structural size 中文意思是什麼

structural size 解釋
結構尺寸
  • structural : adj. 構造上的，結構上的，組織上的。adv. -ly
  • size : n 1 大小，尺寸規模身材。2 （鞋帽等的）尺碼，號；（紙張的）開。3 巨大，大量；相當大的分量。4 〈口...
  1. On the premise of a given set of material parameter, structural boundary shape and condition, design variables - thickness of plate and shell, is designed to minimize the structural weight subjected to the constraint conditions. 1. for the problem with size and stress constraints, full stress design method is used to solve the sectional optimization of plate and shell structures

    在給定了板殼的材料常數、板殼結構的邊界形狀和邊界條件的前提下，確定表徵板殼厚度的設計變量，在滿足約束條件下實現結構重量最小： 1 .對于尺寸和應力約束的問題，使用滿應力方法求解。
  2. In this paper, the geogrids structure, the flexible beams strucrure, the geogrids and flexible beams structure are analysed with algor, and it is used to analys the influence of some paramenters. such as the modulus of structural layers, size of structure, place of structure, non - uniform settlements. and the contrast of the three structures is analysed in this paper. we can see the reasonable size and reasonable place through analyse. the analyse of the test road show that the structures worked well for about two years and the reflection cracks have not be found

    本文首先藉助algor有限元軟體對土工格柵處治結構、柔性枕梁處治結構及土工格柵與柔性枕梁復合結構進行了力學分析，包括各結構層模量影響規律分析，格柵及枕梁尺寸、位置影響規律分析，路基不均勻變形影響規律分析，各種處治結構間的對比分析等。通過分析，得出了各結構的合理尺寸及合理的布設方案。
  3. Note : the structural length and connecting flange size of butterflyvalve series can be designed and manufactured as per user ` s requirement

    注：系列蝶閥結構長度及連接法蘭尺寸可根據用戶要求設計製造。
  4. The c - value paradox : no correlation between apparent structural complexity and genome size

    值矛盾：結構上的復雜度與基因組大小沒有明顯的關系。
  5. We rounded analysis that ring stator ’ size parameter how to affect ring stator ’ characteristic frequency by use the software for numeric analysis, and afford theoretical foundation for the optimum design of ultrasonic motor ’ structural parameter

    本文還利用分析軟體，全面地分析了定子圓環各個尺寸參數對特徵頻率的影響，為超聲波電機結構參數的優化設計提供了理論依據。
  6. The favorable reservoir spaces in the carbonate rock could be divided into five types according to their origin, configuration and size, i. e., solution fissure, solution hole, cave, erosional fissure and structural fissure, which form five different reservoirs including cave - type reservoir, erosional fracture reservoir, structural fissure reservoir, and solution pore marginal beach grainstone reservoir

    而下奧陶統灰巖段儲集和生產油氣的有效儲滲空間按成因、形態及大小可劃分為溶蝕孔隙、溶蝕孔洞、大型洞穴、風化裂隙、構造裂隙等5類，構成5種性質有別的儲層，即洞穴型儲層、風化裂隙型儲層、構造裂隙型儲層、臺緣灘相顆粒灰巖溶蝕孔隙型儲層和地表殘積物裂隙孔隙（洞）型儲層。
  7. The voltage of lithium - intercalation reaction, impedance and structural stability of intercalation - type cathode material were analysed and calculated. theoritical results show that the reaction voltage depends on the content of lithium and the bond energy, and that the key ways to lower the electrode impedance are to increase the electronic conductivity of the electrode and the diffusion coefficient of lithium ion in the host and to decrease the size of powder. in addition, the thermal stability of lithium - insertion structure can be improved by using crystallographic co - lattice theory and doping treatment

    本文從嵌入式陰極材料的嵌鋰反應的電壓、阻抗及結構穩定性的分析和理論計算著手，得到了電壓取決于基體中各種離子間的鍵能及鋰含量、降低電極阻抗的關鍵是提高電子型導電性和li ~ +在基體中的擴散系數及減小粉末粒度的理論依據及其利用晶體的共格原理和摻雜改性的方式來提高材料嵌鋰結構的熱穩定性的設計思路。
  8. Using the complex potential method in the plane theory of elasticity of an anisotropic body, a series solution to the stress field of a finite plate containing multiple cracks subjected to arbitrary loads is obtained by means of the faber series expansion, and the stress intensity factors at the crack tips are calculated based on the theories of fracture mechanics. equivalence yield stress is introduced in order to consider the effects of the plastic zones, with which the strip yield criteria is developed in the article so that the effects of structural size and the crack interactions on the stress distribution can be considered accurately. the effects of plate size, crack size and crack distributions on the stress intensity factors as well as the residual strength of the plate are studied detailedly

    採用各向異性體平面彈性理論中的復勢方法，以faber級數為工具，得到了含多裂紋有限大板在任意載荷作用下應力場的級數解，並應用斷裂力學方法確定裂紋尖端的應力強度因子；引入當量屈服應力考慮裂尖塑性區的影響，提出基於帶屈服準則的剩餘強度分析模型，能夠充分考慮結構尺寸和裂紋之間相互作用對應力場的影響；通過數值計算詳細討論了結構尺寸和裂紋之間位置關系對應力強度因子和結構剩餘強度的影響規律，得到了一系列對工程應用具有實用價值的結論。
  9. A two component design consisting of appropriate size and length of structural reinforcing rods and dead - end component is required to transfer axial tensile loads and distribute radial compressive forces through the plastic jacket and onto the internal strength members without damaging the fragile plastic jacket or internal optical fibers

    螺旋預絞絲結構不僅能有效地降低配合區域內光纜單位應力和避免應力集中，傳遞軸向張力，而且將預絞絲的徑向壓力均勻地分佈在這段較長的配合區域內。
  10. For the increase of ship size and the development of new ship type, every classification society in the world is searching for reasonable and reliable new design method. then ship structural direct calculation method is used more widely than before

    由於船舶尺度的增大以及新船型的開發，世界各國的船級社都在尋找既先進科學又合理可靠的新的設計方法，因此船舶結構強度直接計演算法的應用日趨廣泛。
  11. In this thesis, the physical properties of a series of na2fepo4f cathode materials synthesized by various routes are instigated and discussed in the light of structural ( xrd ), thermal ( dta ) analyses and particle size distribution. their microstructures were studied by transmission electron microscope ( tem ) and scan electron microscope ( sem ). the electrochemistry property were evaluated with cells containing the synthesized na2fepo4f as positive electrode

    本文將藉助x -射線衍射、掃描電鏡、透射電鏡、差熱分析以及電化學測試等方法，系統研究多種制備法對所合成的鈉離子二次電池正極活性材料氟磷酸亞鐵鈉的微結構以及循環可逆容量、循環伏安性能、交流阻抗譜的影響。
  12. The constituents of 2d parametric graphics and the associated relations of them are discussed ; the key techniques, the building and the driving of the structural constraint and the size constraint model are studied ; a efficient method is provided for the serialized design in mining cad

    討論了參數化二維圖形的組成及其關聯關系，研究了圖形結構約束模型和尺寸約束模型的建立方法和驅動求解等關鍵技術，為開采設計cad中系列化產品設計提供了一種有效手段。
  13. We then discuss, from the perspective of economies of scale and economies of scope, the proper construction of the organizational and structural framework of a financial holding company and its subsidiaries to ensure that there is appropriate arrangement of the controlling - subsidiary relationship under the basic legal structure in respect of the size of business and the allocation of personnel in order to generate economic returns. the second chapter elaborates the financial holding companies and their subsidiaries, and seeks to provide possible solutions for challenges encountered. based on the author ’ s relevant experience in taiwan, this paper proposes a feasible arrangement of the organization and supervisory system for the board of directors, the supervisory board ( the board of corporate auditors ) and the management level, the underlying framework of which is mainly based on the regulatory structure of the us financial holding companies

    第三章就監事責任及職權詳細研究，由於中國采大陸法系之立法，對監事責任之掌握較不具體，爰引述了英美受託義務（ fiduciaryduty ）之觀念進行分析，而就監事職權，相對的也是職責，則提出世界上較有表彰性的立法加以補充，希望可以填補其不足，最後比較監事會與獨立董事、審計委員會之各項功能，認為美國公司體制之董事會已漸將經營職能轉予首席執行官（ chiefexecutiveofficer ） ，而留下監督之職能，故可以審計委員會擔負監察職能之前置工作，而觀諸中國之社會經濟情勢，如徑予採行，將出現缺漏，故建議維持監事制度。
  14. Firstly, samples are determined by experimental design methods and size optimization of the structures corresponding to the samples is executed with nastran. secondly, an approximation model ( surrogate model ) based on the samples is derived using kriging method. thirdly, the optimal locations of structural elements are found by genetic algorithms ( ga ) because genetic algorithms can find global optimal solutions of surrogate model easily

    基本思路是利用試驗設計法選取樣本點，並對樣本點對應的結構進行尺寸優化，然後根據樣本點和優化結果建立代理模型，再利用遺傳演算法求出設計變量最優解，進而得到結構最優解。
  15. One is about of temperature - dependence of luminescence of eu3 + and tb3 + doped in oxide glass and nanocrystalline y2o3 ; the other is about of light - induced luminescent and structural change in nanocrystalline y2o3 : tb. the creative works are as follows : ( 1 ) euand tb doped nanocrystalline y2o3 with different sizes were prepared by combustion synthesis. dependences of particle size, crystallinity and fluorescence characteristic on ratio of gly / y ( no3 ) 3 and annealing temperature were studied

    本文以變溫與光輻照為實驗方法研究了eu與tb摻雜y _ 2o _ 3納米晶及氧化物玻璃中發光性質隨溫度的變化關系和光誘導y _ 2o _ 3 ： tb納米晶發光性質及結構的改變過程，得到如下創新性研究成果： （ 1 ）用燃燒法制備了稀土摻雜y _ 2o _ 3納米晶，研究了甘氨酸與硝酸釔的反應比例（ g n ） 、退火條件對稀土摻雜y _ 2o _ 3納米晶顆粒尺寸、結晶狀況及發光特性的影響。
  16. The results showed that the gradation, which designed by volumetric methods, has perfect water - stability and other pavement performance also can meet the demands of expressway. by integrating compaction capacity and pavement performances, the optimal ratio of the structural layer thickness to the maximum particle - size is 2. 5. the water resistance of the mixture added amine type anti - stripping agent attenuates severely after long - term aging, but the mixture added hydrated lime not only can improve obviously the capacity of water resistance, but also has perfect long - term pavement performance

    研究結果表明，採用體積法設計的級配不僅具有較好的水穩定性而且其它路用性能均滿足高速公路面層的要求；綜合考慮壓實性能及路用性能，提出了瀝青路面表面層結構層厚度與混合料最大粒徑的合理比例為2 . 5 ；摻有液體胺類抗剝落劑的瀝青混合料經長期老化后其抗水損害能力衰減嚴重，而摻加消石灰的混合料能顯著提高其抗水損害能力，且長期性能較好，是一種優良的抗剝落劑。
  17. To obtain high fluid structural lightweight aggregate concrete with good uniformity, it is necessary to limit the max grain size of lightweight aggregate to 20mm, cement content to 500kg / m ~ 3 and slump of concrete mixture to 260mm

    要獲得均勻穩定的大流動性結構輕集料混凝土，陶粒的最大粒徑不宜超過20mm ，水泥用量不宜超過500kg / m ~ 3 ，拌和物坍落度宜小於260mm 。
  18. Aim : to analyze the mechanism, thermadynamic theoretical basis, dynamic mechanism and influencing factors of thermally induced phase separation ( tips ) in order to completely grasp the factors affecting the size, distribution and form of pores, so that the adjusted range of pore can be widened and the preparation of porous membrane can be repeated and controlled. methods : considering from the structural characteristics of tissue engineered materials, the methods of preparing porous membrane using tips technique, the hermadynamic theoretical basis, dynamic mechanism and influencing factors were analyzed, the problems and investigative directions in the future were also analyzed. tips technique is a process of phase separation of polymer homogenous solution under quenching, and it is suitable for diameter and structural form of the micropore materials prepared using tips are closely correlated with the kind and dispensing proportion of polymer attrnuant, polymer concentration and polymer molecular mass, etc. conducted, including determination of polymer - solvent system phase diagram, study of form and appearance of porous membrane of different thickness, study of form and appearance of porous membrane prepared with systems of different x, which is the parameter of polymer - solvent interaction

    目的:分析熱致相分離成膜過程的機理、熱力學理論基礎、動力學機制以及影響因素，以便充分掌握影響孔度大小、分佈、形態的因素，使孔度調控范圍得以拓寬，使多孔膜的制備能重復可控.方法:從組織工程材料結構特點出發，分析熱致相分離聚合物多孔膜的制備方法及該法成膜的熱力學理論基礎、動力學機制以及影響因素.並分析實驗中存在的問題及今後的研究方向.結果:以熱致相分離法可制備聚合物多孔膜.熱致相分離法制備多孔膜是高聚物均相溶液在淬冷條件下發生相分離的過程，它適用於上臨界共溶溫度型聚合物一稀釋劑二元體系.熱致相分離法成膜的過程，可以認為是旋節線機理佔主導地位.熱致相分離法制備的微孔材料，其孔隙率、孔徑大小、結構形態與聚合物稀釋劑的種類、組成配比、聚合物濃度、聚合物分子量等因素密切相關.結論:可採用熱致相分離技術制備多孔膜，通過改變不同的成膜條件可獲得一系列不同孔徑尺寸和孔徑分佈的多孔膜材料.對熱致相分離成膜過程中聚合物-溶劑體系的相圖測定，不同厚度的多孔膜形貌研究，不同x （聚合物-溶劑相互作用參數）體系所制備的多孔膜形貌等需深人研究
  19. Also considers structural features : grain size, interstitial and substitutional solutes, precipitates, second - phase particles, and eutectoids

    亦考量結構特徵如：晶粒、有格隙型固溶體和置換型固溶體、析出物、第二相顆粒和共晶。
  20. Optimization design of structural size of microchannel cooling heat sink

    微槽冷卻熱沉結構尺寸的優化設計
分享友人
分享到 Line

分享到臉書