piston area 中文意思是什麼
piston area
解釋
活塞面積-
In accordance with the surface area of the piston, the force acting on it is transferred to the hydraulic fluid and from there via the connecting tube to the measuring instrument
根據活塞的表面積，作用在活塞上的力傳遞到液壓油，然後從那裡通過連接管到達測量儀器。 -
In accordance with the surface area of the piston the force acting on it is transferred to the hydraulic fluid and from there via the connecting tube to the measuring instrument
根據活塞的表面積的大小，作用在活塞上的力轉移到液壓油，然後從那裡通過連接管到達測量儀器。 -
The result show that the piston area and the accumulator volume have more influence on the system ' s performance, and the piston stroke and the oil elastic modulus have small influence on it
結果表明，活塞面積和蓄能器體積對系統性能影響比較大，而活塞最大行程和油液彈性模量對系統性能影響較小。 -
Taking a five - story frame structure as an example, the influence of the piston area, piston stroke, accumulator volume and oil elastic modulus on the systems control effect and energy transition efficiency are discussed in detail
詳細討論了四個主要參數的變化對振動控制效果和換能效果的影響，這些參數包括隔震換能系統的活塞面積，活塞最大行程，蓄能器體積和油液彈勝模量等。 -
Designning well tube and drill - hole diameter in order to increase thickness of both annular packing gravel and water - resisting clay, nylon net packing around well tube filters, designing filter layer on the boundary between packing gravel and water - resisting clay and ramming the gravel by working the piston into the well after gravel packing completion and the filling clay for salt - water resisting etc. we succeeded in constructing 3 drinking - water wells in minqin county, proved the affectivity and feasibility of using it and giving a certain technical demonstration of construction of drinking - water well in the same similar to this area
通過孔徑與管徑的調配設計，增大環狀粒料層和止水粘土層的厚度；濾水管外包尼龍紗網；粒料與止水粘土接觸界面上設計反濾層；填粒后先行拉活塞利用水力夯實粒料層，再投粘土球止掉上部鹹水等措施，在民勤縣三口人飲水井施工中取得顯著效果，證明了該套成井工藝的有效性和可行性，有望為同類地區人飲水井施工提供技術示範作用。 -
Complete air piston pump contains pneumatic motor and piston pump, the ratio of piston area of pneumatic motor and plunger ' s sectional area of piston pump is transforming times of pump pressure ; the higher times, the more pressure can deliver higher viscosity fluid, and achieve the delivery aim
完整的氣動柱塞泵包含有氣動馬達與柱塞泵兩部分，氣動馬達中的活塞面積與柱塞泵活塞的截面積比值，就是泵壓力轉換的倍數；愈高的倍數就能以愈大的壓力輸送愈高黏度的流體，達到輸送的目標。 -
Many researches have been done with the simulation model. it was found that some structure parameters such as the diameter of the driving piston, the diameter of the buffer piston, the stiffness of the valve spring, the compress ratio of the buffer piston, and the flux area of the solenoid valve etc. have great effect on the performance of the haecvvs. for certain performance demand of the variable vale system, there is a most suitable combination for the structure parameters
通過對電控可變氣門系統的主要結構參數，如動力活塞直徑、緩沖活塞直徑、氣門彈簧剛度、緩沖活塞實際壓縮比、電磁閥通流面積等參中壓共軌電控柴油機可變氣門系統的研究數對電控可變氣門系統啟、閉特性的影響規律的研究發現，動力活塞直徑、氣門彈簧剛度、電磁閥通流面積對電控可變氣門系統啟、閉性能起著決定性的作用，對於一定的氣門啟閉規律要求，這些結構參數存在一組最佳值。 -
This thesis analyze the effects of its mechanism dimension to the working properties with many of date, and the flux curve of principal and subordinate piston mortar pump, and the effects of the transition working area of the compensatory cylinder to the working properties, and find the differences between the actual properties and the theoretical model, proposes the measures for the improvements, as well as gives the guiding instructions for the mortar pump design
數據分析了主從活塞式砂漿泵機構尺寸參數變化對泵工作性能的影響，分析了主從活塞式砂漿泵的排量曲線，以及補償缸工作的過渡區間對泵工作性能的影響，找到了泵實際工作性能與理論模型的差別並提出改善措施，對該砂漿泵的設計提出指導性建議。 -
When the governing valve was series - connected on the return oil - line in the metering - out control system, under the same flow area and the same adjusted pressure of relief valve, with the incremental quantity of step load, the pressure highly - adjusted capacity of the hydraulic cylinder chamber with piston - rod increased, meanwhile, it ' s time of rise, time to peak and the governing time all increased. at the same time, the pressure highly - adjusted capacity of the hydraulic cylinder chamber without piston - rod increased
當出口節流調速系統的回油路上串接調速閥時，隨階躍負載的增加，在相同流量閥開度、相同溢流閥調節壓力的情況下，液壓缸有桿腔壓力p _ 2 （ t ）的超調量是增加的，上升時間、峰值時間以及調整時間也是增加的；液壓缸無桿腔壓力p _ 1 （ t ）的超調量是增加的。 -
Using gap elements to simulate the practical worki n g situation of a piston, a new finite element contact model is proposed both th e stress and deformation of the piston and the pressure distribution between the p iston and the pin are obtained the contact area and the pressure distribution v ary with the stiffness of the pin and the clearance between the piston and the p in
該文使用間隙元模擬活塞的實際工作狀態，提出活塞的有限元接觸模型，不僅可以得到活塞的應力和變形，還可以計算出活塞與活塞銷之間的壓力分佈以及銷的剛度、銷與銷座的間隙變化對接觸區域的大小和壓力分佈的影響 -
Abstract : using gap elements to simulate the practical worki n g situation of a piston, a new finite element contact model is proposed both th e stress and deformation of the piston and the pressure distribution between the p iston and the pin are obtained the contact area and the pressure distribution v ary with the stiffness of the pin and the clearance between the piston and the p in
文摘:該文使用間隙元模擬活塞的實際工作狀態，提出活塞的有限元接觸模型，不僅可以得到活塞的應力和變形，還可以計算出活塞與活塞銷之間的壓力分佈以及銷的剛度、銷與銷座的間隙變化對接觸區域的大小和壓力分佈的影響 -
On november 22 three members of the indiana pacers basketball team charged into the spectator area at an athletic facility in suburban detroit and attacked several detroit piston fans
11月22日，在美國底特律市郊區的一個體育館，印第安娜步行者隊的三名隊員沖進觀眾席打了底特律活塞隊的幾個球迷。 -
While removing a briquette using a recently installed pneumatic system, the operator put the system into motion while at the same time holding the area where the piston is located
使用新近安裝的壓縮空氣制動系統移動鋁塊的時候，該操作員將系統啟動，同時抓住了這一區域。 -
Anqing diamond dmd piston ring joint co., ltd., is located in qianshan industry district of anqing city, anhui province, china, with an area of 18, 000 square meters, and built on modern gardens standards
中外合資安慶帝邁德dmd活塞環製造有限公司，由公司總部組合油環分廠毛坯鑄造分廠和安慶市精加工分廠組成。總部座落於安徽省安慶市潛山工業開發區。 -
Accorded to the experimental research, under different flow area of flow valve and different adjusted pressure of relief valve, conclusion that the regulation of the pressure p1, p2 in the two cylinder chambers varied with the change of step load were as follows : when the throttle valve was series - connected on the return oil - line in the metering - out control system, under the same flow area and the same adjusted pressure of relief valve, with the incremental quantity of step load, the pressure highly - adjusted capacity of the hydraulic cylinder chamber with piston - rod decreased, meanwhile, it ' s time of rise, time to peak and the governing time all decreased. while the pressure highly - adjusted capacity of the hydraulic cylinder chamber without piston - rod increased
通過試驗研究得出系統在不同的流量閥開度、不同溢流閥調節壓力（進口壓力）下，液壓缸兩腔壓力p _ 1 、 p _ 2隨階躍負載變化的規律：當出口節流調速系統的回油路上串接節流閥時，隨階躍負載的增加，在相同流量閥開度、相同溢流閥調節壓力的情況下，液壓缸有桿腔壓力p _ 2 （ t ）的超調量是減小的，上升時間、峰值時間以及調整時間也是減小的；液壓缸無桿腔壓力p _ 1 （ t ）的超調量是增加的。 -
The friction effect between piston and wall of the cylinder is reduced by a compensating strategy on dead - area
集礦頭上升和下降兩個方向的動態特性不一致，而且電液比例閥存在動作死區。 -
This dissertation has presented a new method on the measuring and checking procedures of the dynamic unbalance of the motorcycle crank and made a deep research on its measuring device. what have been done is as follows : firstly, the dissertation has thoroughly discussed the basic theory of rotor unbalance such as its varieties ， characters and rules of the movement which is under the excitation of the inertial force and inertial moment induced by the unbalance mass. it also has deeply expounded the dynamic mechanics of the specially formed components ? crank, especially in the area of the crank integrated with shaft and piston
本論文針對摩托車發動機曲柄連桿機構為研究對象，對曲柄連桿機構動平衡的測試提出了一種新方法，並對其數字化測試裝置進行了深入研究，完成的主要工作及取得的成果如下：首先，對動平衡理論進行了詳細的探討，論述了不平衡產生的原因，不平衡種類及轉子在不平衡量產生的慣性力激勵下的運動規律，並對曲軸這一結構特殊的剛性轉子的平衡理論進行了闡述，重點研究了曲柄連桿機構這一往復式機械構件的力學特性。 -
( 2 ) in the original system because of the area between the piston and the piston pole is too small, the system pressure will rise when in the return stroke. and the reliever valve will open. the return velocity will reduce
（ 2 ）原設計中，由於活塞和活塞桿的面積差很小，回程上行時，系統壓力會迅速升高造成溢流閥的溢流而使回程速度降低，從而降低了系統的工作效率。 -
The piston is forced upward until sufficient port area is available to pass the fluid.
活塞被推動向上，直到有足夠的通道面積讓流體流過。
分享友人