film strength 中文意思是什麼

film strength 解釋
薄膜強度
  • film : n 1 薄層，薄膜；薄霧，輕煙；細絲狀的東西。2 【攝影】感光乳劑，照相軟片，電影膠片；影片。3 〈 pl ...
  • strength : n. 1. 力，力量，體力。2. 強度，濃度；長處；（要塞等的）抵抗力。3. 實力；兵力；全體人數，額定人數，編制。4. 筆力；文勢。5. （證券等的）市價堅挺。6. 〈美俚〉（可能有的）利潤。
  1. Copper has been deposited on surface of the al mmcs as interlayer by magnetron sputtering, tlp bonding of al mmcs with these interlays, the joints shear strength of tlp bonding using deposited film was as much as the joint shear strength of tlp bonding using cu foil. removing the oxidation on the surface before deposition, copper was coated by magnetron sputtering as tlp bonding interlayer

    待連接表面通過磁控濺射法沉積銅膜作為中間層進行瞬間液相連接，得到的接頭強度與銅箔中間層進行瞬間液相連接得到的接頭強度相當，而使用磁控濺射法去除待連接表面氧化膜后沉積銅膜作為中間層進行瞬間液相連接的接頭強度提高7 . 6左右。
  2. Abstract : the therortical calculation of the bending stress of the root and experimental stress analysis on the modified profile and the standard involute tooth profile were made with the finite element method and the electric resistance strain film method. this indicated that the modified profile was supe rior to the standard involute profiles in terms of the bending strength

    文摘:分別用有限元和電阻應變片法對修形齒形和漸開線齒形進行齒根彎曲應力計算與實驗應力分析.結果證明在彎曲強度方面修形齒形比標準漸開線齒形更優越
  3. The binding principle in pelletizing covers a comprehensive model of interfacial reaction among particles inside green pellets, the formation of binding film during hardening of green pellets by baking to obtain enough strength for a volumetric catalyzed reduction model for cold - bound pellets bearing composite binder and corresponding high temperature reduction system in rotary kiln

    提出了含復合粘結劑的生球強度界面作用力綜合模型，冷固球團礦強度的粘結膜機理，含復合粘結劑的冷固球團礦催化還原體積反應機制及全窯高溫快速還原熱工制度。
  4. Period, after falling off as a result of the film inside the uterus, make uterine antrum forms a surface, need course of a rehabilitate, in this meantime, body strength of the female is poorer, the motion of intense of unfavorable ginseng aggravate and hard physical labor, lest cause classics blood overmuch, menses is lengthened, damage healthy

    經期，由於子宮內膜脫落後使子宮腔形成傷面，需要一個修復過程，在這個其間，女性的身體反抗力比較差，不宜參加劇烈的運動和重體力勞動，以免引起經血過多，月經期延長，損害身體健康。
  5. The strength of flat film made by casting method is only 55mpa, while that of tubular film made by blown - extrusion method is high to 250mpa and is 2. 5 times strength of cellophane

    刮膜法制備的平膜強度較低，而吹膜法制備的管膜強度達250mpa ，是玻璃紙的2 . 5倍，這與分子鏈的取向有關。
  6. Provides the remarkable oil film strength, prevented the coupling slips

    提供卓越的油膜強度，防止離合器打滑。
  7. Film strength ability of a film of lubricants to resist rupture due to load speed and temperature

    油膜強度潤滑油油膜抵抗因負荷、速度和溫度而造成破裂的能力。
  8. An investigation on force controlling method for measuring fracture strength and toughness of diamond film

    測定金剛石膜斷裂強度及斷裂韌性的力控製法研究
  9. The degrees of crystallinity of pure ptfe under the different conditions of water cooling, air cooling and furnace - varying cooling were made comparison by xrd. the thermal stability of pure ptfe and solid lubricant was analyzed by dsc - tg ; the composition and valence state of elements in the surface of carbon fiber, solid lubricant before and after friction test and lubricant transfer film were characterized by xps ; the frictional property of solid lubricant was tested by pin and disk test rig. the frictional wear property of solid lubricant between embedded bearing sleeve and steel axle friction pair ring was tested by special simulate test machine, the hardness of solid lubricant was tested by pm ; the compression strength of solid lubricant was tested by material test machine

    用sem表徵原料微觀結構、摩擦表面及潤滑轉移膜表面形貌：用xrd進行原料物相分析，及比較水冷卻、空氣冷卻、隨爐冷卻三種工藝條件下的純聚四氟乙烯樹脂的結晶度；用dsc - tg分析純聚四氟乙烯樹脂及固體潤滑劑的熱穩定性；用xps表徵碳纖維表面、固體潤滑劑摩擦前後表面、潤滑轉移膜表面的元素組成、價態變化；用銷盤式摩擦磨損試驗機對固體潤滑劑進行摩擦性能測試；採用專用的臺架模擬試驗機對固體潤滑劑鑲嵌軸承套與鋼軸摩擦副間的摩擦磨損性能進行測定；用萊次偏光顯微鏡（ pm ）測試固體潤滑劑的硬度；用材料試驗機測試固體潤滑劑的抗壓強度等。
  10. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  11. The addition of pmma will reduce the crystallinity of blends and improve of the uptake of liquid electrolyte ( 260 % ) and the ion conductivity ( ims / cm ). at the same time the pvdf - hfp maintains the mechanical strength of blends film acting as polymer framework

    Pmma的加入可以降低共混體系的結晶度，提高共混物的電解液吸收能力（ 260 ）和離子電導率（ 1ms / cm ） ；同時pvdf - hfp起到骨架作用，使共混物膜具有足夠的機械強度。
  12. Through experiment and analyzing the changes of the thickness, rigidity, tensile strength and the opening rate of the conduits caused by the different kinds of coating material, the thickness of the coating and the different braiding structures, we investigate the physical and mechanical, properties of the braided conduits. the results show : the chitosan is easy to form the film structure on the surface of the conduits increasing the conduits ' rigidity clearly ; the rigidity and opening rate of the braided structure with inserted reinforcing yarn are better than the others, this will prevent the conduits collapsing and distorting effectively in the practical uses, so we select conduits of this structure for animal experiment

    在導管的物理機械性能研究方面，本課題通過塗層劑的種類（ pgla丙酮溶液和甲殼胺漿液） 、塗層劑的厚度、導管的編織結構三個方面分析它們對導管的厚度、硬挺度、拉伸強力和孔隙率等性能的影響。測試結果顯示：甲殼胺塗層易於在導管表面成膜，對導管的硬挺度有明顯提高，塗層效果較好；加筋結構神經導管在硬挺度和孔隙率方面優于其它導管，能有效防止導管在實際應用中的塌陷變形。
  13. The tape composed of kraft paper and embossed pve film, and is also characterized by good tensile strength, easy tear etc. suitable for sealing on special purpose

    以牛皮紙為基材的牛皮紙包裝膠粘帶具有拉伸強度大，易撕斷等特點，適用於特殊的封箱用途。
  14. Abstract : this paper derives thecalculating formulas to the contact strength and oil - film thickness of the involute spur gear according to hydrodynamic lubrication principle. through check with test, shows that they may rully replace now available hertz formula and dowsonformula respectively

    文摘:根據流體動力潤滑原理，推導出了漸開線直齒圓柱齒輪接觸強度及油膜厚度的計算公式，通過實驗驗證，說明它們可以完全分別代替現有的赫芝公式及通森公式。
  15. Cps is a transparent coextruded cast polypropy lene film for lamination with one side heat sealable and the other side treated, it has outstanding seal strength, good cof and can be laminated to other materials such as bopp and bopet

    Cps是一種透明的聚丙稀復合性薄膜，它一面可熱封，另一面電暈處理，它有顯著的熱封強度，和良好的摩擦系數，也可以和其他材料復合如bopp和bopet 。
  16. The results from basic properties, shear resistance, pressure strength and point film test show that different low molecular polyamide may affect extrodinary by the properties of cured expoxy resin the higher viscosity, the lower cured activity ( rate ) ; the higher amine number, the stronger cure construction. the cured expoxy resin will prossess unfavourable mechanics when it is cured by the polyamide with both too high viscosity and amine number

    用基本性能、剪切強度、抗壓強度、塗膜性能測定等方法研究了3種不同胺值及粘度的低分子量聚酰胺對環氧樹脂固化物性能的影響.結果表明，聚酰胺粘度大使固化交聯變難，胺值過高易造成固化收縮；同時粘度過大、游離胺含量過高的產品將對固化物各項力學性能不利
  17. The effects of demulsifiers on interfacial tensions and membrane strength were studied for the model and effluence systems from the three - compound - combination flooding field. the interfacial tensions owned by the two - compound - combination system decreased but those owned by the three - compound - combination system increased with increasing the demulsifier concentrations. membrane strength decreased with the increase of demulsifier. the demulsification mechanism of demulsifier is suggested that demulsifier partially replaces the stabilizers and greatly decreases the intensity of interfacial film

    針對模擬采出液和三元復合驅礦場采出液，研究了破乳劑對復合體系界面張力和膜強度的影響.破乳劑濃度增加，二元復合體系界面張力降低，而三元復合體系界面張力升高.破乳劑分子部分頂替乳化劑分子並顯著降低了界面膜強度
  18. For instance : the plum blossom prize, the golden rooster prize winner rather talent, the golden rooster prize winner bayin, the chart gate, the international prize winner germany strength geer, the country " five one " the project prize winner para bead you, the awn comes, hall to look up and so on all is the film and television play center backbone strength

    比如：梅花獎、金雞獎獲得者寧才，金雞獎獲得者巴音、圖門，國際獎獲得者德力格爾，國家「五個一」工程獎獲得者巴拉珠爾、芒來、霍爾查等都是影視劇中心的骨幹力量。
  19. Its main content can be divided into three parts. the first one is the introduction of the european audio - video industry model and its development, including the explicit explanation of the public funding in europe involving the description of public funding, the public funding support of the film industry, the support to the television industry, the technology departments, multi - media, the video and the support from cnc to the film and television groups, then it introduces the development of the european audio - video industry involving the status of the public broadcasting in europe, the strength of the european audio - video industry in the whole world and the analysis of the advertising industry

    大體內容可以分為三部分:第一部分是歐洲視聽產業模式及其發展狀況，首先是對歐洲視聽產業公共資助進行了詳細的介紹，包括對資助基金的描述、對電影產業的公共資助、對電視產業的資助、對技術部門、多媒體和視頻的資助以及cnc對致力於影視業團體的資助;然後介紹了歐洲視聽產業發展情況，包括公營視聽在歐洲的地位，歐洲視聽產業在全世界的實力及其廣告業態分析。
  20. The relation of the film thickness, the leakage and the carrying capacity of the reactions in practical condition are pointed out. it has calculated the load coefficient and spring strength and so on

    指出了具體條件下膜厚、泄漏量及承載力的關系，並對干氣密封的載荷系數、彈簧力等進行了計算。
分享友人
分享到 Line

分享到臉書