melting time 中文意思是什麼

melting time 解釋
熔化時間
  • melting : adj. 1. 融[熔]化的。2. 心軟的，受感動的，易感動的。3. 使人感動的，使人感傷的，溫柔的，動人的。
  • time : n 1 時，時間，時日，歲月。2 時候，時刻；期間；時節，季節；〈常pl 〉時期，年代，時代； 〈the time ...
  1. The results show that there is anomalistic crystal whose size reaches nanometer grade in fine pvc ; the crystal structure is damaged by jet - milling, which induces the melting point of nanocrystal pvc decreases from 210 to 128. the nanocrystal pvc induces the decrease of plasicizing time and equilibrium torque and the increase of maximal torque, which show that the nanocrystal pvc have self - plasticization in pvc composites

    通過sem 、 tem 、 ftir和dsc測試表明：氣流粉碎制得的pvc微粉中具有不規則納米晶體；氣流粉碎破壞了pvc的晶體結構，使納米晶pvc的熔點從210下降到128 ；納米晶pvc使體系塑化時間、平衡轉距的降低、最大轉距升高，具有自增塑作用。
  2. The margin of time for averting crisis was melting away.

    可以用來消彌這一危機的些許時光正在逝去。
  3. Distant effect of jurassic collisions of qiangtang terrane, lasa terrane and paleo - pacific land onto the eurasian land made east qinling - dabie mountains in a compressional circumstance for a long time, and suppressed its orogenic extension ; whereas, cretaceous late - collisional extension and appearance of west pacific trench - arc - basin system relieved east qinling - dabie mountains of external compression, instantly result in violent orogenic lithosphere delamination - extension and depressurized - calefactive melting, and consequently, led to the formation of large scale early cretaceous granitoids and intermediate - acidic volcanic rocks

    羌塘地體拉薩地體和西太平洋古陸在侏羅紀與歐亞大陸拼貼碰撞的遠距離效應使東秦嶺大別造山帶長期處于擠壓環境，伸展作用被抑制白堊紀的碰撞晚期伸展和西太平洋溝弧盆體系的遠距離效應使東秦嶺大別地區的外部擠壓消失，導致造山帶巖石圈迅速強烈拆沉伸展和減壓增溫熔融，從而形成大規模早白堊世花崗巖類和中酸性火山巖。
  4. Cma, as an alternate deicer, tends to inhibit corrosion and appears to be relatively harmless to the environment. but cma is expensive because of the high price of its material, and it has less ability in melting ice than sodium chloride. besides these, cma sticks to wet surfaces and can congeal to form hard chunks, difficult to store for a long time, dusty and a strong vinegar smell when spread

    而cma是對氯化物鹽除冰劑的重大改進， cma具有無污染，環保的特點，對金屬幾乎無腐蝕，但由於原料價格昂貴，使得cma的價格不菲， cma對冰的融化能力不如氯化鈉， cma易結塊，不宜長期儲藏，在撒布時形成的粉塵及刺鼻的酸味亦是需要改進的地方。
  5. In the paper, the diabase fiber was also selected to reinforce pvc for the first time, which has high intensity, high rigidity and low cost, the diabase fiber was treated firstly, then during mixing, melting, pressing procedure, the diabase / pvc composite were prepared

    本文首次對高強度、高剛度、低成本的輝綠巖纖維增強pvc復合材料進行了研究。論文首先對輝綠巖纖維進行了表面改性，然後將改性后的輝綠巖纖維與pvc混煉、壓片制備了輝綠巖纖維pvc復合材料。
  6. And relevant expert think bad assets particularly like " ice - roily ", hold among hand the longer time have, melting the more, there is the lower value now

    而有關專家認為不良資產尤如『冰棍』 ，握在手中的時間越長，融化得越多，現有價值越低。
  7. 5, both melting point ( tm ) and isotropization temperature ( tj ) of all the three series compounds change regularly with the carbon numbers of the end alkoxy group increased. there is a gradual increase in smectic phase length and in the smectic - nemetic transition temperature. at the same time there is a gradual decrease in nemetic phase length

    五，三個類型化合物16ia至16id 、 16ila至16lid 、 17ia至17id 、 17ila至17lid 、 18ia至18id和18ila至18lid的熔點和液晶態的清亮點均化合物分子中末端烷氧基增大逐漸降低；近晶相的溫度范圍和近晶相一向列相轉變溫度逐漸增大，而向列相的溫度范圍遞減。
  8. The moderate supersonic carbon added to the mold flux for ultra - low carbon steel is used to stay the melting speed as skeleton. then the mold flux coils have the good adiabatic, insulation and even flow property. at the same time it cause the carbon increase in the steel slabs and the operation of the ultra - low carbon is affected at last

    超低碳鋼連鑄結晶器用保護渣中，外加中超碳黑作為骨架降低熔化速度，使保護渣具有良好的絕熱保溫性、均勻流動的潤滑性，但同時卻會引起鋼鑄坯的碳增量，最終影響超低碳鋼的成功操作。
  9. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  10. Being demonstrated by production data, the benefits of both economical and social have been achieved by more stable melting process, decrease of bof reblow rate, less consumption of raw material, longer converter campaign, shorter melting time, better working conditions with computerized automatic steel making process on 120 - ton bof at tonggang

    摘要實際生產數據說明，通鋼120t轉爐實現副槍和動、靜態模型控制下的自動用煉鋼工藝后，吹煉過程穩定，補吹爐數少，鋼鐵料、合金消耗低，爐齡提高，轉爐冶煉周期縮短，工作環境改善，使轉爐副槍系統的應用取得了很好的經濟效益和社會效益。
  11. At the same time an apparatus of zone melting is designed, the method of zone melting is used to purify the purified product of recrystalizing. after purification, the homogeneity and stability of the purified product of antioxidant d and bht are examined by high performance liquid chromatography ( hplc )

    實驗研究結果：防老劑d重結晶提純工藝為：每次取10g工業品防老劑d ，經過堿洗后，去離子水洗滌至中性，溶於100ml乙醇中，同時用粉狀活性炭（ 1g次）脫色、過濾、母液靜置2h后，再放入冰箱結晶2h 。
  12. This time they are threatened by floods from the mountain ( melting ) of the ice age

    這一次它們會面臨冰期融水引發的洪水的威脅。
  13. This is the best time, talking and reading, the world melting away into words, although sometimes a phrase is so beautiful i have to walk around a little just to let them settle in

    現在是閑談和讀書的最好時光，整個世界融化在字里行間，雖然有時候一些措詞太美麗了以致我不得不踱上幾圈讓它們有頭緒。
  14. Combining the unstable heat conduction in crystal layer with heat transfer of undeveloped slug flow in a vertical tube, a time - progression model of crystal layer growth in the bubble column crystallizer pipe is proposed, the calculation results from the numerical method agree well with the experimental data. under certain operating conditions, the periodical arrival of gas plugs can cause crystallization and partial re - melting occur in the crystal - melt interface

    結合未充分發展彈狀流的傳遞特徵和晶層內不穩定導熱，提出了鼓泡塔結晶器管內晶層生長的時間級聯模型，與實驗值吻合良好.特定操作條件下，隨彈狀泡的到來和離去，結晶界面可發生結晶-部分重熔
  15. 3. the effect of melting temperature and time on the properties of na2o4teo2 glass from different raw materials is studied and proper melting temperature and time for making na2o4teo2 glass with composition close to the designed one are determined. it is found that when melted at low temperature for short time, the na2o4teo2 glass from different raw materials will show different thermal properties

    通過熱分析和紅外分析等手段，對由不同原料在不同熔化條件下所得的玻璃進行分析，發現熔化條件不同時，由不同原料所得玻璃的性能也有很大差別，發現了不同研究者報導的同成分玻璃性能不一致的根本原因是熔制條件不同導致的玻璃成分差別。
  16. The results showed that the melting ratio of silica flux decreases and the complete melting time prolongs with the size of silica flux and matte grade increasing, and the effect of the blowing air and oxygen enrichment is not remarkable in the high grade copper matte converting process

    對于高品位冰銅轉爐吹煉，鼓入氣體流量和氧濃度對石英熔劑熔化率影響不顯著；熔劑粒度和冰銅品位對熔化率影響顯著，並隨著熔劑粒度和冰銅品位的增加，熔劑熔化率降低，完全熔化時間延長。
  17. The introduction of lateral rods firstly induced the decrease of crystallization ability, which resulted in the descent of melting points. further increasing the lateral rods centent resulted in the increase of polymers " melting points. but it was interesting that the solvability was enhanced all the time

    橫向液晶基元的引入首先導致聚合物結晶能力的下降，熔點降低；進一步增加橫向液晶基元的含量，聚合物的結晶能力又逐漸增加，熔點升高，但是，聚合物的溶解性始終變好。
  18. The effect of the melting - current and melting - time on the microstructure of the as - cast sm - fe alloy is investigated and the phase composition of the as - cast sm - fe alloy with different sm content is analyzed. the parameters of the melting process and the proportion between different chemical elements are decided, which are based on the above - mentioned investigation and analysis

    實驗中研究了不同熔煉電流和熔煉時間對鑄態組織的影響，並對不同含量的sm - fe合金退火前後的相組成進行了分析，在此基礎上確定了熔煉參數和成分配比。
  19. The maximal power outputs of 37. 0 mw / cm2 and 30. 0 mw / cm2 for the p - and n - type laminated materials respectively at the temperature difference 490 have been experimentally obtained, which are about 2. 5 and 3. 0 times those of - fesi2. chemical analyses show that the interface failure between the bridge alloy and the semiconductor bi2te3 results mainly from the eutectic mixtures with low melting point and brittle compounds formed during welding and long time annealing at 190. it is found that the electrical properties of a laminated structure are mainly controlled by the wettability of the bridge alloy on the semiconductor surface

    發現： 1 ）疊層材料具有明顯優于均質材料的熱電性能，在490溫差下， p -型和n -型疊層材料的最大輸出功率分別達到37 . 0和30 . 0 （ mw / cm ~ 2 ） ，是同類型均質- fesi _ 2的2 . 5和3倍； 2 ）在焊接過程和190長時間退火處理過程中，焊接過渡層合金和基體半導體（特別是bi _ 2te _ 3 ）之間存在明顯的元素相互擴散，從而在過渡層中形成一些低熔點共晶體和脆性化合物，這是導致疊層材料破壞的主要原因； 3 ）焊接過渡層合金與半導體基體之間的潤濕性是影響界面層電性能的主要因素。
  20. The results showed that there was anomalistic crystal whose size reached nanometer grade in fine pvc ; it ' s about 80nm. the crystal structure was damaged by jet - milling, which induced the melting point of nanocrystal pvc decreased from 210 " c to 128 擄 c. the nanocrystal pvc induced the decrease. of plasicizing time and equilibrium torque and the increase of maximal torque, which showed that the nanocrystal pvc had self - plasticization in pvc composites

    通過sem 、 tem 、 ftir和dsc測試表明：氣流粉碎制得的pvc微粉中具有不規則納米晶體，尺寸在80nm左右；氣流粉碎破壞了pvc的晶體結構，使納米晶pvc的熔點從210下降到128 ；納米晶pvc使體系塑化時間、平衡轉距降低、最大轉距升高，具有自增塑作用；納米晶pvc的加入使pvc的沖擊和拉伸強度都有大幅度上升。
分享友人
分享到 Line

分享到臉書