work coefficient 中文意思是什麼

work coefficient 解釋
工作量系數
  • work : n 1 工作，操作，勞動，作業；工件；功課；努力；行為，作用。2 （待辦的）事務，業務；職業。3 〈前有...
  • coefficient : adj. 共同作用的。n. 1. 共同作用；協同因素。2. 【數，物】系數，率；程度。
  1. Nearly all civil engineering structures, roofs, roads, and any concrete work have a run-off coefficient of about 95 per cent.

    幾乎所有的土木工程構築物，屋頂、道路和所有的混凝土工程，其徑流系數均為95左右。
  2. Studying the rule of the reflect - coefficient at the interface, simulating the seismic wave travel in the field beyond the critical angle, analyzing the wave polarity diversification, all the work provides a theory for the wide - angle reflection

    通過研究反射系數在超臨界角部分的規律，模擬地震波在超臨界角的傳播，分析了地震波的極性變化，為廣角反射提供理論依據。
  3. The following is main research work : 1. geometry characters ( such as tangent plane and normal plane etc. ) and differential coefficient characters are theoretically analyzed in detail, then the intersection differential coefficient system model for trace is constructed

    在理論上，系統地分析了交線的幾何特徵（如切平面和法平面等）和微分特徵（如曲面的一階基本齊式等） ，建立了交線的微分系統跟蹤模型，從而為今後進一步研究求交問題提供了一個可行的途徑。
  4. In this work, the transmitting characteristics of transformer on various kinds of loads were investigated, and an oil - filled compact pulse transformer was designed. from experiments, the parameters with primary inductance 2. 578, h, secondary inductance 167. 710uh, and coupling coefficient 0. 7238 were obtained

    7238 、直徑20cm 、長50cm （外殼） 、耐壓300kv的緊湊型空心脈沖變壓器，並在此變壓器上進行了大量的實驗，得到了實驗與理論分析相一致的結果。
  5. When the electric interlocking apparatus at station do not work, we can exactly and promptly obtain, the states of switch in route, display in notebook computer by white strip light plainly, and thus increase the safety coefficient enormously and train working efficiency

    系統自成體系，當車站電氣集中設備停用后，使用該系統能夠及時、準確地反映進路上的道岔狀態，並將所排進路以白光帶的形式直觀地在筆記本電腦上顯示出來，大大提高了非正常情況下接發列車作業的安全系數和作業效率。
  6. At the moment, the thing is plans compiled by hand have a low quality and are effected by factitious factors. the execution of adms can not only improve the station organization and the level of the management but also accelerate the modernization of work which can make out good plans, make full use of the device of station, improve the accuracy coefficient of passenger trains and as a result the whole level of railway organization is to be lifted, the modernization of railway system management is to be accelerated at the same time both the economic and social efficiency are to be improved

    現行手工編制不但勞動強度大，而且受許多人為因素的影響，編出計劃的質量得不到保證，所以客運站站調輔助決策管理系統的建立，不僅可以提高車站工作組織和車站技術管理水平，促進車站工作組織與管理現代化，從車站內部盡可能實現作業計劃優化，挖掘車站潛力，提高旅客列車正點率，而且可以提高鐵路運輸組織水平，促使鐵路車站管理手段的現代化，從而提高鐵路運輸的經濟效益和社會效益。
  7. Using the system designed in this thesis work, flow field calibration of the wind tunnel is accomplished, which covers dynamic pressure drop coefficient, dynamic pressure time stability, axial static pressure gradient, boundary layer, and degree of turbulence, etc. boundary layer measuring principle and method are especially described in detail, the relationship between boundary layer thickness, wind speed setting, and the depth of the experimental section is summarized, and finally the calibration data for th e model center zone under specific wind speed are given

    然後利用本文設計的系統完成了落差系數、動壓時間穩定姓、軸向靜壓梯度、邊界層及湍流度等內容的流場校測。特別對邊界層測量的原理及方法做了較詳盡的敘述，總結出邊界層厚度與設定風速、實驗段深度的關系，然後給出模型中心區一定風速下校正數值。
  8. This article described the deformation features of taojiaba landslide and analyzed the inner factors, geologic setting, topography, morphology, stratum, lithology and texture, and the external influence factors, precipitation, flood, human activity, neotectonic activity and earthquake, and the transform features of landslide in the near future, and evaluate stability of landslide through the section coefficient method calculation on basis for landslide mechanism analysis and control work

    摘要陶家壩滑坡基本特徵顯示，滑坡變形的主要影響因素有：地質環境因素（地形地貌、地層巖性、物質結構） 、外界影響因素（降水因素、洪水因素、人為因素、新構造及地震） ，以及滑坡近期變形特徵，通過剖面遞推系數法計算，對滑坡的穩定性進行了評價，為滑坡機制分析和優化整治措施提供依據。
  9. With experiments and theoretical analyzing, we find when the heat discharge is smaller than the entrainment limited, what influences the ability of heat - transmitting of work quality is the quantity of injection and dry limit fluid inventory, the optimum quantity of injection of the three working fluid is 8 ~ 14g ; and the delivering factor that transmission coefficient is determined by capillary limit, not the heat transmission ability of the thermal syphon. therefore, among the three working fluid, acetone is the best. low wind - speed has the obvious function in heat transmission of the thermal syphon

    本文通過實驗研究和理論分析，認為在熱流量小於攜帶極限時，影響工質傳熱能力的是cpu重力熱管的充液量和其乾涸極限，此次所實驗的三種工質，最佳充液量應當在8g ~ 14g ；傳輸因素主要決定普通熱管的毛細極限，而不是重力熱管傳熱能力的決定因素；三種工質中的最佳工質是丙酮；小風速時風速的變化對cpu重力熱管的傳熱有明顯的作用，但在風速大於1m / s以後，風速增加對于cpu重力熱管的傳熱能力的增加效果減緩。
  10. The main work is as following : firstly, some basic issues of economical operation of transformers are analyzed. focusing on calculating the economic load coefficient and carving up the running area of the transformer, determining the advantage between transformers, confirming economical operation mode of transformers in the parallel or divided running condition

    分析了變壓器經濟運行的一些基本問題，主要對變壓器的經濟負載系數的計算、運行區間的劃分，變壓器間技術優劣的判定以及並列和分列運行模式下經濟運行方式的確定進行了分析和討論。
  11. Based on a cone - shaped compound heatshield, a series of research work has been done from the investigation of theoretical analyses of ablative and insulating principles and technical experiments. 1 based on the exploration of improving material performances, a feasible scheme of adding insulating functional layer is proposed ; 2 a simplified calculation method is proposed via establishing fea ( fmite element analysis ) and instantaneous heat transmission is calculated with the mentioned method ; 3 a practical engineering scheme is proposed through a series of experiments ; 4 the interface problems of the function layer are solved through co - curing method and successful samples are manufactured ; 5 in order to estimate properties, the heatshield was anatomized engineering applied possibility is explored on the analyses of performance evaluation by testing mechanical properties, coefficient of heat conductivity and doing dynamic ablative experiments, also, the comparison with that of the required materials is done

    本文以一錐形復合防熱套為研究對象，從燒蝕、隔熱機理的理論分析和工藝試驗兩方面，進行了一下研究工作： 1 、通過對提高材料及製品通過對提高材料及製品隔熱性能的多種途徑進行探討，提出了採用添加隔熱功能層，研究復合型大面積防熱套是理論有效、工藝可行的方案； 2 、通過建立有限元分析模型，對防熱套的燒蝕隔熱行為進行了理論分析，提出了簡化的隔熱計算方法，並用該方法對復合型防熱套的瞬態傳熱模型進行了分析計算； 3 、通過復合型防熱套的工藝探索試驗，提出了一種工程應用上切實可行的工藝方案。
  12. Drawing piece unfold size is one basic condition under the calculation on coefficient, number of drawing, handbooks or books of press are not given, practice press production, die designer designs drawing die by experience calculation, after testing, according to deformation, state, defect shape of testing blank, shape and unfold size is revising, finally, unfold size and shape of blank are determined, designing period is longer, cost of die and work piece is to raise, economic benefit is to reduce

    拉深件展開尺寸是拉深可行性分析中計算拉深系數與拉深次數的前提條件，現有沖壓手冊或教材對于復雜拉深件的展開尺寸計算尚未論述。復雜拉深件的沖壓生產中，模具設計者憑經驗估計拉深可行性，設計製造拉深模進行反復試壓，根據試壓件的形變狀態，缺陷形貌，制定坯料展開尺寸和形狀，周期較長，因而生產成本高，經濟效益不佳。
  13. The main work includes : for the torsional vibrations of a rigid disk on saturated media, first, the dynamic governing equations are solved by the use of hankel transform and the general solutions in the hankel transform fields are formulated. then, considering the mixed boundary - value condition, the dual integral equations of the torsional vibrations of a rigid disk on saturated grounds are obtained, which can be reduced to the fredholm integral equations of the second kind and solved by numerical procedures. consequently, the dynamic compliance coefficient curves and the torsional angle amplitude curves versus the dimensionless frequency are presented and contrasted to that of the elastic one

    在前人研究的基礎上，本文基於陳龍珠等曾提出的一組實用飽和土波動方程，用解析或半解析的方法首次較系統而深入地研究了飽和半空間地基與基礎的扭轉振動問題，主要工作有：對于飽和地基上剛性圓板的扭轉振動，作者首先採用hankel變換求解了動力控制方程，得到了該控制方程在hankel變換域內的通解，然後由混合邊值條件建立了飽和地基上剛性基礎扭轉振動時的對偶積分方程，並將其化為易於數值求解的第二類fredholm積分方程，用數值方法計算了基礎的動柔度和扭轉角幅值與振動頻率的關系曲線，並將其與單相彈性介質情況進行了對比分析。
  14. Firstly, this paper describes the optimization problem of thermal stress of fabrication process and steady work process for the hollow cylinder and the infinite plate. then, thermal stress distribution is calculated making use of theoretical formulation and the results can be validated by finite element method. in optimization, the restriction condition is heat insulation performance and the objective function is danger coefficient

    本文首先對平板結構和圓筒結構梯度塗層在制備過程和穩定工作狀態下的熱應力優化設計問題進行描述，然後分別用解析法求解兩種結構的梯度塗層在制備過程和穩定工作狀態下的熱應力分佈，並採用有限元方法驗證了熱應力分佈的結果，在優化設計時，以危險系數為目標函數，以塗層的隔熱性能為約束條件進行設計。
  15. The work of cohesion increased with the enhancement of wettability, but the bending strength of the welding specimens did not. when wc or mo was added the mode was adhesive rapture ( ii ) because of the difference between the thermal expansion coefficient of wc, mo and ni. the bending strength was high when iv rapture was occurred

    研究發現粘附功隨潤濕性的改善而提高，但是焊接試樣的抗彎強度並沒有呈現明顯的這種趨勢；由於wc和mo與金屬ni熱膨脹系數相差較大，焊接試樣斷裂方式為內聚型斷裂（型斷裂） ，抗彎強度較低；以型方式斷裂的體系具有較高的抗彎強度。
  16. Work out the standard result of economic coefficient, it is important parameter in classification on arable land. it also provides references for the research of economic efficiency of arable land and balance and coordinates the differences of classifications in various regions on arable land

    計算出的全國各縣基準經濟系數成果可作為國家級分等參數，為宏觀研究農用地經濟效益，平衡協調區域間農用地等別差異提供參考依據。
  17. We propose several watermarking techniques after analyzing other watermarking methods detailedly. the main contributions can be summarized as following : ( 1 ) based on previous work, we proposed an improved spatial self - embedding watermarking technique. we save the quantized dct coefficients using group encoding while not using bit matrix which restricts saving bit length of each dct coefficient

    本文的創新之處總結如下： （ 1 ）提出了一種改進的具有修復功能的空域自嵌入水印演算法，利用分組編碼保存量化后的dct系數，改善了修復效果，克服了以往使用位圖矩陣的不足，具有通用性與實用性。
  18. Based on the system engineering theory, and through detailed analysis of economic techniques of the engineering work plan examples of the common used long span steel truss structures, utilizing the sequenced layer analysis, the current paper will establish the long span engineering work plan index system. also by the fuzzy mathematical principles, it builds multi - layer fuzzy complex mathematics judgment and calculate the weight coefficient of each index by application of fuzzy power duality method ; and based upon the experts investigation method builds each index judgment matrix. finally applying the current popular update system tool - power builder 8. 0 developed the " optimization system of ( construction ) fuzzy work plan " to solve and carry out the multi - layered fuzzy combination judgment ; then step on the analysis and research on the reliability of the optimal solution for further achievement of the final objective of the fuzzy optimization in selecting the construction work plan of long - span steel truss realization

    本文以系統工程學的理論為基礎，通過工程實例對常用大跨度鋼桁架結構施工方案進行詳細的技術經濟分析，運用層次分析法建立起大跨度鋼桁架結構施工方案的指標體系，利用模糊數學原理建立了多層次模糊綜合評判數學模型，採用模糊權重二元對比法計算出各指標的權重系數，並採用專家調查法建立各指標的評判矩陣，利用目前最流行的工具系統- powerbuilder8 . 0編制了《建築施工方案模糊優選系統》求解計算，進行多層次模糊綜合評判；調整權重和隸屬度，對數學模型最優解的可靠性作了進一步的分析和研究，從而達到模糊優化選擇大跨度鋼桁架結構施工方案的最終目的。
  19. Changing the depth of penetration of the three dowels results in the variation of the reflection coefficient ( s1 1 ) at the port 1. using matlab, we can calculate different equivalent impedance of port 1 which resulted from the variation of dowels depth. the purpose of my work strike up a relationship between the depth of dowels and equivalent impedance at port, thereby accomplish matching rapidly, simultaneously and stably

    在構建了自動阻抗匹配系統的基礎上，本文提出了一種新的快速匹配方法;此方法是將模擬軟體hfss和系統設計相結合，用hfss模擬系統中完成阻抗變換作用的銷釘匹配器，獲得銷釘插入波導深度變化時的埠等效特性，並將模擬得到的數據用matlab組織起來，分析銷釘插入波導的深度變化時埠等效阻抗特性的變化，來達到對調試變化規律的認識，快速的實現銷釘插入深度與反射系數間的統一。
  20. Secondly, grounded on the study of the distribution of the high external waterpressure and high geostress and the characteristic of the rock in engineering area, the paper built the elastoplastic fem numerical simulation model, and think over the procedure in tunnels excavation and the history of work of water load, and then get the relations between the different tunnels diameter, different permeability coefficient and depth of the grouting rock and the deformation, stress distribution and plastic range of the surrounding rock and support structure. finally, according to the modern design theory of tunnels construction, the particular design of country rock reinforcement and support structure are researched and presented for diversion tunnels

    接著，本文在深入研究工程區高外水壓力及高地應力分佈規律及巖體特性的基礎上，建立起高地應力、高外水壓力作用下隧洞圍巖結構非線性有限元模擬計算模型，然後考慮隧洞的開挖過程、水荷載的作用歷史，通過計算分析得出了不同洞徑、不同的灌漿圈滲透系數和不同的灌漿圈深度以及不同開挖過程與圍巖及支護結構的應力、位移和塑性區的關系。
分享友人
分享到 Line

分享到臉書