strength composite 中文意思是什麼
strength composite
解釋
復合力-
Effect of heat treatment on induced apatite deposition and bonding strength of the alkali treated titanium oxide layer for carbon carbon composite
碳復合材料上堿液處理氧化鈦鍍層誘導沉積磷灰石和結合強度的影響 -
In this paper, the mechanical character of composite level - stability - panel is analyzed, and the software clop is developed for the analysis of composite laminate strength
論文分析了某型直升機復合材料平尾的力學特性，並開發了能夠用於層合結構強度分析的計算機程序。 -
With the filling of diabase, the mechanical properties of the composite increased first and then decreased with a top tensile strength of 56. 5mpa and a top impact strength of 70. 1mpa. these illuminated that the diabase fiber reinforced pvc composites could be used as structure materials
復合材料的力學性能隨著輝綠巖的增加先升后降，復合材料拉伸強度最高可達56 . 5mpa ，復合材料沖擊強度最高可達70 . 1mpa ，說明輝綠巖纖維增強pvc復合材料作結構材料使用。 -
Series of guowei dry - method composite machines as new product are explored with our many years ' experience, the requirement of the users. the first metal of this machine is adopted with : photo - ecectricity auto. tracking " correcting deviation equipment, magnetic powder tension control. pneumatic back pressure shifting blade, oven temperature controlled qutomatically, big roll with oil heating, coating composite pneumatic control as well as double frequency governor etc. it will make the machine with fast speed, lower voice, low polluted by air, shout consumptionfor energy, stable working etc. especially suitable for al - foil with smooth surface and no enough firming, glass paper, polyester ect. the composite material with hard strength, fireproof, anti - ventilation, anti - fatty, frozen, dudrable steam etc character. it is widely used in food, pharmacy, as well as daily articles to package
「國偉」 、系列乾式復合機，是我廠根據多年的復合機製造經驗及結合客戶需求，開發的新產品，該機第一基材採用了「光電自動跟蹤」糾偏放卷裝置，磁粉張力控制、氣動背壓移動式刮刀、烘箱溫度分段自動控制、大輥筒導熱油加熱、上膠復合氣動控制及雙變頻調速技術，使該機具有復合速度快、噪聲低、空氣污染小、能耗低、運行平穩等特點，適宜於表面光滑的鋁箔玻璃紙聚酰胺等與聚乙烯、聚丙烯等薄膜的復合，復合薄膜具有強度高、防水、防透氣、防油脂、可冷凍、蒸煮等優點，廣泛應用冷凍食品、乾燥食品、醫藥品及日用品的包裝。 -
Because of the composite material is heterogenetic, we can design a composite material with optional strength and stiffness to meet the need as a special construction
由於復合材料的各向異性，可以設計出有任意方向的強度、剛度的材料，能夠滿足特殊機身結構的要求。 -
The subject is based on the study forward position of water resources management of liaoning province, and use the developed tendency and succeeded experience of world water resources for reference, take theory of sustainable development as guiding ideologue, adopt systematic project, protection of ecosystem and environment and theory of economy forecast engage in composite analyze, dynamic evaluate and forecast analyze, forecast developed tendency of water resources supplement and demand of liaoning province, put forward water resources rational disposition, economize on water, the prevention and control of water pollution and strength water resources protection etc. measures, supply decisional foundation for fight drought, economize on water and water resources optimized disposition, is water resources strategic research forward sustainable development, is a part of water conservancy developed program of liaoning province in the 15 period, and it has important significance to accomplish the sustainable development of economy and environment of liaoning province
本課題立足於遼寧省水資源管理研究前沿，借鑒了國內外水資源發展趨勢和成功經驗，以可持續發展的理論為指導，運用系統工程、生態環境保護理論和經濟預測理論進行綜合分析、動態評價，進而預測遼寧省水資源供需發展態勢，提出了遼寧省水資源合理配置、節約用水、水污染防治和增強水資源保護等措施，為遼寧省抗旱、節水和水資源優化配置提供決策依據。本文是面向可持續發展的遼寧省水資源戰略研究，是「十五」期間遼寧水利發展規劃整體布局的一部分，對實現遼寧省經濟、資源可持續發展具有重要意義。 -
Firstly, the surface characteristic of polystyrene particle is changed from water detesting to water intimity by using special techniques and admixtures so mat the compound quality with inorganic materials is insured. secondly, the contradiction between the weight and strength is solved through optimizing the particle size and using composite fiber and the best heat conductivity is achieved under the condition that the necessary strength is met. in the research process, the author solved the problem of fiber dispersing in insulating materials so that the contraction of the material is controlled
課題研究中，首先採用特殊的改性工藝及外加劑實現對聚苯乙烯顆粒表面的成功改性，使其表面由憎水轉化為完全親水，確保與無機材料的復合質量；其次，通過採用優化骨料級配及使用復合纖維等措施解決了保溫材料的輕質與強度的矛盾，使保溫材料在滿足必要的強度的前提下，導熱系數降至最小；並且，課題研究中成功解決了纖維在保溫材料中均勻分散的問題，達到了抑制保溫材料收縮的目的；最後，通過採用復合外加劑、合適的膠凝材料及合理的配比等措施確保該保溫材料具有良好的和易性，滿足施工的要求。 -
The particles distributed hi the matrix of grey cast iron, but some contact each other. the composite layer extend gradually into the substrate. when volume fraction of wc is 36 wt % and 27 wt %, the matrix of the composite is high chromium cast iron, consist of white carbide bars and the austenite. wc particles distributed uniformly, retaining approximately quondam granular form in the composite layer which has an evident interface area with the substrate, with good bonding strength
對不同碳化鎢體積分數的灰鐵和低鉻鑄鐵基復合材料的微觀組織結構分析表明：碳化鎢體積分數為52時，復合層內基體為灰口鑄鐵組織，顆粒直接分佈在灰鐵基體上，部分碳化鎢顆粒有相互接觸的現象，基材與復合層之間沒有明顯的過渡；碳化鎢體積分數為36 、 27時，復合層內基體為高鉻鑄鐵，由面塊狀的奧氏體和白條狀碳化物組成，碳化鎢顆粒表面固溶於基體組織中，粒形基本保持完整，分佈均勻，與基體構成冶金結合，基材與復合層之間存在一個明顯的平緩過渡區。 -
When fillings is other materials ( unprocessed montmorillonite, powder coal ash, co - composite of powder coal ash and organo - montmorillonite, co - composite ofcarbonizing calcium and organo - montmorillonite ) in the binder and content of organo - montmorillonite in the binder is five percent decided by tensile - shear experiment, tensile - shear strength of binder is up to tiptop ; at the same time, this paper carries out abrasion experiment, and, by comparison, concludes abrasion property of coating is optimum when content of organo - montmorillonite in the binder coating is five percent, and observes abrasion sample under set
當膠粘劑中填料為其它物質（未處理蒙脫土、粉煤灰、粉煤灰和有機化蒙脫土共復合、碳化鈣和有機化蒙脫土共復合）時，通過拉伸剪切試驗確定膠粘劑中有機化蒙脫土含量為5時，膠粘劑的拉伸剪切強度最高；同時進行了沖蝕磨損試驗，通過比較得出，當膠粘劑塗層中有機化蒙脫土含量達到5時，塗層的耐沖蝕磨損性能最佳，並對沖蝕磨損試樣在掃描電子顯微鏡（ set ）上進行觀察。 -
The binding principle in pelletizing covers a comprehensive model of interfacial reaction among particles inside green pellets, the formation of binding film during hardening of green pellets by baking to obtain enough strength for a volumetric catalyzed reduction model for cold - bound pellets bearing composite binder and corresponding high temperature reduction system in rotary kiln
提出了含復合粘結劑的生球強度界面作用力綜合模型，冷固球團礦強度的粘結膜機理，含復合粘結劑的冷固球團礦催化還原體積反應機制及全窯高溫快速還原熱工制度。 -
Otherwise, the tests of basic mechanical properties shows that block strength affects bearing strength of masonry and mortar strength decides shear resistance, block strength is greater than the masonry, the compressive and shear of two - rows masonry is greater than one - rows. the paper also elementary analyze the composite walls with ansys on seismic behavior out - of - plane
此外，基本力學性能試驗表明:砌塊強度決定砌塊砌體的抗壓強度，砂漿強度決定其抗剪強度;雙排孔砌塊砌體的抗壓和抗剪強度均大於單排孔砌塊;單體砌塊抗壓強度高於砌塊砌體抗壓強度。 -
2. the design of cement power - sprayed is introduced in the thesis including composite foundation bearing capacity design, the checking computations of underlayer strength and composite foundation deformation
介紹了粉噴樁設計，即粉噴樁復合地基的承載力的設計計算，下臥層強度和復合地基變形驗算，並對粉噴樁的設計思路作了歸納。 -
By field loading tests and small strain measurement, the result of improving soft soil with cement power - sprayed piles is alalyzed. the author believes that the result is good and composite foundation is able to meet the superstructure ' s requirement for foundation strength and formation
通過現場荷載試驗和低應變測試，對粉噴樁加固效果作了分析。從試驗結果來看粉噴樁加固軟土路基加固效果很好，能滿足上部結構對地基強度和變形的要求。 -
The sort, material composite, structure properties and conduction mechanisms of eca ( electrical conductive adhesive ) were discussed in this paper. then three types of ega specimens were designed and made, on which temperature cycles test from - 55 ? to + 125 ? and thermal aging at + 125 ? were carried out. changes of the adhesive strength, eca ' s bulk resistance and contact resistance under the environment stress were summarized and a detailed evaluation on these specimens was given
本文在全面闡述導電膠的分類組成、物理結構、導電機理的基礎上，設計並製作了三批導電膠樣品，通過對樣品進行長時間的- 55 ? ? + 125溫度循環和125高溫存儲試驗，總結了導電膠粘接強度、體電阻和接觸電阻在環境應力下的變化規律，對三類樣品的長期可靠性做出了全面的評價，並結合導電膠電阻率和「穿流閾值」的計算機模擬，給出了提高導電膠可靠性和電導率的建議，介紹了國內外在高電導率高可靠性導電膠研製方面的一些最新進展。 -
Fiber reinforced plastic rebar ( frp ) is a new composite, which is composed of fiber acting as reinforced material, synthetic resin acting as matrix, and some adequate auxiliaries, and is formed through a pultrusion process and necessary surface process. it has a high strength to weight ratio, excellent non - corrosive characteristic, fatigue - resistant characteristic, strong designability and magnetic neutrality, so it can be used in the applications with special performance requirements or where reinforcing bars are subjected to severe chemical attack
纖維增強塑料筋是以纖維為增強材料，以合成樹脂為基體材料，並摻入適量輔助劑，經拉擠成型技術和必要的表面處理所形成的一種新型復合材料，具有比強度高、耐腐蝕性能好、可設計性強、抗疲勞性能好、耐電磁等獨特優點。 -
The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film
試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。 -
We research the causes of concrete cracking, develop the high performance anti - cracking additive, optimize the concrete mix and construction techniques, increase the stability of concrete volume by shrinkage compensation, enhance splitting tensile strength, and can meet demand of high workability of fresh concrete. in the study, a thorough investigation of this problem is made from all points of view, with the aid of various modern measurement & testing technology and different theories & methods in surface physical chemistry, structural chemistry, solid - state chemistry, composite materials, fracture mechanics, etc. our research results have shown that the various shrinkage of concrete cause concrete cracking in building engineering, such as autogenous shrinkage, dry shrinkage, temperature shrinkage, plastic shrinkage, carbonized shrinkage, etc
目前，解決混凝土開裂的方法是綜合的，我們調查研究了混凝土開裂的原因，開發研製了高性能抗裂外加劑，優化混凝土的設計和施工方法，並通過補償收縮達到混凝土體積穩定，提高抗裂強度，滿足混凝土拌和物高工作性能的要求。本研究採用多種測試技術，應用表面物理化學、結構化學、固體化學、復合材料學、斷裂力學等多學科的理論與方法，從不同的角度進行深入的研究和探討。通過調查研究建築工程中出現的混凝土開裂、滲漏問題，發現混凝土在非荷載作用下開裂主要是由混凝土的自收縮、乾燥收縮、溫度收縮、塑性收縮、碳化收縮等各種收縮變形引起的。 -
It is high performance concrete of low water - binder ratio. with its own gravity and without any vibration, it can fill up the space automatically. with high adding quantity of fly ash and slag, high quality water reducing agent and other compound admixture is the most important technology of this kind of high performance concrete. scc focus on high workability at the same time on high strength and high durability through choosing the composite of aggregate, additives, content of cementions material, admixture reasonably and the optimum design of mix proportion
本文研究了採用吉林省本地原材料和常規生產工藝配製c40自密實混凝土的製作技術，採用水膠比、粉煤灰摻量、砂率、膠凝材料總量四個因素進行配合比的正交設計，試驗分析了自密實混凝土拌合物的工作性以及硬化后的力學性能、耐久性和生產與施工注意事項，並對其經濟性做出了客觀評價，本次試驗為吉林地區自密實混凝土的推廣應用提供了數據基礎。 -
Filament winding is an important technology in manufacturing high strength composite components and is first used in national defense and aerospace industry. now it has been gradually applied in civil use and has bright future
它最早應用於國防和航天工業中，現在已逐漸向民用擴展，在民用工業中有著廣闊的應用前景和推廣價值。 -
In the few years, the high strength composite nonwoven made of web and filament has been widely used
摘要近年來使用長纖補強而成之高強力復合不織布有逐漸成長之趨勢。
分享友人