step velocity 中文意思是什麼
step velocity
解釋
級速度-
According to the system technology require, adopting singlechip realize open loop digital control of hdclsm ; using v / f conversion and complex key - control method realize digital setting of system parameter, such as velocity ; using micro - stepping control insure the motor running more smoothly ; adopting debasing speed control method to eliminate the mechanical impact of distance termination effectively ; at the same time, analyzing main power circuits drive circuit and protect circuit of system, completing hardware design and facture and software programming and debugging ; at last, making a whole test in hybrid rotary step motor. the experiment result indicates that this control system reaches the qualities required and run smoothly also
根據系統技術要求，採用單片機實現了混合式直流直線步進電動機的開環數字控制；利用v f變換和復合鍵控方法實現了系統轉速等參數的數字設定；利用細分控制技術保證了電機運行的平穩性，並進行了波形分析和理論研究；採用單片機軟體降速控制策略解決直線步進電機行程末端的機械沖擊問題；同時對主功率電路、驅動電路和系統保護電路進行了分析，完成了硬體設計、製作和軟體編程、調試，最後在混合式旋轉步進電動機上進行了全面測試。 -
The additional flow is formed by the device of dentoid baffle, and the application of the device of dentoid baffle cooperated with a stilling basin has been investigated by systematic model tests. based on the research results, the hydraulic problems such as the characteristics of hydrodynamic pressure and cavitation on the head of the denotid baffle, the properties of flow under the condition that the device of denotid baffle is used with a stilling basin, the hydraulic computation about a stilling basin, the estimation of energy dissipation and its various affection factors, the mechanism and effect of energy dissipation, and distributions of velocity and pressure and aerating concentration, etc, have been analyzed ; the method and step of hydraulic design of device of denotid baffle by which the additional flow is produced has also been proposed
文中利用齒墩設施實現附加射流，對齒墩設施與消力池聯合應用進行了大量的和系統的模型試驗，分析研究了中低佛勞德數條件下，齒墩墩頭的動水壓強及空化特性，齒墩設施與消力池聯合應用時的流態特性，消力池的水力計算，消能量的估算及其各種影響因素，消能機理和效果，消力池內的流速、壓強特性，摻氣濃度分佈等水力學問題，並提出了實現附加射流齒墩設施的水力設計方法和步驟。 -
The typical velocity field and the pressure on the step surface of the stepped spillway are measured using the laser doppler anemometer and the piezometer tube respectively
採用多普勒激光測速儀和測壓管分別對階梯溢流壩面典型速度場和階梯表面壓力進行詳細測量。 -
In this dissertation, according to the theory of mechanical dynamics and multi - body dynamics, a simulation model of nj2046 light off - road vehicle including suspension system, steering system and tires is built with the software carsim and so the vehicle steering characteristics are analyzed with the step angle input of steering wheel. it is found that the steering characteristics are different when the velocity and load are different, and the relationship between steering characteristics and velocity and load is presented
本文根據機械繫統動力學、多體動力學理論，運用動力學模擬軟體carsim建立了包括懸架系統、轉向系統和輪胎等模型的nj2046越野汽車整車模擬模型，在此基礎上分析了nj2046越野汽車在方向盤轉角階躍輸入時的轉向特性，通過對不同車速、不同載荷條件下的模擬計算，得出了在這些條件下該車具有的不同表現特徵，揭示了轉向特性與車速、載荷和輪胎的內在關系。 -
According to the frndamental and the steps of this method, we cans use the linear regress filter method to make the simulation of the wind load and then we can educe the curve of the time - process wind velocity. after that step, we can get the chart of the dynamic wind load which we can deliver the crosswind into the particle wind load and put them on the corresponding cell nodes. then we can do the analysis of the dynamical wind load through the time - process analysis to get the max value of the displacement
根據線性回歸濾波器法的基本原理和步驟，藉助相關軟體進行風荷載的人工模擬並得出風速時程曲線，進而轉化為風動力譜，由此將橫風向風力表達成節點風荷載作用於相應的單元節點上，按時程分析法對該空間桁架體系進行風荷載的動力分析，求出結構在進行風動力荷載分析時，結構相應節點對應的最值位移值。 -
The main work is done with the help of model experiment. in the flood - relief experiment, the flood carrying capacity of spillway tunnel is checked. in the hydraulic experiment of the diversion power conduit system, the followings are studied : the flow condition and fluctuation in the surge chamber, the distribution of flow velocity before the rack in the surge shaft, the amplitude of stage in the quick gate bay etc. the test step, content and results of different proposals are introduced in details
本項優化試驗研究的目的主要在於，通過泄洪系統整體水力學試驗，校核泄洪洞的泄流能力；通過發電引水系統整體水力學試驗，研究調壓井內水流流態和水位波動情況、調壓井內攔污柵前流速分佈情況；確定快速閘門井內水位波動幅度；試驗確定壓力管道水擊壓力穿井系數以及泄洪洞弧形門處的水壓力。 -
Taking the vr step motor as example in the paper, systemic research is conducted about the principle of the subdividing drive, the non - linearity relationship between microstep and phase current, the method of velocity adjusting and the interrelated factors. the system is designed to realize the subdividing drive, velocity adjusting and position. especially, there are two innovations in this paper. one is the first introduction of pld device and isp technology to the design of phase sequencer, the other is the new measure and amend method of microstep
本文以三相反應式步進電機為實例，對細分驅動原理、細分驅動的非線性、變細分調速以及相關影響因素進行系統的研究；實現細分驅動器、調速控制、定位控制和軟硬介面的設計。在此基礎上，本文對細分驅動環形分配器的設計和微步距測量修正進行了創新；提出將pld器件和isp技術引入到細分驅動環形分配器的設計思想和錯位測量和逼近修正法。 -
Thought the pan evaporation, it has been found that the evaporation of shengli crude oil is controlled by the first step and the effect of wind velocity is small. the prediction equation is dw / dt ^ k d ? 2 a ju, y hct / t, which is related with the liquid characters and states ( e. g. thickness, area, viscosity ) and is independent of wind speed
2 、實驗結果表明，勝利原油蒸發由第一步即蒸發由液體內部易揮發組分向液體表面的遷移來控制，因此風速影響很小，建立速率方程時不必考慮風速，只需考慮液體本身的性質和狀態（如厚度、表面積、粘度等） ，速率方程可寫為： dw dt = kd4 ? 』 a嚴t 。 -
Based on comparison of several technical schemes, the method of sand bedding pre - elevating and step water - filling pre - compressing is adopted. so the dissertation is consist of two parts : ( 1 ) the applicability study for the method of sand bedding pre - elevating and step water - filling pre - compressing, including numerical analyses for the thickness of sand bedding, the consolidation, settlement and stability of foundation, drainage, possibility of foundation liquefaction under seismic loading, et al. ( 2 ) monitoring at construction stage and checking the effect of foundation treatment, including the measurements of the settlement velocity and non - uniform settlement of ring beam under the tank, pore pressures and horizontal displacements in foundation, the pressure distribution at the bottom of oil tank and the strength increase of soils
通過多種技術方案比較，最終選擇了技術先進的砂墊層預抬高分級充水預壓法，論文工作主要由以下兩部分組成： （ 1 ）砂墊層預抬高分級充水預壓法的適用性研究，其中包括砂墊層厚度、地基沉降與固結度、地基穩定性、降水、地震作用下砂土液化的可能性等方面的計算分析； （ 2 ）施工監測與地基處理效果檢驗，其中包括油罐環梁基礎沉降速率與不均勻沉降程度、各分級充水加載階段地基超靜孔壓與深層水平位移、油罐底板壓力分佈及地基土強度增長等方面的實測與數據分析。 -
Although reducer can avoid step sense and oscillation partly, the strap transmission will influence orientation precision ( it is key norm to the small metallographic sample cutting machine ), so plan to use step motor to drive the screw directly, the step motor at low velocity, which is not drived by the subdividing drive system, will have obvious oscillation and noise that would influence the cutting function, the usage life and sample structure
由於步進電機是通過皮帶輪減速來驅動絲杠，進而帶動砂輪片前進和後退，雖然減速能部分消除步進感和振動，但皮帶傳動會影響定位精度，定位精度對精密切割機十分關鍵的技術指標。採用步進電機直接驅動絲杠，未經細分驅動的步進電機在低速運行時，有明顯的步進感、振動和噪聲，從而對切割的性能、砂輪片的使用壽命、試樣的組織結構產生較大的影響。 -
The details of the construction and characteristics of the new finite - difference scheme are presented in this thesis, by using both the integration theorem and the taylor expansion theory. it is proved that the new approach has the second - order accuracy on the grids with axis - symmetric voronoi cells and at least has the first - order accuracy in general. according to this character of the scheme and the computational requirements of the finite - difference approach, a striping procedure is involved to decompose the velocity model into variable spatial size grids with a nearly constant tune step preserved
本文從積分定理和taylor展開兩個角度，詳細分析了基於voronoicell的非規則網格有限差分演算法的構造過程及性質，並且在理論上證明了本文的差分方法的精度與網格形狀的關系：當voronoicell為關于節點的軸對稱圖形時，本文差分方法具有二階精度；在一般的網格上，則至少具有一階精度。 -
It really provides convenience to evaluate and optimize the design result. 3 ) vibration analysis has been fulfilled by calling some math libraries and graphic libraries in matlab to plot graphics such as velocity - time, displacement - velocity, step response, impulse response, gain - frequency and phase - frequency. we can know the capabilities of the spring system from the graphics
3 、在matlab環境下調用相應的數學函數庫和圖形庫對設計的彈簧進行分析，繪制彈簧加載后系統的速度-時間響應曲線、速度-位移響應曲線、階躍響應曲線、脈沖響應曲線、增益-頻率響應曲線和相角-頻率響應曲線，根據曲線來分析系統的各項性能。 -
The dynamic response of fuel cell characteristics after step change of cathode inlet velocity, humidity and cell voltage was analyzed
最後，分析了陰極入口速度、濕度和電池電壓階躍變化后電池特性的動態響應特性。 -
A vertical two dimensional model for thermo stratified flows is proposed, which solves the velocity and pressure by a fractional step method, and large eddy simulation model is used to calculate the reynolds stress and turbulent diffusion effect
摘要建立立面二維水動力學與水溫耦合模型，用分步法求解流速和壓力，採用大渦模型計算紊動應力和紊動擴散。 -
Exploiting the long jump technique parameter and treading strength in the planting step - time curve, and analyzing the kinematics and dynamics reasons for the loss of approach velocity, taking - off rapid supporting and stretching in the generating mechanism of vertical velocity during long jump take - off, the essay puts forward a new view of generating vertical velocity and offers a new thought for creating training of long jump
摘要利用世界優秀運動員的跳遠技術參數和跳遠踏跳階段踏跳力時間曲線，剖析助跑速度損失量、起跳快速支撐和蹬伸在跳遠起跳垂直速度的生成機制中的運動學和動力學原因，對跳遠垂直速度生成提出了新的見解，並為創新跳遠訓練提供了一條新的思路。 -
Illuminate the principle of using joystick controlling three - dimensional worktable displacement, design and implement the project of using joystick controlling the micromanipulation in three - dimensional way. and choose the velocity model of the step motor to control the displacement, which improves the control effect much better
對操縱桿控制三維工作臺定位的原理進行研究，設計控制方案，完成操縱桿控制工作臺三維定位，並進行實驗驗證，調整參數設置，選擇步進電機速度控制模式，改善操縱桿控制效果。 -
The main object of this paper is to design a diagonal impeller, which requires small size and high rotating speed the first step of design is to solve the radial distribution of parameters at the inlet and outlet of the blade, such as pressure, temperature and velocity. and then, according to the radial distribution, we can design the diagonal impeller blade. blade elements are defined on a cone, which pass through the blade edge streamline location
其設計思想是採用準三維設計方法，先進行二維流場計算，在葉片軸向間隙中設立計算站，應用數值計算方法計算葉片前後緣的壓力、溫度、速度等參數沿葉高的分佈，然後根據這些參數，選取若干個回轉面進行葉型設計；再將各回轉面上得到的基元葉型沿某一個積疊軸積疊起來形成三維葉片，最後對得到的三維葉片進行試驗，並對實驗結果進行分析比較。 -
Input pulse signal can be directly transformed into micro - step linear motion by use of linear pulse motor, which have found wide applications in the digital linear servo systems with high positional accuracy and high reliability. taking slpmu - 025a, a two - phase hybrid lpm manufacturing by shinko motor company ltd, as an specimen, the study on the drive control system is carried out in this thesis, which contains : ( l ) three kinds of drive circuits are designed and comparison analysis in theory is done ; ( 2 ) introduction to at89c51 microchip as controller and special micro - step constant current driver, a great variety of running modes driver control are developed ; ( 3 ) experimental testing and theoretical analysis of current waveforms and displacement graphs and velocity graphs are carried out in case of different micro - step constant current driver
本文以日本神鋼電機株式會社生產的兩相混合式直線脈沖電機slpmu - 025a為樣機，對直線脈沖電機的驅動控制系統進行了研究，內容包括： （ 1 ）設計了幾種直線脈沖電機驅動器電路，從理論上進行了對比分析研究； （ 2 ）用at89c51單片機作為控制器，採用專用的恆流細分驅動器sh ? 2h057m ，實現了開環控制方式下對slpmu ? 025a樣機各種運行方式的驅動控制； （ 3 ）對不同細分數下恆流驅動的電流波形以及各種運行方式下的位移圖、速度圖進行了實驗測試和理論分析研究。 -
In recent years, the step of whole world economy unify is more quickly, the market degree of our country is more deeply after entering wto, the competence in market is impetuosity gradually, all of these made our country enterprises being faced with a good many fights. at the same time, the fast development and abroad application of imformation technology brought important and deep infection to management of enterprises, and in great degrees changed the business mode and principle of the market competence. so if our country enterprises want to win a domain, they must use advanced imformation technology to arm themselves in order to increase satisfaction of clients, control the cost of management, shorten the time of fabricate and expend of material, accelerate the velocity of merchandise, increase efficiency of management, upgrade the power of competence. and that to implement enterprise resource planning - erp is just to change enterprise ’ old management pattern, to advance enterprise ’ level of management using information technology, to optimize enterprise ’ management pattern. so to research impling erp in modern enterprise and appraising its performance is much important to our enterprises to reply the compete more and more intense from international and stat
同時，信息技術的迅猛發展和廣泛應用對企業經營和管理產生了重要而深遠的影響，在很大程度上改變了商業模式和市場競爭法則。因此要想在激烈的競爭中贏得一席之地，我國企業必須盡快採用先進的信息技術改造和武裝自己，以提高客戶滿意度、控制經營成本、縮短物料製造配銷的時間、加速存貨周轉率、提高經營效率，提升企業競爭力。而實施企業資源規劃? ? erp正是改變企業陳舊的管理模式，利用信息化來提升管理水平，優化管理模式的利器，因此，研究erp在現代企業中的應用及其績效評價問題，對於我國企業應對日趨激烈的來自國際國內的競爭具有積極而深遠的意義。 -
The analysis of the distributions of simulated strain and velocity shows that the fins are multi - step local deformed
對模擬的應變分佈和速度分佈分析說明，齒成形的多道次局部成形規律。
分享友人