數據材料 的英文怎麼說

中文拼音 [shǔjùcáiliào]
數據材料 英文
data material
  • 數 : 數副詞（屢次） frequently; repeatedly
  • 據 : 據Ⅰ動詞1 （占據） occupy; seize 2 （憑借; 依靠） rely on; depend on Ⅱ介詞（按照; 依據） according...
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 數據 : data; record; information
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. Through the temperature measurement, we might the clear discovery each kind of building material in the building room in the physical environment difference, provide the first data for the research ecology building materials which might refer

    通過溫度測定，我們可以清楚的發現各種建築材料在營造室內物理環境上的差異性，為研究生態建材提供了可以參考的第一手數據。
  2. The gravity analysis is carried out especially for the synthetic fused silica and calcium fluoride used in 193nm lithographic objective as well as the optical elements with structural sizes of ( 200mm ~ ( 300mm. large numbers of analysis data for surface shape error are obtained by using algor finite element analysis software. then these data are plotted into curves and comparison analysis will be carried out, finally the measures and schemes for reducing gravity deformation are proposed

    因此，本論文重點對大口徑光學系統在高精度光學鏡頭裝校中，因重力變形進行了詳細的分析研究，特別針對193nm光刻物鏡系統所使用的材料sytheticfusedsilica和caleiumfluoride以及用到的結構尺寸200mm ~ 300mm光學零件進行了重力變形分析，使用algor有限元分析軟體獲得了大量的面形誤差分析數據，然後將這些數據繪成曲線進行對比分析，最後提出了減小重力變形的措施與方案，並進行了實驗，驗證了分析結果是正確的，減小重力變形的方法是有效的。
  3. Secondly, based on detailed depiction and analysis on the optimization of inventory, including analysis the demands of material and the character of stock, together with the situation of electric wire & cable company, ltd., two inventory optimizing models are developed, with the aid of liner and random optimization method - monte carle method

    然後在分析企業原材料需求和庫存特點的基礎上，根據企業的實際情況，建立了基於線性需求的庫存優化模型和基於隨機需求的庫存優化模型? ?蒙特卡羅法，代入企業各項庫存參數進行實證，並比較了兩種模型的各自的優缺點。
  4. And bulk of non - diagrammatic data is necessity in designing process for producing this table

    本方法採用access來存儲設計過程中的非圖形數據，並根據該數據庫生成主要設備和材料用量報表。
  5. This dissertation presents a hypoelastic constitutive model with four material constants in describing the mechanical behavior of granular materials under loading. analysis results of the model have good coincidence with those of triaxial experiment of the standard sand under different relative density. the model can describe the contractant and dilatant phenomena of granular materials

    提出了一種含4個材料常數的亞彈性本構模型，來描述散粒體在加載時的力學行為，本模型的分析結果與不同相對密度下標準砂的三軸實驗可較好地吻合，能反映散粒體的剪縮、剪脹現象，還對如何用三軸實驗數據來確定這4個材料常數，給出了適宜的計算方法。
  6. Concrete compressive strength and modulus of elasticity changement laws are introduced through differert cubage content injerired into the concrete, and offers some data to help research new type wall material especially to concrete cork bricks

    摘要通過在混凝土中摻入不同含量的麥秸，研究混凝土的抗壓強度與彈性模量的變化規律，為新型墻體材料，特別是混凝土多孔磚的研究開發提供有關數據資料。
  7. The numerical simulation equations of the border curves in term of and as well as the matching rules and the frequency dependence of microwave electromagnetic parameters of a broad - band homogeneous absorbing coating with a finite value of reflection loss are available. these results pointed out the direction to develop rams ". according to the radar - absorbing model, the optimized design of rams with thin - layer, light - weight, broadband and strong - absorbing is available by the simple genetic algorithms, which can effectively conduct the research work of rams to the detail. small but completely, the electromagnetic parameter ' s databases of rams that based on actual microwave absorbers have been set up, the object function has been constructed which conform to the involved goals, the adaptive coding measure is taken which extends the coding length dynamically adapting to the condition of the number of actual absorbers or the precision of thickness and absorber - volume - percentage, the decoding technique is initiated which satisfies light - weight and strong - absorbing as well as thin - layer and broadband by adopting of tracing variable restricting conditions dynamically to control total thickness. when decoding, the variable restricting conditions of thickness are dynamically traced, so gain the radar absorbing coatings of light - weight multiple - layer single - ingredient. similary, of thickness and absorber - volume - percentage, of light - weight multiple - layer multiple - ingredient. also, the rams ' demand to radar - absorb performance as frequency is met making use of the penalty function

    作為遺傳演算法的具體實施：根據本實驗室近來研製的吸波材料，建立了吸波材料的相關數據庫；構造了能真實體現「薄、輕、寬、強」優化目標的目標函數；根據材料的實際數量以及塗層厚度精度要求、吸收劑體積分數精度要求，建立了能動態擴展相應碼長的自適應編碼方法；首創了通過動態跟蹤變量的約束條件來控制塗層總厚度的解碼技術，以此實現了在不弱化寬頻、高強的吸波性能目標的同時，兼顧到薄層、輕質的使用性能要求；在解碼時通過動態跟蹤厚度變量的約束條件，實現了多層單組分吸波塗層對重量輕的要求；通過動態跟蹤厚度變量的約束條件和吸收劑體積分數的約束條件，實現了多層多組分吸波塗層對重量輕的要求；使用權重系數變化法，實現了吸波塗層的分頻段吸波性能要求。
  8. The council expressly disclaims any responsibility or liability as to firstly the accuracy or otherwise of data, information and materials contained in the study report, secondly as to any analysis, assumptions, conclusions or statements made in the study report and thirdly in respect of or arising either now or at any time in the future from the use or interpretation of the study report or omission from it

    藝發局特此聲明不論現在或將來對以下方面概不負任何責任： i本評估報告內所載的數據、資料及材料的真確性; ii根據本評估報告所作的任何分析、假設、結論或陳述; iii任何有關本評估報告的使用、闡釋及遺漏。
  9. This research is expected to use the detailed data to discuss the signification of the application rating measurement to tv dominant strategy. the first chapter gives the research purpose of this thesis and the definitions of related conceptions, and the history of rating measurement in domestic and oversea is reviewed in the second chapter

    本文首先試圖通過較為詳細的數據材料，從收視率調查現實狀況入手，進一步深入探討收視率調查在電視媒體優勢策略的應用，以及收視率調查對電視媒體優勢策略的影響及意義。
  10. We analyzed the dependence of equivalent circuit parameters of mesfet switch on material and device structure. for modeling, we designed and fabricated six set of mesfet switches with different gate width, then measured their performance and extracted switch model parameters. mesfet switch database corresponding to the mmic product line is then established, and using the dependence of switch model parameters on gate peripheral we can attain the mesfet switch performance with any gate width through parameters scaling

    移相器電路採用gaasmesfet開關作為控制元件，研究了mesfet開關等效電路參數與材料和器件結構參數的關系，設計製作了不同柵寬的六組mesfet開關，並進行參數測試和模型參數提取，建立了相應于mmic工藝線的mesfet開關模型庫；根據開關模型參數隨柵寬的變化規律，可以實現任意柵寬mesfet開關的參數定標工作。
  11. Based on energy theory, wrinkling criterion in deep drawing for axisymmetric parts is derived to take geometry parameters, friction coefficient, material properties, and the law of critical blank - holder force ( bhf ) of side wall wrinkling in the constraint condition of initial wrinkling into account

    從能量平衡原理出發，通過對屈服準則的線性化處理，推導了考慮幾何參數、摩擦系數和材料性能參數、板材皺曲時約束條件的軸對稱拉深成形過程中側壁起皺臨界壓邊力的變化規律，給出了皺曲判據。
  12. It analyses the causes to bright image movement, studies principle to compensate image movement, conforms project to compensate image movement, and designs framework to compensate image movement in the article ; to analyze and design configuration of the scanning mirror, to select matters of mirror and its support structures on the principle of consistent line expansion coefficient ; to ascertain type of moment electromotor by most rotating angle speed and most rotating moment which are required by loads in the period to take pictures, as well as by figuration size of electromotor ; to design retarder according as the electromotor parameters ; to design and optimize lightweighted mirror shapes, because the mirror is key part ; to design flexure support structure, to analyze static and dynamic characteristics of the support structure by name of patran program for validating desig n rationality ; to study function of the scanning mirror electric control system ; to test precision of the system, the results indicate the rationality of design of the scanning mirror system

    本文通過分析像移產生原因、研究像移補償原理，確定像移補償方案，並根據像移補償原理設計補償機構；分析與設計掃描反射鏡系統結構，根據材料線膨脹系數一致原則，選擇反射鏡及其背部支撐的材料；由掃描反射鏡在擺掃周期內的最大擺掃角速度確定力矩電機的額定轉速，根據負載力矩確定電機的額定轉距，綜合電機外型尺寸等因素，確定執行元件? ?電機的型號；根據所選電機的參數指標，設計1 ： 6速比的減速器；利用patran軟體對掃描反射鏡系統中的關鍵件? ?反射鏡進行輕量化設計與優化；設計反射鏡柔性支撐結構，並通過軟體分析支撐結構的力學特性，驗證反射鏡柔性支撐結構設計的合理性；從原理上研究掃描反射鏡控制系統功能；進行系統精度測試，測試結果表明掃描反射鏡系統設計的合理性。
  13. That is the identification of material parameter is done through the true deformation increment in the loading stage before, loading increment, and the stress state by artificial neural networks, after this, we can get loading increment for the next deformation stage by the artificial neural networks trained by stress stage, target deformation increment and the identified m value

    即首先根據上一步加載材料的實際應變增量、所加應力增量以及材料所在的應力狀態識別出材料物性參數m值，然後再根據材料加載后的應力狀態、目標應變增量以及識別所得m值，由訓練好的識別應力增量的人工神經網路產生應加的載荷增量。
  14. The stability, rheology, chain structure and consecutive medium model in magnetorheological fluids are analyzed. according to the contribution of shear stress and normal pressure in polishing zone, the quantificational machining model of mrp is presented. as an example of plane workpiece, the influences of machining parameters on removal rate and surface roughness in mrp are studied

    5 、磁流變拋光（ mrf ）是超光滑光學表面的一種新型加工技術，本文從mrf的磁、力學性質出發，研究了磁流液的穩定性、流變效應、鏈化結構和連續介質模型；根據拋光區內剪應力、正壓力的分佈特徵，提出了mrf的定量加工模型；然後以平面工件的磁流變拋光為例，揭示了工藝參數對材料去除率和表面粗糙度的影響規律。
  15. Tissue sections from every animal were double - labeled with the antibodies of map - 2, cox - 2, gdnf, caspase - 3 and either the neuron - specific antibody neuronal nuclear protein ( neun ) or the astroglial - specific marker glial fibrillary acidic protein ( gfap ). we carried out a series of research to explore the effects and mechanism of map - 2, cox - 2, gdnf, caspase - 3 during tbi and trie d to provide some useful theory basis for both the treatment of tbi in the practice and forensic medicine

    並通過上述指標分別與神經元特異性標志物神經元核蛋白（ neuronalnuclearprotein ， neun ）和星形膠質細胞特異標志物膠質纖維酸性蛋白（ glialfibrillaryacidicprotein ， gfap ）進行免疫組織化學雙染色，探討腦損傷后神經元及神經膠質細胞反應性變化情況及其分子生物學機制，以期為腦損傷研究提供有益的數據材料，也為以上指標在法醫學實際檢案的應用提供必需理論依據。
  16. Then, in order to meet the need of relevant parameter calculating conveniently, basing on the principium of the material mechanics, the cube - parabola method in calculating bending strength parameter number is provided

    同時為適應有關參數數值計算需要，根據材料力學基本原理，提出彎曲強度參數計算中的立方拋物線法。
  17. Upon the request of the buyer, the supplier will provide the buyer ( and any related company specified by it ) with access to and copies of any data, materials or information provided to a government relating to the goods, any component or part of the goods, or any materials or substances used in the goods or in connection with their production, including any test, manufacturing, field performance or warranty data

    供貨方提供給政府的關于產品或一部分產品，或在產品中使用或與該產品關聯的任何材料或物質的任何數據，材料或信息，包括任何試驗，生產，野外特性或質保數據，在買方要求下，供貨方應允許買方（以及買方確定的任何關聯公司）進行復制。
  18. According to these results, the electronic conductivity, seebeck coefficient, thermal conductivity and figure of merit of materials are computed. the results are consistent with experimental measurements

    根據所求出的有效質量、載流子濃度估算了上述三個模型的電導率、熱導率、 seebeck系數和材料的熱電品質因子，計算結果與實驗測量值的變化趨勢一致。
  19. And the data materials are from the study of profession qualification credentials system in vocational school and the study of urbanization of villages in chongqing which the writer has participated in it this year

    在調研中參考採用了筆者2003年初參加的全國職業學校實行職業資格證書制度調研課題重慶分課題和重慶市加快農村富餘勞動力轉移調研專題的相關數據材料。
  20. The temperature response traces of electromagnetic parameters of absorbing materials are obtained. the measurement error is analyzed in this paper. the error sources are defined according to measurement theory and the value of each error source is obtained through experiment or theory analysis

    根據測試原理確定誤差源，由試驗或理論分析的方法確定各個誤差源的值，根據測試原理通過誤差理論分析得到誤差計算公式，最後對測試結果進行了測試誤差計算，並對其他電磁參數的材料進行了測試誤差模擬計算。
分享友人
分享到 Line

分享到臉書