pressure probe 中文意思是什麼
pressure probe
解釋
壓力傳感器-
Probe into the construction of the underwater collar beam of the high - pressure jet grouting pile
高壓旋噴樁施工水下系梁的探討 -
This paper researches on a novel method to measure three - dimensional sound intensity use for failure diagnosis of electro - hydraulic system and the fabrication of a miniature three - dimensional sound intensity probe by using two separate micro - machined pressure probes and one microphone frame
本文研究了聲強測量技術在汽車噪聲源識別中的應用。通過使用兩個微型雙麥克風和支撐它們的框架，我們設計了一個小型的聲強探測器，用它來實現對汽車噪聲源的聲強探測。 -
The main work and achierement are as following : ( 1 ) by using shock impedance matching technique and electric probe method, 5 shots of impact experiments were conducted to measure the hugoniot equation of state for enstatite ( mg0. 92, fe0. 08 ) sio3 with the average initial density 3. 05g / m3 from shock pressure 50 gpa to 115gpa, using two stage light gas gun
本文研究取得的認識主要有以下幾點： （ 1 ）用阻抗匹配法和電探針技術在80 115gpa壓力范圍內對平均初始密度為3 . 05g / cm ~ 3的頑火輝石樣品進行了5發hugoniot狀態實驗測量。 -
The seven - hole probe ( shp ) is a device which can simultaneously measure the pressure and velocities of the steady flow, especially at large angles
作為一種可以同時獲得流動速度的大小、方向、以及總壓和靜壓的氣動測量裝置，七孔探針能夠被廣泛應用於各種大角度的流動測量。 -
But now there hasn ’ t any measure system for seven - hole probe which can integrate pressure data acquisition and data processing together. so it costs much time to complete the shp calibration and the probe use
但是目前七孔探針作為流場測試裝置並沒有相應的測試系統與之配套，數據的採集與處理並沒有一體化，所以七孔探針校準和使用繁瑣耗時。 -
Probe into the sidewall pressure of the freezing well
凍結井井幫壓力探討 -
This paper studies the application of inductively coupled plasma ( icp ) technology to the etching compound semiconductor insb - in film. by means of single probe and double probe, the ion density and electron temperature of chamber ( 30mm and 50mm in height respectively ) under varied process condition were diagnosed. the spatial distribution of the axial position of the two parameters and the varied curve that the two parameters varies with the power and air pressure are obtained
利用單探針和雙探針診斷30mm高反應室和50mm高反應室在各種工藝條件下的離子密度和電子溫度，得到這兩個參數在反應室軸向位置的空間分佈、隨功率和氣壓的變化曲線、頂蓋接地和反應室體積對它們的影響，結果表明離子密度為10 ~ 8 10 ~ （ 10 ） cm ~ （ - 3 ） ，電子溫度在4 10ev之間；當頂蓋接地時，該處的等離子體密度明顯大於不接地；在同樣條件下， 50mm高反應室內的離子密度明顯大於30mm高反應室。 -
This paper mainly study on the technics of preparing nano - si3n4 and icpecvd. seeking for the proper parameter and technics, crystallization of nano - si3n4 powder with muffle furnace, probe the new effective way of improving the properties of nano - si3n4 powder the ion density in the reaction chamber was diagnosed by a langmuir probe. the rules were obtained under different air pressure, different radio frequency power and different position which the ion density changes about from 1010cm - 3 to 1010cm - 3 decreasing as the pressure increases and increasing as the power decreases
利用朗繆爾探針診斷了反應室內等離子體參數，得到不同位置、不同功率和不同氣壓下等離子體密度的變化規律，結果表明離子密度為10 ~ 8 10 ~ （ 10 ） cm ~ （ - 3 ） ，等離子體密度隨著功率的增大而增大，隨著氣壓的升高而減小，由於離子鞘層的存在，在一定條件下提供了局部等離子體密度穩定的區域。 -
Air pressure probe
空氣壓力傳感器 -
Probe into piling in static - pressure phc pipe pile construction
管樁靜壓施工的送樁問題探討 -
The eddy current ring of pressure pipeline that is detected by spot probe is studied firstly in theory
摘要首先從理論上分析了放置式探頭探測壓力管道時的渦流環模型，然後應用此模型推導出了檢測時的特徵頻率計算公式。 -
According to the experimental parameters of mpt, the main performance parameters of different propellants have been given by engineering performance computation under designed and working states, which has great importance for the experimental research and the future work. 2. for helium and argon, the factors which influence on mpt ' s vacuum steady work have been discussed such as the material of microwave tie - in, the distance between the probe and inner - conductor, the position of the inner - conductor, the input power of microwave, the mass flowrate of propellant and the vacuum pressure of environment, and the influence has been discussed of the microwave power and the mass flowrate of propellant on the pressure of the resonance cavity, thrust, reflected power and the temperature of the resonance cavity
論文的工作和新見解主要包括： 1在設計狀態和工作狀態下，根據mpt的實驗參數，對mpt使用不同工質時的性能進行了工程估算，這對mpt現階段的實驗研究和今後的研究有重要的指導意義； 2對于he 、 ar推進工質，討論微波的接頭材料、探針與內導體的間隙、內導體的位置、微波的輸入功率、工質的質量流量以及環境真空度對mpt真空啟動和穩定工作的影響，並探討微波的輸入功率、工質的質量流量對諧振腔壓強、推力、反射功率以及諧振腔溫度的影響； 3對于n _ 2 、 h _ 2 、 nh _ 3 、 h _ 2o推進工質，主要討論與he 、 ar工質不同的特性，並從長遠的眼光和工程應用的角度，認為其可行性不容置疑，潛在優勢不可忽略，是未來mpt應用的主流推進工質。 -
In order to execute this research, the experimental equipment that can fulfill the requirements of the regions of reynolds numbers in mte was built. two new measurement techniques, mini - size static pressure hole and mini - type pressure probe were presented
本文針對微型渦輪發動機流動問題研究的需要，發展了壁面微靜壓孔和微型單管總壓探針測量技術。 -
The difference among the elasticity modulus of various microstructures is probably the main reason, which caused the experiment results above. under the same experiment conditions, such as sample shape, size, surface roughness, establishment of testing system, pressure on the probe, and thickness of coupling medium, the variety of relative attenuation coefficient ( or ) in different heat treatment samples is measured and compared by measuring the attenuation obtained from the cylindrical surface of column. the result is as following : for 40cr and 38crmoal, a mt < az mq < a s < a p + f ; for gcrlssimn, a mt < a annea < s < a p + f ; and a increased with the increasing of frequency
在保證試樣形狀、尺寸、表面光潔度、系統參數設置、施加在探頭上的壓力以及耦合層厚度等測試條件一致的情況下，利用棒材圓柱面測衰減系數法，分別測定並比較上述不同熱處理試樣相對衰減系數的變化情況，得到的實驗結果是：對於40cr及38crmoal鋼， _ （低溫回火） （淬火） _ （高溫回火） _ （正火） ；對于gcr15simn鋼， _ （低溫回火） _ （退火） _ （高溫回火） _ （正火） ；且隨著頻率的提高，衰減系數均呈現增加的趨勢。 -
Ear pressure probe
耳用壓力探針 -
Probe into earth pressure calculation and structure optimization of pile - anchor support for deep foundation pit
深基坑樁錨支護土壓力計算及結構優化探討 -
Through studying the cptu chamber test with the soil as a medium in door, according to the stress which generated in the course of probe penetrating, include axial additional stress and radial additional stress, measured by subminiature pressure cells which buried in the soil. this paper analyzed the rule of variation of axial and radial additional stresses, and compared with each other
摘要通過以粘土為介質的孔壓靜探（ cptu ）模型槽試驗研究，根據埋置在土中的微型土壓力盒在貫入過程中所則到的土應力（軸向附加應力和徑向附加應力） ，分別分析了軸向和徑向附加應力的變化規律，並進行了比較。 -
Throughout the descent, shifts in the frequency of the probe ' s radio signal will be monitored to infer the strength of titan ' s winds, and the huygens atmospheric structure instrument ( hasi ) will measure temperature, pressure and electrical fields that could indicate the presence of lightning
下降過程中將持續監測探測器無線電訊號的頻移，以推算土衛六風場強度；而惠更斯大氣結構儀（ hasi ）會量測溫度、氣壓以及可能顯示閃電是否存在的電場。 -
Road vehicles - crankcase pressure measurement procedure using a pressure probe
道路車輛.使用壓力探測器的曲柄軸箱壓力測量程序 -
There is a pressure probe at a measurement location a distance l upstream of the blade row
距葉柵上游長度為l處有一個壓力探測器。
分享友人