh模型、 park模型、 saatcioglu模型、 fafitis模型和袁錦根模型作為考察和研究對象，對部分模型局部明顯不當的地方進行了修改，然後在各模型中添加了不同的滯回規則，包括park滯回規則、 blakeley滯回規則、 mander滯回規則、張秀琴滯回規則、袁錦根滯回規則以及本文提出的滯回規則等，使其能適用於結構地震反應動力分析。
  2. Then an thorough computer modeling using finite element program with material, geometry and state triple - nonlinear taken into account is carried out on a series of influencing factors, such as comparison with npn - beam splice connection, comparison of varies designed theories, and the varying of fraction coefficient, diameter, grade, pretension and arrangement of bolts, thickness of web and flanges of beam and column, splicing location, axial loading on column, etc. lots of useful conclusions are drawn form computer modelling. finally, design and construction suggestions are given out. this study fills the black in the field of steel beam - to - column connection with cantilever beam high - strength bolted - splicing at both home and abroad

    然後，本文在考慮材料、幾何和狀態三重非線性的基礎上，對該連接形式進行了全面的計算機模擬，主要考慮了帶懸臂梁段全螺栓拼接的樑柱連接節點與無拼接的樑柱連接及翼緣對接焊接腹板拼接的連接節點的對比，各種設計方法之間的對比，以及翼緣拼接和腹板拼接的螺栓間距、直徑和數量，拼接點與梁端之間的距離，梁和柱的翼緣、腹板厚度，柱的軸力，接觸面的摩擦系數，翼緣和腹板拼接板的厚度等因素的影響。
  3. Considering the joint core deformation effect, the existing cantilever program was assembled with the slip deformation model of longitudinal reinforcement passing through joint and the shear deformation model of joint to obtain the program for simulation of hysteretic characteristics of beam - column subassemblage

    本文考慮節點區變形的影響，為原有程序組裝了節點區貫穿節點梁筋的滑移變形模型和節點剪切變形模型，得到樑柱組合體在低周交變加載下的梁端荷載-位移滯回規律模擬程序。
  4. The beam end displacement due to beam and column deformation may be calculated by existing cantilever program and then converted by geometric relation

    梁段、柱段變形引起的梁外端撓度可利用已有懸臂柱低周交變加載模擬程序計算，再通過幾何關系換算得到。
  5. The process include three aspects : ( 1 ) from " story shear model ", the story lateral stiffness is deduced, and compared with the rectangular column frame structure. ( 2 ) from " space beam element model ", element stiffness matrix is deduced, and compared with the rectangular column element. ( 3 ) based on the element stifmess matrix, the program of internal force and displacement analysis is workouted

    本文結合異形截面桿的受力性能，按「層模型」 ，對其抗側移剛度進行了理論研究；按「桿系模型」 ，分析了異形截面桿的單元剛度矩陣，並在此基礎上，編制了異形柱結構內力分析的有限元程序。
  6. Considering the behaviors of unbonded prestressed concrete beams and steel reinforced concrete columns, a kind of nonconforming beam - column element was constructed and the analysis precision was improved. loading and reloading paths were introduced into the constitutive relationship of concrete. it is helpful to the analysis program to trace the full - range mechanical behavior of structures including the descending part and the hysterisis characteristic under cyclic loading

    考慮無粘結預應力混凝土梁、型鋼混凝土柱等結構構件的受力特點，構造非協調樑柱單元，提高了分析精度；混凝土的本構關系中，引入卸載路徑和再加載路徑，使得分析程序可以追蹤包括下降段在內的結構全過程力學行為，以及反復荷載下結構的滯回特性。
  7. Then, suggestions about the design of the beam - to - column web moment connections are put forward. in conclusion, the finite - element model and the program adopted in this paper can well simulate the response of beam - to - column web moment connections under monotonous load

    本文所建立的有限元模型考慮問題全面、精度較高，它與所採用的有限元程序能夠很好地模擬、研究在單向荷載作用下樑柱腹板剛性連接的反應。
  8. The calculating formula of yield surface for special - shaped column and the correspondent program are given in this paper. thereafter, the position and order about the beam column plastic hinge are drawn ; it is considered that the r. c. frame structure with special - shaped column reveals the typical characteristic of " strong column and weak beam "

    推導了異形柱屈服面計算公式；選取了24條地震波，以場地類別作為劃分依據，編制了相應的程序，計算並繪制了樑柱塑性鉸出鉸位置和順序圖，認為鋼筋混凝土異形柱框架結構表現出典型的「強柱弱梁」特性。
  9. This paper firstly compares the provisions about torsion effect and anti - torsion design in several codes ( the old and new chinese code for seismic, and some other countries " codes ). then, according to the code for seismic design of buildings ( gb50011 - 2001 ) and the code for concrete structure design ( gb50010 - 2002 ), the paper designs two multi - storied irregular concrete spatial frames, which respectively situated at the area of fortification intensity 8 and 9. subsequently, using the program based on the column - beam element of fiber model, input several ground motion records, which are selected according to the demand of code, to carry the structures " three - dimensional nonlinear analysis in two perpendicular directions at the same time

    本文對比了我國新、舊建築抗震設計規范（ gb50011 - 2001 、 gbj11 89 ）以及國外設計規范（或指南）中關于結構扭轉效應與抗扭設計的相關規定；按照新建築抗震設計規范和混凝土結構設計規范（ gb50010 2002 ） ，設計了設防烈度分別為8度和9度的兩個多層鋼筋混凝土不規則空間框架結構，利用纖維模型樑柱單元的三維非線性動力分析程序，根據新抗震設計規范的要求，在設防地震作用和罕遇地震作用水準下選擇適當的地震波作為輸入，對結構進行了雙向地震作用下的三維非線性動力反應分析。
  10. The influence of skeleton curve and hysteretic curve on the simulate curves are analyzed. the paper chooses seven representatively models from lots of confinement models, and some different hysteretic rules are added to them. by dint of the program based on the column - beam element of the fiber model, material bank of the program established

    利用此程序作為有力工具，以大量低周反復荷載下壓彎試件的試驗結果為標準，通過對試驗結果的計算機模擬分析，比較了各模型中骨架曲線及滯回規則的模擬效果，分析了材料應力應變曲線與構件力位移模擬曲線間的聯系以及影響這一聯系的因素。
  11. 4. the program of the design and calculation of the pre - stressed anchor supporting structure with beam and column is written with the language visual basic

    4 、採用visualbasic語言編制了預應力肋樑柱錨桿支擋結構設計計算程序。
  12. According to unified theory and hysteretic model based on section, the hysteretic models of steel beam, reinforced concrete beam and concrete filled steel tubular ( cfst ) structure column were chosen respectively, then the nonlinear structural analysis program called idarc is employed to determine the skeleton curve of the concrete filled steel tubular frame structure

    摘要以鋼管混凝土統一理論為基礎，從截面層次的恢復力模型出發，鋼管混凝土柱構件選用三線型彎矩曲率滯回模型；鋼梁採用雙線型彎矩轉角滯回模型；鋼筋混凝土梁選用三線型彎矩轉角滯回模型。
  13. The earthquake responses of the asymmetric - plan structure are researched and the main factors that influencing the structure ' s response are established. the influences of the earthquake type and the earthquake input in two directions are also researched. the effectiveness of regulation for the irregular rc frames in the code for the seismic design ( gb50011 - 2001 ) is discussed using the flexibility - based fiber - models beam - column elements in the 3d nonlinear analysis program

    本文結合國家自然科學基金資助項目「結構非線性地震扭轉作用和扭轉效應的研究」 （項目批準號： 59978055 ） ，對平面不規則結構的地震反應規律進行了深入研究，明確了影響平面不規則結構地震反應的主要結構參數，研究了不同地震動類型和雙向水平地震輸入對結構扭作用和扭轉效應的影響；採用基於有限元柔度法的纖維模型樑柱單元，建立鋼筋混凝土框架結構三維非彈性地震反應動力分析程序，對依據我國建築抗震設計規范（ gb50011 - 2001 ）設計的不規則結構進行地震反應模擬分析，討論了現行設計方法的有效性。
  14. In this paper, experiment study, theoretic analysis, fem program are combined, t - type connections of beam - to - column are carried out systems analysis and research

    本文採用試驗研究、理論分析、有限元程序分析相結合的方法，對鋼框架樑柱t型節點連接的形式進行了系統的分析與研究。
  15. If we know the relevant parameters and soil parameters, using the program can obtain the internal forces of beam - column, the diameters and length of anchors

    已知相關參數，利用該程序可以直接得到肋樑柱截面設計內力、配筋以及錨桿的直徑與長度。
分享友人
分享到 Line

分享到臉書