moving cost 中文意思是什麼
moving cost
解釋
搬遷費-
Compared with traditional mechanical and optic gyros, hrg has such advantages as no high speed circumvolving or moving parts in structure, no warm - up time and short start - up time, wide signal band in frequency, low excursion noises, great endurance in over loading, nuclear radiation and short time power off, small bulk, light weight, low power cost and long life, which is suitable for space applications
與傳統的機械陀螺和光學陀螺相比，半球諧振陀螺具有如下優勢:結構上無高速轉子、無活動部件;不需預熱，啟動時間短;信號頻帶寬，漂移噪聲低;能承受大的機動過載;抗核輻射，並可經受短時間電源中斷的影響;體積小，重量輕，功耗低，壽命長，非常適合空間應用。 -
This method decrease the beacon cost to the least, and gets the special distribution of reference positions through controlling the moving route of the beacon, therefore can effectively overcome the beacon sacristy problem
這種方法將錨節點成本減到最少，並且通過對錨節點移動路線的控制實現了參照位置的特殊分佈，可以有效克服錨節點稀疏問題。 -
In this paper, high heat penetration into a moving particulate bed is described mathematically with a comprehensive heat and mass transfer model. the distribution of gas velocity and pressure, the temperature field of gas and solid in the moving particulate bed are examined for different conditions. the results show that thermal penetration into the moving packed - bed particles by fluid flow in porous media is high only in the position near the gas entrance. the thermal penetration thickness tends to increase with the fluid flow velocity and decrease with the particle moving velocity. in the region of thermal penetration, the porosity of solid bed has significant effect on gas field and pressure loss. it is feasible to reduce the gas pressure loss by a larger width / height packed bed in design and operation. the correspondence between thermal infection depth and particle bed height would be helpful to keep high oapacity of reactor and reduce the cost of operation
針對移動顆粒床中物料層內的高溫氣體滲流傳熱現象，考慮滲流與傳熱的相互作用，採用局部非熱平衡假設建立了多孔介質滲流傳熱物理數學模型並進行了數值計算.研究了不同情況下床內填充多孔介質中的流速、氣固溫度和床層壓力損失.計算結果表明，高溫熱氣對移動床顆粒料層的熱滲透主要發生在滲流入口端區域，增大入口滲流速度以及減小床層物料下移速度將導致物料溫度沿床高慢速下降，熱滲透深度擴大，熱滲透作用區域內的物料溫度水平提高.在熱滲透作用區域，孔隙率對流場和壓力損失有很大的影響.研究結果對于移動顆粒床反應器的設計與運行具有一定的參考作用 -
Processing information is dramatically more powerful and cost - effective than moving physical products
處理信息比移動物質產品有效的多並極大地節省成本。 -
Upon above advantage, we can realise that the airboat is very suitalbe for every advertising company and enterprises, low cost, high efficiency, it brings the commercial advertising from the groung to the sky, from the static to moving, from silence to soundable, the shape of streamline is adopted to have very good ability of anti winding, stable flying and agility, it can take off vertically, forwarding or backwarding, presenting a fully new carrier to advertising circles, becoming a focus of people in the world
綜合以上的優點不難看出，遙控飛艇非常的適用於各廣告公司，各種企業購買使用，成本低，見效快，它將商業廣告從地面發展到空中，由靜態變為動態，由無聲變有聲，遙控飛艇採用流線外型，氣動性能好，抗風能力強，飛行平穩，機動靈活，可垂直起落，俯沖爬升，前進後退，空中懸停，拋撒資料，施放彩色煙霧，空中攝影攝像等，向廣告界展示了一個新穎的廣告載體。 -
Income from settlement of projects ： refers to the income recei ved by the construction enterprise / unit from the completed portion of the proje ct through settlement procedures with the contractee during the reference period, and other charges to the contractee as operational costs, such as facility fee, labour insurance premium, moving cost of construction unit, as well as various types of claims to the contractee
工程結算收入：指企業（或單位）按工程的分部分項自行完成的建築產品價值並已與甲方在報告期內辦理結算手續的工程價款收入，以及向甲方收取的除工程價款以外的按規定列作營業收入的各種款項，如臨時設施費、勞動保險費、施工機械調遷費等以及向甲方收取的各種索賠款。 -
And lpmsm using high energy permanent magnet has strong electromagnetism thrust, lower cost, small electrical time constant and rapid response etc. using linear permanent magnet synchronous ac motors as driving parts in gantry - moving type milling machine is first proposed in this paper, to bring their high - speed dynamic response ability into play for further realizing rapid synchronism
因此，本文提出了在龍門移動式鏜銑床同步傳動的驅動元件中採用永磁直線同步電機，以發揮其高速的動態響應能力，快速實現同步。本文提出將解耦控制方法應用於龍門移動式鏜銑床的同步傳動中。 -
We have developed the products after integrating the advantages and shortcomings of various technology and practical application, which completely solve such identification problems as long - distance, big flow, anti - jamming, lowest power consumption and objectives of fast moving and reduces the cost
綜合了各產品技術的優缺點以及實際運用后推出此產品，徹底解決了遠距離、大流量、抗干擾、超底功耗、高速移動的標識物的識別難題，而且成本較以往大大降低。 -
E3d r - tree takes into account the features of moving object data and takes advantage of new cost parameters. in particular, least - cost - first search algorithm is used in the insertion algorithm to find the overall best way to insert a new record in e3d r - tree. the proof of the vidility of the algorithm is given
在e3dr - tree中，結合移動對象數據特徵引入空白區域作為新的插入代價參數，同時，在插入演算法中利用最小代價優先搜索演算法確定全局最優插入路徑，並給出演算法正確性證明。 -
The rising cost of paying engineers in bangalore has prompted at least one silicon valley start - up to save money by closing its indian engineering centreand moving the jobs back tocalifornia
由於印度班加羅爾工程師的薪資成本不斷上升，已促使至少一家矽谷初創企業關閉其印度工程中心，將有關崗位移回加州，以求節省資金。 -
With the development of computer technology and modeling technology, the numerical control simulation technology has become a kind of effective method of foreseeing machining process performance, product quality and processing efficiency in the present production machining. it not only could inspect the rationality and correctness of nc program as a result it avoids the breakdown of nc equipment because of knife moving by error but also reduced the consumption and cost that test cutting brought before and shortened the development period of new product greatly
在現代生產加工中，伴隨著計算機技術與建模技術的發展，數控模擬技術已成為能夠預測加工過程表現、產品質量及加工效率的一種有效方法，不但可以檢驗數控程序的正確性和合理性，避免由於機床走刀錯誤造成的數控設備損壞的危險，而且大大降低了以往採用工藝試切方法所帶來的高消耗和高成本，大大縮短了新產品的開發周期。 -
Mainly for the engraving of anti - counterfeiting signs for the packages of tobacco alcohol sugar tea cosmetics and various other high - quality products. the machine can work quickly and in an allembly line at a low cost. the highest speed of engraving is 300mm s. and the marimum moving speed is 5 - 300cm min adjutable. the differentiation rate is 0. 0125mm and is under the control of high - speed one - chip cpu
本機噴碼速度快，可上流水線生產，價位低，品質高，最大雕刻速度300 s ，最大移動速度5 - 300cm mm可調，解析度為0 . 0125mm ，高速單片機控制。 -
The main factors to affect oil supply includes : opec ' s producing capacity and its production quota policy, oil stock, world oil production cost, politics and military factors, etc ; while the factors to influence oil demand is the world economic growth rate, the substitution energy, season changes, the speculation in the future stock market, etc. meanwhile the article has analyzed the price - decision model with the opec in the world oil market by the way of economic theory, disclosed respectively the different reason for the world oil price ' s slump in 1998 and the price ' s sudden and sharp rise in 1999, moreover it has made an detailed analysis and anticipation with the world oil price moving tendency in 2002
對國際石油市場影響因素進行了分析，影響油價的供給因素主要有： opec的產能及其配產政策、石油庫存、世界石油生產成本和以政治、軍事等；影響油價的需求因素主要有：世界經濟增長、替代能源、季節性、期貨市場上投機行為等；並用經濟學的觀點對opec卡特爾組織在國際石油市場上的定價模型進行了分析，分別分析了1998年國際原油價格暴跌和1999年國際原油價格暴漲的原因，對2002年的國際原油市場的走勢進行了分析和預測。 -
The reasons leading to the family educational expenditure to increase fast include : external reasons such as the educational expenses sharing mechanism not perfect, the educational center moving on, the scale and structure of supplied education not to meet the educational demand, the educational cost rising and claim for charge at random to education ; inherent reasons, such as strong demand for education of and the family, etc.
造成家庭教育支出快速增長的原因包括：教育費用分擔機制不完善，教育重心上移，教育供給的規模和結構不適應教育需求，教育成本上升和教育亂收費的普遍存在等外部原因，以及家庭對教育的強烈需求等內在原因。家庭教育支出增長對家庭消費產生了重大影響。 -
Yang and xie 9 developed a numeri - cal model for the moving boundary problem through reducing it to a fixed boundary problem by a coordi - nate transformation. it is necessary to reduce the a subsurface runoff parameterization with water storage and recharge based on the boussinesq - storage equation 623 computational cost of the groundwater model so that it can be applied to a land surface model for climate studies
文獻9通過一個坐標變換將運動邊界問題轉化為一個固定邊界問題，進一步改進了該土壤水模型的數值計算方法，使其減少計算量，達到能在一般通用的模式中實際應用 -
Regarding of the moving continuity and the small change of object ' s features in frames, a kind of cost function is put forward in the tracking and counting algorithm, which is applied in the tracking match of the image
跟蹤計數是本演算法的一個難點。根據該類多目標在相鄰幀間運動具有連續性，並且包圍窗口變化不大的特點，本跟蹤計數演算法改進了一種代價函數，應用於圖像跟蹤的匹配過程中。 -
But the traditional static design method is based on statics and seldom contains guidelines for incorporating the dynamic behavior of the moving belt. large safety factors are employed to accommodate most dynamic stresses in the belt. this can not only increase total cost but also give rise to system instability and higher dynamic stresses that can damage the belt, drums, idlers, bearings and other parts of the conveyor
在高速情況下，帶式輸送機存在的主要問題之一是起制動過程中輸送帶的動張力問題，而傳統的靜態設計方法將輸送帶視作剛體，並且在靜力學基礎上按靜止或勻速運行狀態對輸送機系統進行受力分析和參數設計，將動張力以一定系數計入，用加大安全系數方法提高設計可靠性，這不僅會使帶式輸送機的成本提高，還可能引發起制動過程中較大的輸送帶動應力及運行過程中的不穩定性，從而導致輸送帶接頭的失效及滾筒、托輥、軸承乃至其它部件的損壞。 -
Enlargement already conjures up scary images for many : factories being moved east in search of low - cost labour, cheap workers ( “ polish plumbers ” ) moving west, gripes about new members being too pro - american and too quick to provoke russia
歐盟的擴大已經引起許多人頭腦中恐懼的想像：工廠會搬到東歐以尋求低成本，而廉價的勞動力（ 「波蘭管子工」 ）則流向西歐，抱怨新成員過于親美以及過快的激怒俄羅斯。 -
This study attempts to explore what kind of households would make mobility decision since the households must pay higher moving cost instead of staying at their existing houses
摘要本文有兩個主要目的：首先是加入生命周期的因素，分析家戶的遷移決策。 -
Refers to the income received by the construction enterprise from the contracted project through settlement procedures, and other charges to the contractores as operational costs in addition to the value of the project, such temporary facility fee, labour insurance premium, moving cost of construction equipment, as well as various types of claims to the contracte
指企業承包工程實現的工程價款結算收入，以及向發包單位收取的除工程價款以外的按規定列作營業收入和各種款項，如臨時設施費、勞動保險費、施工機械調遷費等以及向發包單位收取的各種索賠款。
分享友人