linear system simulation 中文意思是什麼

linear system simulation 解釋
線性系統模擬
  • linear : adj. 1. 線的，直線的。2. 長度的。3. 【數學】一次的，線性的。4. 【動、植】線狀的；細長的。5. 由線條組成的，以線條為主的，強調線條的。
  • system : n 1 體系，系統；分類法；組織；設備，裝置。2 方式；方法；作業方法。3 制度；主義。4 次序，規律。5 ...
  • simulation : n. 假裝；模擬；裝病，裝瘋；【生物學】擬態，擬色。
  1. The system can display in 3d the robots with higher quality graphics on pc by adopting the solid model technology, and modify the model of robots according to the size given by users, so that the parametric modeling is realized under interactive mode. it realizes the graphics simulation of robots in kinematics in both articulatory space and cartesian space, and it also realizes the animated simulation of trajectory of linear interpolation in point - to - point mode. the movement of robots can be realized by graphics teaching or programming

    該系統採用實體造型，能在微機上顯示較高質量的機器人的三維圖形，可以按照用戶給出的尺寸修改模型，在交互方式下，實現機器人的參數化造型；系統能夠在關節空間和笛卡爾空間中進行運動學的圖形模擬，能進行點到點直線插補軌跡的動畫顯示，機器人的動作可以示教再現，也可以由程序設定。
  2. This thesis tries to update the cmdsr system to achieve the characters below : real - time, better robust, higher recognition rate, non - special - man. considering the disadvantages of traditional improved spectrum subtraction speech enhancement, this thesis proposes the theory of fuzzy spectrum subtraction based on the fuzzy theory and improved spectrum subtraction speech enhancement ; as for the difficulties of detecting the endpoint of speech signal, the thesis gives the table of initial and the improved parameters, with which we can confirm the endpoints of mandarin digit speech ; the thesis puts forward two - level digit real - time speech recognition system, the first level is based on discrete hidden markov model which is linear predictive coding cepstrum ( lpcc ) and difference linear predictive coding cepstrum ( dlpcc ), the second level is based on formant parameters ; as for the realization of hardware, the thesis depicts the realization of every part of cmdsr based on the tms320vc5402 in detail ; as for the development of software, the thesis gives the software design flow chart of cmdsr, simulates the basic theory with matlab language and gives the simulation results

    針對傳統的「改進譜相減法語音增強」參數設定單一、環境適應能力差的缺點，提出了一種利用模糊理論和「改進的譜相減法」結合的「模糊譜相減法語音增強」 ;針對語音信號端點檢測困難的特點，通過matlab模擬試驗，給出了能夠準確確定數碼語音端點的初始和改進參數表;提出了利用基於線性預測編碼倒譜參數和差分線性預測編碼倒譜參數相結合的離散隱含馬爾可夫模型進行第一級識別、利用共振峰參數進行第二級識別的兩級漢語數碼語音識別系統，在保證系統實時性的同時，實現連接漢語數碼語音識別系統識別率的提高;在硬體實現上，詳細闡述了基於tms320vc5402的連接漢語數碼語音識別系統各部分硬體設計;在軟體開發上，給出了連接漢語數碼語音識別的軟體設計各部分的流程圖，並對各部分進行了matlab模擬，並給出了模擬結果。
  3. Several semi - active control algorithms used in the semi - active suspension system with mr dampers are proposed and developed including the " on - off " voltage controller, the continuously linear variable voltage controller, the modulated continuously linear variable voltage controller based on " sky - hook " damping concept and the hybrid controller based on the combination of " sky - hook " damping concept and " ground - hook " damping concept and the fuzzy logic controllers using measurements of the relative displacement between the sprung and unsprung mass or the absolute acceleration of the sprung mass as the input variables of fuzzy logic controllers. the simulation models were prepared in matlab ? simulink ? fuzzy toolbox programs. the experiment setup of the semi - active suspension system with mr dampers in the lab has been designed and developed

    根據磁流變阻尼器特性和對懸架系統動力學特性的規律性研究，為磁流變阻尼器設計了基於「天棚」阻尼控制概念的「 on - off 」 、線性連續和修正的線性連續控制策略，基於「地棚」阻尼控制概念的磁流變阻尼線性連續控制策略， 「天棚」阻尼和「地棚」阻尼控制概念線性組合起來的磁流變阻尼混合控制策略，根據模糊控制原理設計了以簧載質量和非簧載質量間相對位移或簧載質量加速度分別作為輸入變量的模糊邏輯控制器用於磁流變阻尼半主動懸架的智能控制。
  4. Through the simulation and error comparison between classics regression model and neural network model, it showed that bp should be applied in liquid concentration measurement system to improve measurement accuracy and decrease the non - linear effect from temperature

    通過模擬研究，與傳統的回歸模型進行誤差對比，得出了應採用bp神經網路技術建立智能化液漿濃度測量模型，提高測量精度，克服溫度變化非線性影響的結論。
  5. A novel dynamic evolutionary clustering algorithm ( deca ) is proposed in this paper to overcome the shortcomings of fuzzy modeling method based on general clustering algorithms that fuzzy rule number should be determined beforehand. deca searches for the optimal cluster number by using the improved genetic techniques to optimize string lengths of chromosomes ; at the same time, the convergence of clustering center parameters is expedited with the help of fuzzy c - means ( fcm ) algorithm. moreover, by introducing memory function and vaccine inoculation mechanism of immune system, at the same time, deca can converge to the optimal solution rapidly and stably. the proper fuzzy rule number and exact premise parameters are obtained simultaneously when using this efficient deca to identify fuzzy models. the effectiveness of the proposed fuzzy modeling method based on deca is demonstrated by simulation examples, and the accurate non - linear fuzzy models can be obtained when the method is applied to the thermal processes

    針對模糊聚類演算法不適應復雜環境的問題，提出了一種新的動態進化聚類演算法，克服了傳統模糊聚類建模演算法須事先確定規則數的缺陷.通過改進的遺傳策略來優化染色體長度，實現對聚類個數進行全局尋優;利用fcm演算法加快聚類中心參數的收斂;並引入免疫系統的記憶功能和疫苗接種機理，使演算法能快速穩定地收斂到最優解.利用這種高效的動態聚類演算法辨識模糊模型，可同時得到合適的模糊規則數和準確的前提參數，將其應用於控制過程可獲得高精度的非線性模糊模型
  6. First, the paper designs the loading system on the basis of given loading data. then, it sets up the linear model of simulation and simulate

    本文首先進行起落架加載系統的靜態參數設計並建立其線性化模擬模型，然後進行模擬。
  7. First, the loading system is designed on the basis of given loading data. then, the linear model of simulation is set up and simulated

    首先根據用戶給定載荷及要求對系統進行設計，然後根據初步設計建立系統模擬模型，對多餘力和加載曲線進行模擬。
  8. The basics of lithography process, as well as the basic structure of lithographic system and the basic theory of partially coherent imaging are introduced in this paper. a bi - linear model of optical imaging is also presented. based on these theories, the simulation process of csplat is particularly analyzed, especially the computation of tccs ( transmission cross coefficient ) under different illuminations and the processing of primary lens aberrations inside tcc computation process

    本文從光刻基本過程入手，介紹了光刻機光學系統的基本組成、部分相干光透射成像的基本原理，提出了光學系統的雙線性模型，並在此基礎上詳細分析了模擬軟體splat的模擬過程，其中著重分析了光學系統的傳輸交叉系數tcc的計算，包括不同照明系統下tcc的計算以及tcc計算中像差的處理。
  9. Under windows nt and labview development environment, using the linear fit module, exponential fit module > general polynomial fit module of labview to design a method for fitting the experiment data, the results of curve fitting indicate that the purpose of general polynomial fitting is better than the rest. separating the equivalent input impedance of magnetostrictive transducers without stimulate current from input impedance of it with stimulate loop based on the results of curve fitting, and determining the syntony frequency and electric simulation network parameters of magnetostrictive transducers by this input impedance. finally, with labview network functions, realizing magnetostrictive transducer electric simulation system based on web server and discussing a scheme for this system network by datasocket. the method of this paper can more accurately determine the syntony frequency and electric simulation network parameters of magnetostrictive transducers than the testing method of syntony & anti - syntony. at the same time, discussing virtual instrument measurement system and how to realize magnetostrictive transducer electric simulation network system by labview network functions of network virtual instrument measurement development environment

    在windowsnt系統環境和labview虛擬儀器技術開發平臺下，首次利用labview中的直線擬合模塊、指數擬合模塊以及多項式擬合模塊，設計了一種對實驗所得數據進行曲線擬合的方法，對三種擬合方法進行了比較，曲線擬合結果表明，多項式擬合方法相對于其它兩種擬合方法效果更好；根據曲線擬合的結果可從帶激勵線圈的磁致伸縮換能器的輸入阻抗中分離出磁致伸縮換能器鐵芯在無激勵電流時機械振動形成的等效輸入阻抗，並由此輸入阻抗確定了磁致伸縮換能器的諧振頻率及其電氣模擬網路參數；最後通過labview提供的網路功能，實現了基於web服務器的磁致伸縮換能器電氣模擬虛擬儀器測試系統，並探討了通過datasocket技術實現該系統網路化的方案。
  10. Based on the theory of piecewise - linear, the paper carries through the research of model self - adaptive control to electric arc - furnace electrode regulator system ( eafers ), and the digital self - adaptive control law of reference model is deduced. then, we designed the software simulation system of eafers according to the law, though which we studied the character of eafers. finally, a set of physical model of eafers, which is realized by hardware circuit, is designed according to the former research

    本文首先應用分段線性化理論，對電弧爐電極調節系統的模型參考自適應控制演算法進行了研究，推導出全數字化的模型參考自適應律；然後根據推導出的自適應律成功的設計出了的軟體模擬系統，用軟體對電弧爐電極控制進行了模擬研究；最後利用電子電路構造出一套完整的電爐煉鋼電極控制硬體模擬系統，對電爐電極調節進行了實驗室電路模擬研究。
  11. Presents a new algorithm for detection of collision between two convex objects to improve the efficiency of collision detection during robot path planning in the robot simulation system, which establishes a linear system whithout variables based on a linear equation system in euclidean space through a series transformation, and concludes that collision is detected if the system contains no dilemma

    如何進一步提高碰撞檢測的速度在智能機器人路徑規劃中非常關鍵.為此給出了一種新的碰撞檢測演算法；它是以空間中的平面方程為基礎，將一組平面方程進行幾次代數變換得到一組常數不等式，觀察這組常數不等式中是否含有矛盾不等式即可判定機器臂是否與空間中的障礙物相撞
  12. In order to improve dynamic performance of the control system in the assembly robot, according to acpmsm ( ac permanent magnet synchronous motor ) vector control model and the control idea about preview control, the paper presents a kind of control strategies that is composite of a primary pid ( proportion integral dif - ferenfial ) with a preview feed - forward compensation, its compensation is equivalent to linear combination of future adjacent difference, the simulation results show that it can not only improve the system tracking performance effectively, but also implement easily

    摘要為了提高裝配機器人控制系統的動態性能，依據交流永磁同步電機矢量控制模型，從預見控制的思想出發，提出了一種在原有pid基礎上外加預見前饋補償的控制方法，這種控制方法的前饋補償項取未來幾項目標值一階差值的線形組合，並模擬驗證了該控制方法對提高系統跟蹤性能的有效性和簡單可行性。
  13. This paper establishes the linear model of hydro - turbine and deducts its transfer coefficients. then the optimized operation parameters are gained in the frequency disturbance and load rejection simulation. through comparing dynamically, this paper analyses the impact on its dynamic performance if some governing system parameter changes

    在研究小波動情形時，即系統在穩定工作工況點附近小瞬變時，可以把非線性系統進行線性化處理;本文建立了水輪機調節系統的線性化模型，推導了其中的傳遞系數;對水輪機調節系統的頻率擾動和機組突甩負荷工況進行了模擬試驗，整定了最佳調節參數;通過動態比較，分析了調節系統參數改變對其動態性能的影響。
  14. In this paper, we aim at establish heat and mass coupled transfer model in the building wall, the emphasis of this study lies in creating a coupled and non - linear diferential equation system for the heat air and moisture transfer in the wall, which can be described by means of continuum mechanics and irreversible thermodynamics, the most dominant factor is moisture conten 9la gas pressure pc and temperature t, for the description of heatair and moisture transport, the general mass balance equation can be expressed by the temporal change of moisture conten 9 l, gas pressure pc and temperature t that means, in order to create a closed solvable equation system, the other additional dependencies have to be found, which the other variable depending on the variables of the solution : moisture conten 6 l gas pressure pc and temperature to the model is verified by the numerical simulation software which has been developed about building wall.,

    根據節能設計要求，本文用熱力學的方法，並根據多孔介質中多相流體流動描述方面的最新研究成果? ?體積平均方程，建立了墻體熱、濕和空氣耦合熱質傳遞模型，並推導出熱、濕和空氣耦合傳遞等效擴散方程；找到建築墻體熱、濕及空氣耦合作用下熱質傳遞過程的主要影響因素濕容量_ l 、氣壓p _ c和溫度t 。開發了單體材料墻體熱質傳遞數值模擬軟體，用實測數據對軟體進行調試並對模擬計算結果進行了驗證。模擬出了單材料墻體在熱、濕和空氣耦合作用下建築墻體內的溫度和濕度分佈規律。
  15. Presents a simple method of compensating friction against the character of the nonlinear model of a brushless dc motor system which transfers the original system model to a simple linear model using the method of input - output linearization, and estimates the coulomb friction in the system in real - time using a nonlinear friction estimator, and then compensate the friction in the system using a friction feedforward, and concludes from simulation results that this method can effectively eliminate the influence of friction in brushless dc motor systems

    針對無刷直流電動機系統的非線性數學模型特點，提出了一種簡單的摩擦補償方法.該方法首先利用輸入輸出線性化方法將原系統模型轉化為一種簡單的線性模型，然後給出一種非線性摩擦估計器實時估計系統中的庫侖摩擦值，最後利用摩擦前饋補償方法對其進行補償.模擬結果表明該方法可以有效地抑制無刷直流電動機系統中的摩擦影響
  16. The system has realized the complete parameter lamination display in the daqing oil field power network and the entire 6kv circuit in oil field enters the simulation disk management. the graph region has the function that can enlarge, doubles shrink doubles put and linear doubles put. it has the entire screen roam and district display different menu function, it can display the system real - time movement way according to the network topology data

    系統實現了對大慶油田電力網全部參數的分層顯示、全油田所有的6kv電路都進入模擬盤管理;圖形區域具有放大、倍縮倍放、線性倍放功能;具有全屏漫遊、分區顯示不同畫面功能，能根據網路拓撲結構數據顯示系統實時運行方式。
  17. Abstract : a general bpm simulator for optical waveguides is presented in this paper. this system includes three tools : the effective refractive index calculation tool, the waveguide mode solution tool, and the beam propagation method simulation tool. this system is very useful for the optimal design of the linear optical waveguide devices

    文摘:介紹了一個光波導器件計算機輔助分析系統，該系統集成了3個實用工具：光波導有效折射率計算工具，光波導模式求解工具和三維復折射率全矢量有限差分束傳播法模擬工具.本系統用於線性波導器件，模擬光在波導中的傳播過程，從而可以優化設計波導器件，探索新結構器件
  18. Firstly, the basic theory of switch reluctance generator ( srg ) is discussed in detailed, based on the mechanism electric energy converting analysis, non - linear analysis and non - linear simulation. three control methods of srg ( angle position control method, current chopping control method, pulse width modulation control method ) are deeply studied and analyzed. the electronic controller, which controlled by dsp or by hardware circuit are developed for low - power switched reluctance generation system

    首先系統地研究了開關磁阻電機發電運行的基本理論，從機電能量變換的角度分析開關磁阻發電機的機電能量變化規律；通過非線性分析和非線性模擬方法，明晰開關磁阻電機發電本質，概括出開關磁阻電機發電運行的特點；系統、深入地研究了開關磁阻電機發電運行的控制方案（角度位置控制、電流斬波控制、脈寬調制控制） 。
  19. Based on compensation control thought, through using neural network pid controller as compensation tache of traditional pid controller, a kind of hybrid pid controller is designed. combined with neural network, self - tuning control can realized better control over non - linear system. utilizing the advantages of fuzzy control and neural network control, a kind of neural network adaptive fuzzy controller based on fast bp algorithm is presented and it may control the plant on line. at last, the hybrid pid controller is applied in tension system of h - section continuous rolling mills and tension - free control is realized. the simulation results show that it has better performance than traditional pid controller. at the same time, it provides some reference for the control of other similar systems

    在此基礎上，基於補償控制思想，利用神經pid對傳統pid進行補償，設計了一種混合pid控制器；神經網路與自校正控制的結合，使得自校正方法能對非線性系統實現比較理想的控制效果；利用模糊控制與神經網路控制各自的優點，提出了一種基於快速bp演算法的神經網路自適應模糊控制器，能夠對系統進行在線控制。最後將混合pid控制應用於h型鋼連軋機張力系統中，實現微張力控制，模擬結果說明其較傳統pid具有更好的性能，同時也為其它類似系統的控制提供一些參考。
  20. Linear system simulation

    線性系統模擬
分享友人
分享到 Line

分享到臉書