electro structure 中文意思是什麼
electro structure
解釋
電子結構-
It holds that the complicated mechanical driving system will be replaced by the advanced electronic system, the mechanical structure be futher improved and a new type of electro - mechanic combing machine characteristics of high performance, high efficiency and high automation be soon come into the world
認為現行復雜的機械傳動方式將會被先進的電子傳動替代，機械結構將得到改進，近年內將出現高性能、高效率，機電一體化和自動化程度更高的新型精梳機。 -
In this dissertation, firstly, preparation, structure and optical properties of templates - - anodic alumina membranes ( abbreviated as aam ) with nano - pore arrays were studied intensively. then electro - deposition preparation and mechanism of cadmium selenide ( cdse ) thin films were investigated. at last, cdse nano - wire arrays in aam with nano - pore arrays were prepared and characterized by template - electro - deposition method which is one kind of up - to - date way and has merits of both template technique and electro - deposition method
本論文首先對模板? ?納米孔陣列陽極氧化鋁膜（ aam ）的制備、結構和光學性質進行了比較詳細的研究，然後研究了cdse薄膜的電沉積法制備及沉積機理，最後結合模板技術和電沉積法各自的特點，首次以納米孔陣列aam為模板，用模板-電沉積新方法制備出cdse納米線陣列，並對其進行了較為詳細的表徵。 -
Study on structure and property of the - co wc nanoparticle composite coating prepared by electro - brush plating
納米顆粒復合電刷鍍層的組織性能分析 -
Based on optical waveguide theory and electro - optic effect, the structure of the intensity modulator, fabrication technique, and measurement technology are studied intensively
研究內容包括光波導理論、電光效應等基本理論研究，強度調制器結構的設計、工藝技術研究與設計、測試技術研究。 -
Improve the structure type for 127m2 electro - duster of sintering machine
2電除塵器結構型式改進 -
For the sake of realizing compressive ignition of single fueled natural gas and aiming at the characteristics of high spontaneous combustion temperature of natural gas, the separated combustion chamber provided with low heat radiation structure was designed, meanwhile the heating device for the intake pipe air and the ceramic electro - thermal plug heating device inside the separation chamber were set up
摘要為實現單一燃料天然氣的壓燃著火，針對天然氣自燃溫度高的特點，設計了具有低散熱結構的分隔式燃燒室，同時設置了進氣管空氣加熱裝置和分隔室內陶瓷電熱塞加熱裝置。 -
Electro - optical curves for lc cells have been analyzed and it has been shown mat a large attenuation range and a shallow attenuation slope can be achieved simultaneously for a variable optical attenuator based on a parallel - aligned lc cell with an appropriate surface anchoring strength. as compared with the existing liquid crystal - based voa structure ( using two cascaded lc cells with a particular material ), the present structure is simple and has no special requirement for the lc materials
提出了基於弱錨定平行排列液晶盒的可變光衰減器（衰減范圍大、衰減曲線下降平緩以保證調節精度） ，與己有液晶型可變光衰減器結構（選用特定液晶材料、兩個液晶盒級聯結構）相比較，本論文提出的基於弱錨定平行排列液晶盒的可變光衰減器結構簡單，同時對于液晶材料無特殊要求。 -
3. compared and analyzed the influences to the mode of the electro - magnetic field and also the influences to the position where the plasmas produced when changes the size and the internal structure of the cavity
3 .比較分析了諧振腔的結構尺寸及其內部構造改變對電磁場模式的影響，等離子體在腔體內部的產生位置。 -
Abstract : the mechanism and structure of electro - magnetic water conditioners are presented and the attentions in design are indicated
文摘:介紹了電磁場水處理的作用機理、幾種水處理器構造和採用電磁水處理時在設計中要注意的問題。 -
( 5 ) cdse nano - wire arrays / aam composite, cdse nano - wire arrays and cdse nano - wire were prepared by template - electro - deposition in seleneous acid ( hasech ) solution and selenosulfite ion ( sesoa2 " ) solution. then the image, composition and structure of those products were investigated by sem, tem, eds, xps and x - ray diffraction ( xrd )
（ 5 ）分別以hzseo3和seso32一為硒源，用模板一電沉積法在納米孔陣列aam模板中制備出cdse納米線陣列/ aam復合物，然後溶解掉納米孔陣列aam ，寧} ） ij得了cdse納米線陣列和cdse納米線。 -
The purpose behind this thesis is to study the nonlinear electro - mechanical coupling perfo rmance, and to have relatively simple yet substantial constitutive relations of ferro - electrics, that can eventually provide guidance for material design, sensor or actuator structural analysis and life expectancy for ferro - electric structure and system
本論文就是針對鐵電材料的非線性力電耦合性能進行研究與分析，以期能對其本構關系作出簡單明確的描述，為鐵電元器件的材料設計、結構分析及壽命估計等提供依據。 -
Micro structure and corrosion resistance of electro - deposition ni - w - p amorphous alloy
非晶合金的組織結構與耐蝕性能 -
Sequently it deals with frequency characteristics of the rudder and loading systems in matlab and simulate the system with 20 - sim. when improve the loading performance with adding the structure invariance principle to eliminate surplus force. to improve loading performance of loading system controlled by p - q servo - valve, this dissertation analyzes the uncertainties of electro - hydraulic load simulator, then designs a robust controller
在此基礎上，應用matlab對舵機系統和加載系統進行頻域分析，利用20 - sim軟體完成對系統的時域模擬，並採用結構不變性原理來抑制多餘力干擾，改善系統的加載性能。 -
Design difficulties, parameters calculation, design structure and characteristics of single arm electro - hydraulic hammer have been introduced
摘要介紹了單臂電液錘設計難點、結構參數的設計計算及單臂電液錘的特性。 -
It has some advantages other than inorganic materials, such as quick response, large electro - optical coefficient, wide transparence, simple manufacture, low cost and easy for integration, etc. some pyridinium salts with " d - - a " structure have very excellent tpa and up - conversion fluorescence properties, so they are the possible candidates to be used to make tpa up - conversion dye lasers
這類材料具有響應速度快、電光系數大、透光波段寬、制備簡單、成本低廉、易於集成等優點。 「 d - - a 」型的吡啶鹽系列染料具有非常優秀的雙光子吸收和激光上轉換性能，是雙光子上轉換激光器的候選材料。 -
According to the structure of a electro - magnetic gear couple, this research paper analyzed the main magnetic circuit as well as derived the calculation formulas for its uneven working and assembling air - gap magnetic conduction
摘要根據電磁齒輪的結構特點，分析了電磁齒輪傳動的主磁路，並推導出非均勻的工作氣隙磁場與裝配氣隙磁場磁導的計算公式。 -
After completing the static and dynamic experiments on the5 electro - hydraulic component & system test unit, the author made further experiment research in the close loop system of hydraulic elevator, and get satisfying testing results. to sum up, the author build a set of theories and formulary for the design of integrated valve, change the traditional methods for the structure design of hydraulic elevator valves by the tools of pro / e, carry out a lot tests of the integrated valve on the special test platform
縱觀全文，作者對針對液壓電梯專用集成閥建立了一套比較完整的設計計算的理論依據；採用三維造型軟體對集成閥進行實體建模，改變了液壓電梯專用集成閥的傳統結構設計方法，使集成閥的結構設計達到了更好的效果；利用專門的電液元件測試平臺和液壓電梯臺架對集成閥進行了比較全面的實驗，拓展了新元件的實驗研究手段。 -
After that, a complete solution to design the pipe rupture valve of the hydraulic elevator with fluent and matlab simulation software ; deserting the traditional method, gives a solid modeling for the pipe rupture valve with the 3 - d cad software which offers greater effects for the structure design of the pipe rupture valve ; using special electro hydraulic and hydraulic elevator experiment rig, the pipe rupture valve is completed test. the pipe rupture valve has important significance for the utilization and production of the hydraulic elevator technique
然後針對液壓電梯專用限速切斷閥，通過fluent流場模擬軟體和matlab模擬軟體的分析，建立了一套比較完整的設計計算的方法；採用三維造型軟體對限速切斷閥進行了實體建模，改變了傳統的結構設計方法，使限速切斷閥的結構設計達到了更好的效果；利用專門的電液元件測試平臺和液壓電梯臺架對限速切斷閥進行了比較全面的實驗，拓展了新元件的實驗研究手段。 -
Electro - deposition method is one kind of up - to - date way to fabricate materials, and template technique owns more advantages than other techniques when it is used in preparation of nano - structure materials
電沉積法是制備材料的一種新興的方法，模板技術在制備納米結構材料時具有許多其它技術不可比擬的優點。 -
First, this paper outlines the structure, the basic operation principle, static characteristic and mathematic model of the novel double salient electro - magnetic motor. with the help of matlab, the paper set up the dynamic simulative model of the high voltage dc generating system based on the generator. some examples are simulated on this model
本文首先簡要介紹了新型電勵磁雙凸極電機的結構、基本工作原理、靜態特性、數學模型，利用matlab建立了電勵磁雙凸極高壓直流發電系統的動態模擬模型，給出了模擬實例。
分享友人