milling method 中文意思是什麼

milling method 解釋
連礦法
  • milling : n 1 磨；制粉；碾碎。2 【機械工程】銑；銑削法；銑出的齒邊。3 軋貨幣的花邊，軋出的花邊；漿洗。4 〈...
  • method : n 1 方法，方式；順序。2 （思想、言談上的）條理，規律，秩序。3 【生物學】分類法。4 〈M 〉【戲劇】...
  1. Through preparative experiments and optimized experiments on cu ~ zn ultrafine powders that are prepared by the method of thermal spray and ball milling, the author finds that dispersants concentration, dispersing time, ph, temperature and adscititious ions have significant influences on dispersing effects

    西安理工大學碩士學位論文通過對熱噴塗球磨法制備的超細銅鋅粉的分散性進行預試驗和優化試驗，發現分散劑濃度、分散時間、 ph值、溫度和外加離子濃度對分散作用效果有重要影響。
  2. The gearing machine tool of the model y3150e is modified and a new milling head is designed to cut the envelope tooth of the pinion using allelomorph method. a assembled drawing of clamp for cutting the tooth shape of circle - arc gear is also presented

    對y3150e型滾齒機進行改造，設計出一新型的銑削頭，利用對偶法加工小齒輪的圓弧包絡線齒形；同時也給出了加工大齒輪圓弧齒形的夾具裝配圖。
  3. In chapter two, we fabricated r - ni - fe / al2o3 nanocomposites successfully by using ball - milling mixing method plus hot - pressing process. meanwhile, their microstructures are characterized by x - ray diffraction ( xrd ) analyser, transmission electron microscopy ( tem ), field emission scanning electron microscopy ( fe - sem ) and brunauer - emmett - teller ( bet ). the results indicate that ni - fe particles are homogenously dispersed in the matrix in the composites

    在第二章中，我們採用高能球磨混合方法加上熱壓燒結工藝，成功制備了ni - 20fe al _ 2o _ 3納米復合材料，並通過x射線衍射儀（ xrd ） 、透射電鏡（ tem ） 、場發射掃描電鏡（ fe - sem ） 、比表面孔隙儀（ bet ）對該復合材料的微結構進行了表徵。
  4. Disigning coolant channel on the firebox of liquid rocket engine to loxodrome ( equal - angle helix ) groove can improve firebox coolant capability greatly. because the width dimension of loxodrome groove is narrow and the depth is deep, some machining methods are incapable, such as end - milling or electrochemistry. according to the peculiarities, a cnc disk - cutter - milling method which is composed of five motion axes with four simultaneously interpolated ones is researched. because most firebox generatrix is composed of complex curves, it is very difficult to get cnc cutting program with manual means. in order to deal with the problem, the loxodrome mathematics model is studied, and an auto - programming software system is developed. the software system can generate cnc cutting program of loxodrome on many kinds of turned surface. the constriction - distension segment of firebox is the most representative workpiece. the sharp changing of its generatrix slope makes loxodrome milling difficult. with the theory analyzing and practice cutting experiment, some applied techniques, which include milling mode and direction, choosing cutter diameter and cutting start point setting, are developed. adopting the technology above, tens regular workpiece have been manufacturing. the two - year manufacture practice has confirmed the validity and feasibility of developed loxodrome coolant channel milling method. the developed technology is also worth to be referenced to other similar workpiece

    將液體火箭發動機燃燒室的冷卻通道設計為斜航線（等傾角螺旋線）槽形，可以大幅度改善燃燒室的冷卻性能.斜航線冷卻槽的槽寬尺寸較小而槽深尺寸較大，所以無法使用棒銑刀銑削、電化學等加工方式.針對這些特點，提出了五軸控制、四軸聯動的數控片銑刀銑削加工方法.由於燃燒室外表面的母線輪廓復雜，手工編制數控加工程序難度大.為了解決數控加工程序的編制問題，研究了斜航線的數學模型，開發了自動編程軟體系統.使用該系統，可以生成多種母線輪廓回轉體外表面上的斜航線數控加工程序.燃燒室收斂-擴張段的母線斜率變化大，加工難度大，是斜航線冷卻通道加工的最典型工件.經過理論分析和實際切削實驗，研究了針對該類型工件的片銑刀直徑選擇、銑削方式和方向、刀具調整和起刀點的設置等多項實際的加工方案.採用上述的一系列技術，已經成功地加工了數十個合格工件.經過兩年多的實際生產過程應用，驗證了所開發的斜航線冷卻通道加工方法的正確性和可行性.這些加工技術的研製成功，對其他相似類型零件的加工亦具有參考意義
  5. W - cu composites prepared from the precipitation w - cu powder have higher sintered density, better mechanical and physical property, more homogeneous and finer microstructure than those prepared from w - cu powder by the balling - reduction method. in chapter 5, a combination of homogeneous precipitation and ball - milling process, namely the mechano - thermochemical process was employed to prepare ultra - fine w - cu powder

    其中，球磨w一cu復合粉（ hp一m ）壓坯在1150下燒結30min后，可獲得相對密度大於99 %的幾乎全緻密的超細晶粒w一cu復合材料， w的顆粒度小於0 . 5林m 。
  6. The two constituents were compatibilized in - situ by mechanochemical reactions induced by pan - milling and the microstructure of the blend can be controlled conveniently by adjusting processing conditions. polyamide 6 / ground limestone powder ( pa6 / caco3 ) and polyamide 6 / silicon dioxide ( pa6 / sio2 ) composites were also prepared through this method. those pa6 blends and composites exhibit improved microstructure and superior mechanical properties to the systems mixed by conventional mixing methods

    研究了磨盤碾磨對尼龍6的粉碎機理，制備了就地增容、微相結構可調的聚丙烯/尼龍6 （ pp / pa6 ）及尼龍6 /碳酸鈣（ pa6 / caco _ 3 ） 、尼龍6 /納米級二氧化硅（ pa6 / nano - sio _ 2 ）共混復合材料，各體系混合效果、微相結構及力學性能均明顯優于採用傳統混合設備制備的試樣。
  7. Abstract : through the structure character of the chain pulley on the plow, this paper discusses the manufacturing principle and the gear - plane shape of the chain pulley when it is milled with cyclinder milling blade. it not only introduces in detail the structure and using method of the chain pulley surface tyre when it milled, but also analyzes gear - shape error which generates in the during milling

    文摘:就刨煤機鏈輪的結構特點論述了用圓柱銑刀銑削鏈輪齒面的加工原理及所形成的齒面形狀，詳細介紹了銑削鏈輪齒面胎具的結構及使用方法，並對加工過程中產生的齒形誤差進行了分析和闡述。
  8. The method to plan the manufacturing path directly from the measurement points is studied. in chapter five, several software modules are realized including copy milling module, cnc code interpreter, and a three - axis copy milling cnc system is developed. in chapter six, the experiment of copy milling and cnc milling is done, and the results of computer simulation and experiment verified the effectiveness of the method

    第六章一方面編制數控加工代碼，在所開發的數控系統上進行數控加工，以驗證數控加工系統的有效性；另一方面，對測量得到的數據，經過仿型系統處理後生成加工路徑，進行仿型加工實驗，以驗證仿型加工演算法和仿型功能實現的有效性。
  9. How to measure exactly the coal mass of pulverizer in fossil power plant ? it is one of primary causes that the efficiency of milling control is low and the automation is difficult to running. in this paper a method of solving uncertainty problem - evidential theory was studied principally from the view of the multiple sensor information fusion

    火電廠中鋼球磨煤機筒內存煤量的測量問題一直是制粉控制效率低和自動控制難以投入運行的主要原因之一，本文從多傳感器信息融合的角度出發，重點研究了一種解決不確定性問題的有力方法? ?證據理論方法。
  10. Test method for colour fastness to alkali milling

    堿性縮絨色牢度的試驗方法
  11. Changing the diameters and fixing angles of milling cutter can meet the machining requirements of helical surface. this method has been applied in the process of manufacturing twin - screw in rubber and plastic mechanics, which simplifies the process route and shortens the prepare time in production and at the same time saves the cost and improves technical and economic benefits

    通過改變圓柱立銑刀的直徑和加工安裝角度來滿足螺旋面的加工要求，該方法已在橡塑機械用同向雙螺桿的加工中得到應用，縮短了加工工藝路線，減少了生產準備時間，節約了加工成本，取得了良好的技術經濟效益。
  12. Practice and study on a new step milling method

    一種新型階梯銑削方法的研究與實踐
  13. The iron covered silicon powder was fabricated separately by the milling method and the mixing method. treated separately at 500, 600, 700, 800, 900 and 1000 for 1 minute, the iron silicon alloy bulk was attained. it also found that the density of the bulk was enhanced by the boost of the treated temperature

    實驗分別採用球磨法和混料法制備鐵硅包覆粉末，採用放電等離子燒結技術分別在500 ， 600 ， 700 ， 800 ， 900 ， 1000保溫一分鐘進行處理，得到鐵硅合金塊體，研究發現，隨著處理溫度的提高，塊體的緻密度隨之增加，顯微結構的分析表明，塊體基本保持了包覆粉末原始自然狀態。
  14. Abstract ： in this paper, the methods including the reduction ball - milling, the optical induction, the chemical reduction, the liquid phase reduction, the liquid - solid phase reduction, the spray pyrolysis, the evaporation and condensation, and the atomization et al. which have been used for preparation of nanometer silver flakes and nanometer spherical silver powders in china since the 1990s were summarized under categories, the features of each method were compared, the development of preparation technology was looked forward to, in the meantime, the present application and potential application of nanometer silver powders were expounded

    摘要：本文分類總結了20世紀90年代以來國內納米片狀銀粉和球形銀粉的制備方法，包括還原球磨法、光誘導法、化學還原法、液相還原法、液-固相還原法、噴霧熱分解法、蒸發冷凝法及霧化法等，比較了各種方法的優缺點，展望了納米銀粉制備技術的發展，同時，論述了納米銀粉現有的和潛在的用途。
  15. With the reference of many relevant materials, the author prepared a fined molybdenum disulfide powder with a average size of 800nm by ball milling, and a nano - copper with average size of 30nm in micromulsion solution method, and synthesized surface - modified titanium dioxide nanoparticles with average size of 40nm in organic media via sol - gel method. the tribological performances of three particles were studied by universal test as well, with the result of fined molybdenum disulfide powder with good reducing wear and antiwear performance at low load, nano - copper with good reducing wear and antiwear performance at high load, surface - modified titanium dioxide nanoparticles maintaining stable reducing wear and antiwear performance from low load to high load due to its characteristics of organic and inorganic nanocomposite. the results indicate that the nanocomposite is the most perspective oil additive. the reducing wear and antiwear mechanism of nano oil additive was studied with in - situ tribochemical principle. nano additives possess broadly developing prospect with its above - mentioned performance

    在參閱了大量文獻的基礎上，分別採用了球磨法、微乳液法、溶膠?凝膠法制備了超細二硫化鉬、納米銅粒子、表面修飾納米二氧化鈦，經原子力顯微鏡測試，獲得的超細二硫化鉬的粒度平均在800nm以內，納米銅粒子平均粒度約為30nm ，表面修飾納米二氧化鈦平均粒度約為40nm ，在萬能摩擦磨損試驗機上測試了三種粒子的摩擦學特性，結果表明：在合理的添加濃度范圍內，超細二硫化鉬在低載時具有優良的減摩抗磨性能，納米銅在高載時具有比較好的減摩抗磨性能，表面修飾二氧化鈦粒子因具有有機與無機復合物的特性，從低載到高載都保持穩定的減摩抗磨性能。
  16. Optimal decision - making method of cutter and depth per cut in rough milling of pocket with islands

    含島型腔粗銑加工中刀具和步長優化決策方法
  17. In the research task supported by the key technologies r & d program in the 9th five - year plan of jiangsu province, the study focuses on the nc milling programming software development method and the corresponding algorithms on the basis of acis. by using the development interfaces provided by acis, the author has made some innovation to tool path generation algorithms. based on acis, a new set operation method of loops is presented in this paper

    藉助acis提供的開發介面實現對一些刀具軌跡生成演算法的創新：提出了一種基於acis的環集合運算方法，該演算法充分利用了acis的功能，使演算法實現過程大大簡化，並提高了演算法效率；設計了一種加工區域識別演算法，該演算法可以識別出由存在復雜嵌套關系的多個型腔環和島嶼環組成的零件幾何模型中的待加工區域；提出了一種實體精加工刀具軌跡生成演算法，該演算法可以自動計算出待加工零件在一個加工方向上所有的刀具軌跡，從而在某些情況下，大大方便數控編程人員完成nc代碼的生成。
  18. The photoinduced method is one of the candidated of substitute for the traditional ball milling method, which has an application prospect

    光誘導法是替代現行球磨法制備片狀銀粉的可選方法之一，具有較大的發展前景。
  19. Abstract : the cylindrical milling method of divided area was proposed to improve the quality and efficiency of integrated impeller

    文摘:為提高整體葉輪的加工質量和效率，提出了分段側銑的方法。
  20. A superalloy double helix integrated impeller with good performances of dimensional precision, microstructure and mechanics was rapidly manufactured by hpdm ( hybrid plasma deposition & milling ) method proposed by author ' s, laboratory, which synthesized plasma deposition as an additive technology, and milling as a subtractive technique during the processing

    摘要採用等離子熔積與銑削復合製造技術，在等離子熔積成形過程中復合銑削精整，試制了難加工高溫合金雙螺旋整體葉輪樣件，其組織性能和力學性能均高於採用傳統工藝加工獲得的葉輪。
分享友人
分享到 Line

分享到臉書