built-in sensor 中文意思是什麼

built-in sensor 解釋
內裝式傳感器
  • built : adj. 1. 建造成的，組合的，拼成的。2. 〈俚語〉體型美的。n. 〈俚語〉體型美，肉體美。
  • in : adv 1 朝里，向內，在內。 A coat with a furry side in有皮裡子的外衣。 Come in please 請進來。 The ...
  • sensor : n. 1. ＝sensory （名詞）. 2. 【自動化】感受器；傳感器；靈敏元件，控制儀板上顯示溫度、輻射量等變動的裝置。
  1. To verify the effectiveness of the proposed hybrid fnn, this thesis addressed the estimation problem for the frozen point of light cyclic oil in a fluidized catalytic cracking unit ( fccu ) in a refinery. based on the sample data collected from the industrial unit, we built a soft sensor model by using an above hybrid fnn

    最後，針對某煉油廠催化裂化裝置主分餾塔輕柴油凝固點的軟測量估計問題，本文基於工業現場所採集的樣本數據，建立了混合結構神經網路模型，並討論該模型的在線自學習問題，同時與多層前向bp網路、徑向基函數rbf網路模型進行了比較。
  2. The contacting measurement method with a double probe is put forward after the detailed analysis of the state - of - the - art measuring methods of the thickness of wall. firstly, the theory - profile generatrix is built, and then the movement curve of the track of joint center is constructed, which aims at making the joint center move along the movement curve and keep the fixed sensor touching the wall. the measuring sensor examines the line in its normal direction of the interior wall all the time, the data from the sensor is the thickness value of the wall

    論文通過分析國內外變曲率回轉體壁厚測量的現狀，提出了雙測頭接觸式測量方案:通過構造理論輪廓母線，建立鉸鏈中心的運動曲線，使鉸鏈中心始終沿運動曲線運動，以保證固定觸頭與傳感器測頭的連線始終在內壁法線方向上，從而傳感器測頭所得的數值即為壁厚值，該方案經模擬測試實驗取得了預期效果。
  3. The selected pressure sensor in wide plus k1 series universal pressure transmitter, is a fully welding stainless steel structure which built - in solid pressure sensing chip with stainless steel isolation membrane

    Wideplus - k1系列通用壓力變送器選用的壓力傳感器，是一個內裝固態壓力敏感晶元的帶不銹鋼隔離膜片的全焊接不銹鋼體。
  4. To set up reasonable designing and manufacturing techniques and accurate calibration system and to speed up forming the native pvdf pressure sensors is the direction of this project. first, based on the piezoelectric theorem, the theoretic support of pvdf pressure sensors is deduced. according to purposes of practical projects, special purpose sensor configurations are designed and the corresponding calibration system based on shpb ( split hopkinson pressure bar ) technique is built in succession

    本文從壓電材料的一般壓電控制方程開始，導出了pvdf壓電薄膜測壓技術的相關論據；根據測試目的以及被測結構的特點，設計了多種夾心式的傳感器構造形式；摸索出了一套基於國產pvdf壓電薄膜製作壓力計的加工、安裝工藝；建立了一套基於系統集成技術的多點pvdf壓力測試的數據採集、處理系統；建立了一套基於shpb技術、適用於實際工程應力范圍的pvdf壓力計的動態標定方法，並對兩種厚度的國產pvdf壓電薄膜進行了標定。
  5. 22 lo j c, daly j c, nicolaidis m. a strongly code disjoint built - in current sensor for strongly fault secure static cmos realizations

    一個理想的容錯vlsi電路應該具有低的空間和時間開銷低延遲，但具有高的檢錯和糾錯能力。
  6. In this part the signal from the infrared sensor was amplified by common collector amplifier, and the demodulator was built by filter. in which the signal got demodulated. because we just need the frequency of the signal, filter may achieved

    通過信號通路，傳感器生成的調幅波信號轉變為與脈搏頻率相同的方波。先由運算放大器接共集電極電路完成信號放大，通過濾波得到脈搏信號的頻率，從而用濾波器電路完成了解調功能。
  7. Furthermore, the online self - learning problem of soft sensor model was also discussed. finally, the built model was used in an industrial fccu

    在此基礎上，將該混合模型應用於實際工業催化裂化裝置主分餾塔輕柴油凝固點的在線估計問題。
  8. It is composed of magnetic pulse sensor and control components, and is a built - in part inside distributor. it detects engine cranking position signal and cylinder signal via sensor, followed by treatment by control unit, thus controlling the on off of the current of control ignition coil to achieve the purpose of ignition. it has a function of auto closing regulation

    該型產品是為微車無觸點點火系統而研發的，它由磁脈沖傳感器和控制組件構成，內置於分電器內，通過傳感器檢測發動機曲軸位置信號汽缸信號，然後經控制組件處理，控制點火線圈中電流的通斷，從而達到點火目的，具有閉合角自動調整等功能。
  9. It is composed of magnetic pulse sensor and control components, and is a built - in part inside distributor. it detects engine cranking position signal and cylinder signal via sensor, followed by treatment by control unit, thus controlling the onoff of the current of control ignition coil to achieve the purpose of ignition. it has a function of auto closing regulation

    該型產品是為微車無觸點點火系統而研發的，它由磁脈沖傳感器和控制組件構成，內置於分電器內，通過傳感器檢測發動機曲軸位置信號、汽缸信號，然後經控制組件處理，控制點火線圈中電流的通斷，從而達到點火目的，具有閉合角自動調整等功能。
  10. Since our founding in 1906, yamatake has built on its core of measure - ment and control technologies to maintain its position at the forefront of japan s auto - mation industry. over our long history, we have built a sterl - ing reputation for providing optimum solutions in industrial automation, factory automation and building automation. sya was approved as chinese distributor of yamatake in 1999, and began to cooperate in regulator, recorder transmitter, sensor, actuator, combustion control, air conditioning control, anti - exploding switch, and other relative equipment

    上海鷹琪自動化成套設備有限公司於1999年取得山武公司的中國區代理權，並開始了與山武公司在調節器記錄儀指示儀轉換器傳感器執行器燃燒安全控制器空調控制器防爆限位開關系統相關設備等產品領域的合作，通過不斷努力，取得了相當不錯的業績，尤其調節器執行器燃燒安全控制器及防爆限位開關等產品方面有獨道的技術服務經驗，深受廣大用戶好評。
  11. In this dissertation, a key point of the study is to build up a mathematical model of the character impedance the swr sensor. the structure of four equal - length probes can be viewed as a special form of coaxial hansnussion line. combining the character impedance of coaxial and the para1lel transmission line, the character impedance model of probe with eqtlaling length was built up by utilizing mathemaical theory of approach

    本文將四針等長式結構的土壤水分探頭看成是同軸傳輸線的特殊形式，從標準傳輸線特徵阻抗入手，結合平行傳輸線，運用數學上常用的夾逼定理，得出了四針等長結構的土壤水分探頭特徵阻抗數學模型，由此提出swr型土壤水分四針不等長探頭的特徵阻抗數學模型。
  12. Product introduction a5 is a standalone fingerprint t a system. it is built in linux operation system and dp uru4000 sensor. the identification speed is fast and ffr and far are low

    產品介紹a5專業型指紋考勤機採用2005版混合式引擎識別演算法，可儲存1500枚指紋， 50000條紀錄，採用u . are . u指紋儀採集指紋，指紋識別質量明顯提升。
  13. This paper presents a robot autonomous calibration approach, the kinematics equations are built through the probe fixed in the end - effector contacting the constraint planes in the workspace, the robot internal sensor measurements are recorded for kinematics calibration while the tip - point of the probe is in contact with the constraint planes, the locations of the constraint planes are not necessarily known exactly

    摘要介紹一種機器人自標定方法，通過固定於機器人末端執行器上的探針與工作空間中的約束平面接觸，建立運動學約束方程，利用機器人內部傳感器讀數來辯識機器人運動學參數，約束平面的位置無需準確知道。
  14. Design of a novel all - cmos built - in temperature sensor

    片上溫度傳感器設計
  15. The wireless sensor networks ( wsns ) are the hotspot research of current sensor technology. much attention are focused in this paper on the design of the hardware architecture for wireless sensor network node, the development of the sensor node ‘ s hardware and software and its structural health monitoring application system. a structural health monitoring system based on the developed node, named as cute1, was built by the pattern matching method

    無線傳感網路是當前國內外傳感器技術領域的熱點研究課題，本文著重研究了針對無線傳感網路節點的軟硬體設計，成功實現了智能無線傳感網路節點「 cute1 」的設計，並運用該無線傳感節點建立了針對結構健康監測的應用系統，利用模式匹配的方法實現了基於無線傳感網路的結構緊固件失效的實時監測。
  16. Benefits 2005 version of algorithms with dependability and accuracy, identification speed obviously improved, it can manage 3000 fingerprint templates within 2 sec. built in embedded standalone module zem200 with strong american intel 32 bit x - scale cpu. adopt u. are. u sensor, improving fingerprint identification support 360 - degree rotation identification, easy to use and reliable

    特點： 2005版混合式引擎識別演算法在系統可靠性準確性識別速度都有明顯提高，可以在2秒內處理3000枚好壞指紋均勻分佈的指紋內置強大美國intel32位嵌入式指紋識別模塊zem200 ，很容易集成到各種系統中基於主板的嵌入開發系統edk是一個多功能的通用嵌入式linux脫機指紋產品開發平臺，能夠滿足大多數基於指紋的嵌入式市場需求。
  17. The background of rapidly developed uhsm ( ultra high speed machining ) technology is introduced and the key function of the uhs ( ultra high speed ) motorized spindle to uhsm is discussed in the thesis. after analyzing international technology status and trend of the uhs motorized spindle study, we research the core technologies related to the uhs motorized spindle in detail, such as optimized design of the motorized spindle structure, high speed bearing technologies, oil - gas lubication technologies, precision machining and assembly technologies, design and manufacture technologies of the built - in frameless motor etc. then the digital simulation of the motorized spindle sensor - less vector control system is studied thoroughly

    本文從超高速加工技術飛速發展的背景出發，討論了超高速電主軸對超高速加工技術發展的重要作用和意義；分析了超高速電主軸研究的國內外現狀及發展趨勢；詳細論述了超高速電主軸的關鍵技術，包括電主軸結構優化設計、高速軸承技術、油氣潤滑技術、精密加工與精密裝配技術以及內裝式電機設計製造技術等，並深入研究了超高速電主軸無速度傳感器矢量控制系統的數字模擬技術。
  18. This thesis can be divided into ten chapters, the ieee1451 networked smart sensor module is introduced at length, the development of network capable application processor based on dsp platform and a series of smart transducer modules are discussed in detail, the application layer communication methods of networked smart sensor and correction, compensation methods and correction engine are deep researched, the key technologies of support software for networked smart sensor are presented, at last, multi - distributed measurement & control system modules are built, practices show that the standard networked smart sensor developed are available and the ieee1451 standard is preponderant

    論文在標準校正模型基礎上對傳感器校正補償方法進行了研究，包括數據插值、最小二乘以及神經網路方法。在方法研究的基礎上基於matlab和vc + +環境開發了傳感器模型建立軟體，能夠生成ieee1451標準的校正電子數據表格。在研製的網路化智能傳感器基礎上，構建了多個基於以太網的分散式測控系統模型，並且開發了系列支撐演示軟體。
  19. In chapter four, distributed fiber bragg grating sensor network is designed, which adopted wavelength - encoded measuring schemes, built up linear array fiber optic sensor network with application of wavelength division multiplexing technology and embedded inside smart layer

    第四章設計了分散式光纖光柵應變傳感網路，採用波長編碼的絕對測量方案，用運波分復用技術組成線性陣列型光纖傳感層，並將其集成到智能夾層中。
  20. Built - in sensor

    內裝式傳感器
分享友人
分享到 Line

分享到臉書