static control system 中文意思是什麼

static control system 解釋
靜電防護系統
  • static : adj 1 靜止的,靜態的,靜力的。2 【物理學】天電的,靜電的。3 【無線電】靜態特性。4 固定的,不活潑...
  • control : n 1 支配,管理,管制,統制,控制;監督。2 抑制(力);壓制,節制,拘束;【農業】防治。3 檢查;核...
  • system : n 1 體系,系統;分類法;組織;設備,裝置。2 方式;方法;作業方法。3 制度;主義。4 次序,規律。5 ...
  1. Finally, the controller working based on the combination of rbf neural networks and traditional pid control was applied to in aclinic kinetic machinery and lifting machinery of tower crane. the simulation of this controller was made using matlab, and the simulation results showed that the control system has some merits, such as quick response, little overshoot, well anti - jamming capacity, and little steady - state error, etc. both the dynamic property and static characteristic of this controller are better than traditional pid controller, and meet the tower crane

    應用matlab對塔機的變幅和起升機構的運動控制進行模擬,模擬結果表明基於rbf神經網路整定pid的控制系統具有響應快、超調小及穩態誤差小等優點,其動、靜態性能優于單一pid控制,從而提高了塔式起重機工作機構的工作性能。
  2. Control system design of bogie static test bench

    分散式控制系統的實現
  3. The simulation results show the mras - based field oriented control system has good static and dynamic performance

    對系統的模擬實驗表明,基於模型參考自適應系統的矢量控制系統具有較好的靜態和動態性能。
  4. 3. alloy guide roll in static balance, seled type oven, fast drying with less energy consuming, and auto constant tem perature control system

    3靜平衡鋁合金導輥,密閉式烘箱,節能快乾,自動恆溫控制系統
  5. 3. alloy guide roll in static balane, sealed type oven, fast drying with less energy consuming, and auto constant temperature control system

    3靜平平衡鋁合金導輥,密閉式烘箱,節能快乾,自動恆溫控制系統。
  6. Design of control system of static inclining test table

    靜態傾斜試驗臺控制系統設計
  7. According to the request of the standard in electric industry in china named " on line check and test rules of analog and digital control system of power station ", every system is tested, and according to technological guides and operation rules, static and dynamic trial are required to be done, the quality of adjust, and response time also adapt to the requirement

    機組整套試運以後,各控制系統逐步投入。依據中華人民共和國電力行業標準《火力發電廠模擬量、開關量控制系統在線驗收測試規程》的要求進行測試,並按照技術指標及運行導則要求均做過靜態、動態特性試驗,調節品質、響應時間均符合要求。
  8. And so on, the mathematical model and transfer function of the tracking system are built, and the feasibility of the tracking control system design is demonstrated. furthermore, the static error of the system with a unit incline input is deduced. a majority of model of unit is based on analytics, so the general model can apply to other optical intersatellite communications systems

    在此基礎上,將atp跟蹤控制子系統視為線性定常系統,通過解析法和實驗法對子系統的各個控制環節的單元器件進行合理建模,得出整個環路總的開環及閉環傳遞函數,論證了本課題所設計的atp跟蹤控制環路的可行性及其視軸輸入為斜坡信號時的理論穩態誤差。
  9. So the study of static inverter digital control has practical significance, and this paper aims at the digital - control system design for static inverter

    因此,研究靜止變流器的數字控制技術更是具有重要意義。
  10. - the focal point of this paper is studying the problem of cargoes ? weight measurement, besides the component of mechanical system, the component and control of electric - control system, the full - digital dc speed adjustment system and the hardware and software design of plc control system. this paper puts forward the project of current static measurement method and corrects it with acceleration dynamic measurement

    本文除分析介紹了集裝箱橋吊的機械繫統組成、電控系統的組成及控制、全數字直流調速器以及plc控制系統的軟硬體設計外,重點研究了集裝箱裝卸橋中的貨物稱重問題,提出了應用電流靜態測量法的稱重方案,並且採用了加速度動態測量法對其進行動態校正,在實際應用中取得了令人滿意的效果。
  11. A fuzzy control system of stepping motor for seam tracking is presented in this paper, the proposed system can realize the self - modify ing of the parameters and improve the characteristics of dynamic and static state of stepping driving system according to the error of seam tracking. the accuracy of seam tracking is enhanced obvi ously

    介紹一種用於焊縫跟蹤的步進電機模糊控制系統,該系統可根據跟蹤偏差進行參數自調整,改善了步進驅動系統的動靜態特性,提高了焊縫跟蹤精度。
  12. The paper explains the control force with the center of performance index. the static error is an important index of the control system

    穩態誤差是控制系統一個很重要的性能指標,在九點控制器中k _ 0是穩態時的控製作用。
  13. The pid control of output voltage feedback is easy to give attention to static and dynamic performance of the control system. output performance of inverter of ups is improved when rms of output voltage feedback is added to pid control system. the hardware and software is designed in order to achieve the digital pid control of inverter of ups

    設計了用於逆變器數字化控制的采樣調理電路,結合tms320f240的硬體資源,通過軟體實現了ups系統的緩起動和市電跟蹤,並改進了逆變器電壓瞬時值控制,通過引入輸出電流中心值檢測,對反饋電壓進行補償,解決了逆變器輸出的偏磁問題。
  14. This text introduces the characteristic concept of turbine control system from two traditional aspects of static and dynamic state, and the characteristics of reheating system and the power - frequency electric liquid control system, and analyzes the difference from the simulated electric control system to digital electric system. this text describes the constitute of deh system from three aspects and analyzes the reliability of deh system

    本文從傳統的汽輪機靜態特性和動態特性兩個方面講述了汽輪機調節特性的概念,以及中間再熱式汽輪機調節特性、功率? ?頻率電液調節系統的特點。以陽泉二電廠deh系統為例,從硬體、軟體和控制功能群三部分敘述分析了deh的組成和各部分作用,並對deh系統的可靠性進行了分析。
  15. It analyses the causes to bright image movement, studies principle to compensate image movement, conforms project to compensate image movement, and designs framework to compensate image movement in the article ; to analyze and design configuration of the scanning mirror, to select matters of mirror and its support structures on the principle of consistent line expansion coefficient ; to ascertain type of moment electromotor by most rotating angle speed and most rotating moment which are required by loads in the period to take pictures, as well as by figuration size of electromotor ; to design retarder according as the electromotor parameters ; to design and optimize lightweighted mirror shapes, because the mirror is key part ; to design flexure support structure, to analyze static and dynamic characteristics of the support structure by name of patran program for validating desig n rationality ; to study function of the scanning mirror electric control system ; to test precision of the system, the results indicate the rationality of design of the scanning mirror system

    本文通過分析像移產生原因、研究像移補償原理,確定像移補償方案,並根據像移補償原理設計補償機構;分析與設計掃描反射鏡系統結構,根據材料線膨脹系數一致原則,選擇反射鏡及其背部支撐的材料;由掃描反射鏡在擺掃周期內的最大擺掃角速度確定力矩電機的額定轉速,根據負載力矩確定電機的額定轉距,綜合電機外型尺寸等因素,確定執行元件? ?電機的型號;根據所選電機的參數指標,設計1 : 6速比的減速器;利用patran軟體對掃描反射鏡系統中的關鍵件? ?反射鏡進行輕量化設計與優化;設計反射鏡柔性支撐結構,並通過軟體分析支撐結構的力學特性,驗證反射鏡柔性支撐結構設計的合理性;從原理上研究掃描反射鏡控制系統功能;進行系統精度測試,測試結果表明掃描反射鏡系統設計的合理性。
  16. After introduced its task and construct of the controller of the homing gliding missile, the longitudinal and lateral motion equations are provided. a continuous fuzzy - pid control system combined the advantages of fuzzy control and pid control is presented, and could be guaranteed the stability of the system using popov stability criterion. the results of simulation show that the fuzzy - pid control is able to provide a better relative stability and robustness, also have better dynamic and static characteristics than the pure pid control

    將模糊控制和pid控制相結合,研究了一種基於模糊pid的連續控制器,利用波波夫穩定判據判定該控制器是漸進穩定的,並將其應用於制導滑翔彈俯仰角、偏航角、滾轉角穩定迴路中,設計模擬結果表明,該種連續控制器可使系統獲得很好的穩定性和魯棒性,動、靜態性能比單純pid控制都有較大提高。
  17. In order to the requirement of the full - bridge shift - phase control it designs the pwm wave engender which bases on epld. the pwm wave engender improves the static precision and dynamic speed of the whole control system

    為滿足單相全橋移相逆變器的軟開關工作條件,本文重點開發研究了由epld構成的pwm波形發生器,使得整個控制系統的控制精度和動態響應速度大大提高。
  18. Fuzzy inference system ( fis ) module, control system module and simulink module are used in the simulation of mrfac system and a set of lest and best control rules are found by " error trial ". it proves that high precision control is realized and the hydraulic mrfac system can achieve dynamic and static performance in this paper

    本文就是利用matlab軟體中的模糊推理系統工具箱、控制系統工具箱和simulink工具箱對液壓伺服模型參考模糊自適應控制系統進行模擬,用「試錯法」找出一組數目最少且能夠實現最優控制的條件語句,使系統的動穩態性能得到了大大地提高,基本上實現了超調小,響應速度快地實時控制。
  19. Based on the motor ' s mathematics models of the two control technologies in the stator static coordinate system, we build mathematics model of compound driven technology

    根據兩種控制系統電機本體在定子三相靜止坐標系( a , b , c )下的數學模型,建立復合驅動的數學模型。
  20. By means of variable frequency and adjustable speed, the variable air volume air conditioning automatic control system saves energy through setting different static pressure values in different time periods

    變風量空調控制系統以變頻調速為手段,分時段設定靜壓值以實現節能。
分享友人