detail transfer 中文意思是什麼

detail transfer 解釋
細部轉印
  • detail : n 1 〈pl 〉 詳細；詳情。2 細目；瑣事，小事。3 【軍事】支隊；〈英國〉行動指令。4 詳圖，明細圖。5 ...
  • transfer : n 1 移轉，轉送；調職；調任[轉學]證書；變換。2 （財產；權利等的）轉讓，讓與（證書），移轉，授受；...
  1. This paper researches diathermancy and fluidity of condenser, evaporator, compressor, and capillary in detail. maths models of condenser, evaporator, compressor, and capillary are established and model predigesting and modifying methods are done methods are given in this paper, which can transfer the practical system into the simulating system. in the basis of refrigerating system character, components models are modified in the system administrative levels

    本文詳細研究了蒸發器、冷凝器、壓縮機和毛細管的傳熱特性和流動特性，建立和發展了蒸發器、冷凝器、壓縮機和毛細管數學模型，並進行了相應的模型簡化和修正方法研究，建立了從實際系統到模擬系統的轉換方法；本文針對各製冷系統的特點，在系統層次上進行了部件模型的修正研究，建立了相應的修正模型和演算法。
  2. Since twentieth century scholars all of the world have studied on the indoor thermal environment, this paper first summarizes in detail on thermal environment and thermal comfort, air - conditioning mode and energy conservation, thermal environment judge, simulation and emulation, environment physiology, preventive medicine, hygienics and epidemiology, garment etc of native and foreign countries ’ research status in quo. it introduces the mature achievement of human and environment heat transfer model, thermal environment evaluating indicators and comfort influence factors, standards of thermal comfort of the indoor environment, and some of which are researched in defence such as the thermal environment of aviation module or warship cabin of the psychologic and physiological influence on soldiers. so this paper still discusses human psychologic and physiological mechanics in thermal environment

    自20世紀以來，各國的學者紛紛對室內熱環境進行了研究，本文首先較為詳細地綜述了國內外熱環境與熱舒適，空調方式和節能，評判、模擬與模擬，環境生理學、預防醫學、衛生學、流行病學，服裝學等方面的研究現狀，介紹了人體與環境傳熱模型、熱環境評價指標、影響熱舒適的因素、室內環境熱舒適的標準等方面比較成熟的研究成果，研究中不乏有用於國防研究的特定熱環境（如航空艙、軍艦艙）對士兵生理和心理方面的影響，因此本文還闡述了有關在熱環境下人體生理和心理反應的機理。
  3. After analysising the theory and characteristics of the corba and mobile agent technologies, the paper brings forward firstly a kind of mobile agent architecture - coma, and gives the solution to coma ' s asynchronous transfer, concurrent control, naming, location and intelligence mechanism in detail. furthermore, aiming at making up the flaws of the application servers based on corba in distributed group environment and solving the problem of object ' s remotion on the corba server, the paper proposes a kind of corba architecture based on mobile agent - maorb, discusses naming and transparent transfer of mobile agent in a maorb system in detail, and gives a reasonable improvement method

    本文在分析了corba和移動agent這兩種分散式技術的運行原理及其特點之後，首先提出一種應用於協同環境下的移動agent體系結構coma ，並詳細給出了coma的異步遷移、並發控制、命名和尋址，智能化機制這幾個關鍵技術的解決方法。進而，為了彌補單純的利用corba技術來構建分散式集群環境中應用服務器的不足，解決corba服務端對象的可移動性問題，本文又提出了一種基於coma的corba體系結構maorb ，詳細討論了maorb系統中移動agent的命名和透明遷移以及corba和coma的結合度問題，並給出了合理的解決方案。
  4. It can provide many functions : the conversion between transfer formats, the conversion between communication protocols, the conversion between analog signals and digital signals, the conversion of control commands, real time audio code / decode, ip call control, control of rtp / rtcp, call detail logs, accounting and some of gatekeeper ' s functions such as address tansfer / search.

    它提供以下功能：傳輸格式間的轉換，通信規程間的轉換，音頻、數據格式轉換，呼叫控制信令的轉換，對pstn的呼叫控制功能， pstn電路交換功能，實時語音處理語音壓縮功能， ip網路呼叫控制功能，對實時對話協議rtp rtcp的控制功能，呼叫日誌，計費功能，還包括關守的地址翻譯搜索等功能。
  5. Detail view of light sensors at bottom of transfer line

    傳輸管底端之光線感測器詳圖。
  6. The taylor scheduler was integrated with the existing fountain set erp system. now when sales creates new orders in the erp, the data will transfer to taylor scheduler, be scheduled accurately and returned to the erp with the detail for every operation step being scheduled in the plant

    所以我們除了為福田提供了一個統一的排單平臺外，還把排單系統跟福田現有的erp系統結合，營業員一開單，訂單資料會自動傳送到排單系統上進行計算。
  7. This paper has introduced the design of the instruction mechanical system, servo control system and image collection and processing system of the automatic tester for dial gauges in detail. it is illuminated that the step motor with the card of i / o and the step motor actuator is driven by computer. the step motor drives the surveying rod of automatic tester for dial gauges through the transfer machinery and realizes micro - displacement of the surveying rod

    本文詳細介紹了指示表自動檢定儀的機械繫統、伺服控制系統、圖像採集與處理系統的設計，闡明系統是在計算機的控制下，由計算擬通過i o卡、步進電機驅動器，驅動步進電動機，由步進電動機通過傳動機構推動被檢指示表的測桿移動，從而實現測桿的微量進給。
  8. Detail of transfer line valve configuration

    傳輸管系統閥門配置詳圖。
  9. Basis ( system of accounting of finance affairs of company of flow of goods " regulation, operating expenses but detail is : incidental expenses of welfare funds of management personnel salary, management personnel, traffic expense, carry, pack arrange cost of cost, insurance premium, exhibition, poor travelling expenses, retention fee, examine cost of commission of accumulative total of poundage of loss of cost, transfer fee, goods, service, import and export merchandise, advertisement

    根據（商品流通企業財務會計制度》規定，營業費用可明細為：經營人員工資、經營人員福利費、運輸費、運雜費、包裝整理費、保險費、展覽費、差旅費、保管費、檢驗費、中轉費、商品損耗、勞務手續費、進出口商品累計傭金、廣告費。
  10. Then the whole scheme design and research of the system are given. and then based on the deep comparisons among the variable switch indicators, the reliability of communication between the main communicating machines and data transfer is studied, and the detail method for realization is presented too. at last, the system design is proven to be fully feasible by the actual development and simulation experiment, and the prospective aim is achieved in the session of connection and actual emulation experiments

    論文中首先詳細介紹了系統研製的目的、組成、完成的功能，其次給出了系統的整體方案設計和研究思路，再次著重對道岔表示器的多種制式進行了深入的研究和比較，並在此基礎上對主通信機及數據通信的可靠性進行了研究和設計，給出了具體的實現方法；最後進行了實際的製作，並通過試驗證明本設計是完全可行的，在系統聯機試驗和現場模擬試驗階段達到了預期的設計目的。
  11. The thesis describes the conception of the object - oriented modeling and integrated simulaton enviroment, and discusses the below topics : ( 1 ) describe the reasonable structure of the modern fighter simulation system, and design the data transfer interface. ( 2 ) discuss the modeling method of the key subsystem of future fighter system especially the aerodynamics and the control system in detail. ( 3 ) construct the 3d model of the aircraft and scene, and verify the graphic simulation technique based on pc

    本文詳細討論了面向對象建模方法以及一體化模擬環境的基本概念框架及基本結構並在此基礎上提出了合理的現代戰斗機模擬系統結構，設計了模擬系統的數據傳遞介面；詳細討論了現代戰斗機模擬系統關鍵子系統? ?飛機本體、飛行控制系統建模方法；建立了用於研究的飛機以及視景的三維顯示平臺；並在此基礎上實現了實驗性的基於pc的現代戰斗機圖形模擬平臺，對模擬模型有效性確認和驗證工作做了初步的探討，研究比較了傳統飛行動力學和運動學方程和四元數法在飛行模擬中的效果。
  12. The design model of seawater desalination with the tvc falling - film evaporation process was deduced. the transfer coefficient of falling - film evaporation process was analyzed in detail. and the effect of the parameter change of process steam to the operation of the device was calculated and discussed

    本文主要開展tvc壓縮蒸餾海水淡化技術研究，建立了tvc壓縮噴淋降膜蒸餾海水淡化裝置的設計模型，對降膜蒸發過程的傳熱系數進行了詳細的分析，並對工作蒸汽參數變化對裝置運行的影響進行了分析計算。
  13. According to the pseudo static tests on two specimens of transfer floor from inclined column to framed short - leg shear wall, which are subjected to the vertical loads and the horizontal cyclic loads, in this paper the stress distributions, final failure model of the specimens, paths of the load transfer and the mechanical behaviors of the transfer beam are studied in detail, the ductility and energy dissipation of the specimens are also specially studied

    摘要通過對兩榀框支短肢剪力墻斜柱轉換結構在豎向荷載及水平低周反復荷載共同作用下的擬靜力試驗，分析了試件的應力分佈狀態、破壞形態、荷載傳遞規律以及轉換梁的受力性能和試件的抗震性能。
  14. Then the designs of modules mentioned in the scheme are discussed in detail. the main contents of the dissertation include : 1. to satisfy the need of a16 / d16 single - cycle and block data transfer capability, the method of the state machine and diagram are adopted. the arbiter, requester, interrupter, interrupter handler modules are also implemented by use of the state machine. these modules are verified theoretically by using timing simulation

    本文具體工作如下: 1 .用狀態機和電路圖的方式實現了vme總線a16 / d16單周期數據讀寫和塊傳輸功能;並用狀態機設計了vme總線請求器，總線仲裁器，中斷器和中斷處理器等，並進行了時序模擬。
  15. This paper designs a measurement system and measures the main properties of power line practically. the characteristics of power line are analyzed in detail, and a power line channel model is presented which consists of the parametric transfer function model and the simulating model of background noise, narrow noise and impulse noise. simultaneously the simulating method on the computer is presented

    本文設計了一個測量系統對實際電力線通道的主要特性進行了測量，詳細分析了電力線的信號傳輸特性和噪聲特性，給出了一個實用的室內電力線通道模型，包括參數化的傳輸函數模型以及背景噪聲、窄帶噪聲和脈沖噪聲的近似模型，並給出了計算機模擬實現方法。
  16. Simultaneity, various single fiber strength tests ( sft ) and the single fiber fragmentation techniques were discussed, and the influence of fiber surface treatment on the single fiber strength and the interface load - transfer were discussed in detail. the two parameters weibull statistic theory was used to evaluate the scattering of the tensile strength test results of three types of single fibers with different surface treatments. the following conclusions can be drawn based on the analysis of the results

    同時，文中詳細討論了單纖維強度測試實驗（ sft ）和單纖維復合材料斷裂實驗（ sfc ） ，重點討論了纖維表面處理對單纖維拉伸強度和界面載荷傳遞能力的影響；採用兩參數weibull統計理論對經過三種不同表面處理的單纖維拉伸強度的測試結果的分散性進行了評價，獲得了理想的實驗結果；分析實驗結果可得到如下結論， sft實驗與sfc實驗獲得的界面剪切強度吻合良好；經過表面處理的玻璃纖維的界面粘結情況較未經處理的玻璃纖維好；經過表面處理的玻璃纖維的界面粘結強度和單纖維拉伸強度均高於未經表面處理的玻璃纖維。
  17. Further, the paper introduce the transfer of matlabs. l by vb and the management of the expert rules database and the fault diagnosis of the pre - decomposing rotary kiln system. thirdly, the author analyzes and researches this system in detail

    此外，本文還對vb調用matlab5 . 1中神經網路工具箱的方法，應用ado控制項實現樣本數據庫、專家規則庫的管理，以及根據水泥預分解窯系統的特點實現的故障診斷功能進行了介紹。
  18. Abstract : design principle and mechanical feature of transfer storage mechanism in transmission shaft automatic welding assembly line has been introduced, some questions in the design have been mentioned and also analysed in detail, and applied effect has been illustrated

    文摘:介紹了傳動軸自動焊接裝配生產線中輸送貯料機構的設計原理、機構特點，指出了設計中應注意的有關問題並進行了詳細分析，說明了應用效果。
  19. The cryogenic performance of scq and ssm superconducting magnets are investigated both at steady operation state and at unsteady state in detail, including flow and heat transfer characteristics of cooling medium, and electromagnetic, mechanical characteristics of magnets

    本文以bepc中關鍵部件scq 、 ssm超導磁體為主要研究對象，研究了超導磁體在低溫下的穩態與非穩態工作特性中的若干問題，包括冷卻介質的流動特性、傳熱機理，磁體的冷卻結構、電磁與機械性能等。
  20. Self - oscillation initiated by helmholtz resonance chamber with different configuration under different waterpower parameters is introduced in the paper. the influence on the heat transfer enhancement of the heat exchanger by applying resonance chamber is discussed in detail

    本文介紹了不同結構的helmholtz共振腔在不同的水力參數下產生的自激振蕩情況，以及將自激振蕩應用於換熱器上對強化換熱的影響。
分享友人
分享到 Line

分享到臉書