方塊造型 的英文怎麼說

中文拼音 [fāngkuāizàoxíng]
方塊造型 英文
cube mould
  • 方 : Ⅰ名詞1 （方形; 方體） square 2 [數學] （乘方） involution; power 3 （方向） direction 4 （方面） ...
  • 塊 : 名詞（古時佩帶的玉器） penannular jade ring （worn as an ornament in ancient china）
  • 造 : Ⅰ動詞1 （做; 製作） make; build; create; produce 2 （假編） cook up; fabricate; concoct 3 [書面語...
  • 方塊 : diamond; block
  • 造型 : 1 （創造物體形象） modelling; profiling; mouldmaking 2 （創造出來的物體形象） model;mould3 [機械...
  1. From two different sides of external environment characters and the self - trait, a kind of catenulate development mode driven by great enterprises and other one represented by wintelism producing way have been presented. in addition, an ipo model and cycle - driving model, and platform & quasi module model have been referred, and a network - based cooperation modularization development model has been built to promote enterprises develop too. at last, as a case in point of the theoretical model, the author has introduced the process of citrus ferment dreg, and the preparing of processing equipment, and their appliance effect in a practice

    研究內容主要包括:從反映產業外部環境和自身特點兩個方面，提出了農產品加工龍頭企業驅動的鏈環發展模式和以「溫特爾主義」生產方式為代表的發展模式;構建了農產品加工裝備產業層面、行業層面、產品研發製造層面的ipo模型、循環驅動模型和「平臺+準模塊」模型，在產品研發製造的「平臺+準模塊」發展環境引導下，建立了促進農產品加工裝備製造企業發展的基於網路的協同模塊化發展模型。
  2. Third, the traditional method of the establishment of disperse systems is analyzed ; the method of step establishment model is used. this method makes the establishment of disperse systems easy, and can minish the complex of makes the establishment of disperse systems

    再次，分析了離散事件系統的建模方法，提出了對象模塊化分級建模方法，該方法分三步對柔性製造系統建模:建立系統的靜態對像模型、動態行為模型和調度決策模型。
  3. Carry close market survey, in machine of decelerate of ceaseless and perfect combined - type solid products tastes quality while, the company is affirmatory with modular machine of decelerate of planet of gear case of machine of decelerate of hard tooth flank, large burden, high strenth and wind - force generate electricity gear case is core product, replace in order to import develop way for you, insist to specialization, homebred the way that the high - quality goods that turn makes

    通過嚴密的市場調研，在不斷完善組合式減速機實物產品質量的同時，公司確定以模塊化硬齒面減速機、大型重載齒輪箱、高強度行星減速機和風力發電齒輪箱為核心產品，以進口替代為發展方向，堅持走專業化、國產化的精品製造之路。
  4. Following the research route of mend with study and development with creation, give the definition of risk and the methods of risk identifying, divide the risk attitude into risk loving, risk neutralism and risk avoiding, point out the importance of enhancing the risk consciousness for lightning hazard, and summarize the mechanisms of lightning hazard the theories and methods of risk assessment for lightning hazard. provide a set of risk assessment parameters for lightning hazard, which includes lightning times n, hazard probability p, hazard loss d, hazard risk r and protection efficiency e, and give the definition, decisive factor, value method and value scope of each parameter. establish a risk assessment model for lightning hazard which includes lightning hazard base module, lightning hazard probability module, lightning hazard loss module, lightning hazard accepted risk module, lightning protection cost module, correcting coefficient module, lightning hazard risk module, and lightning protection class and efficiency module

    遵循借鑒改造和發展創新的研究思路，給出了風險的定義和風險識別的方法，將風險態度分為風險喜好型、風險中庸型和風險逃避型，指出了提高雷電災害風險意識的重要性，總結了雷電災害的作用機制和雷電災害風險評估的理論與方法；提供了包括雷擊次數n 、雷災概率p 、雷災損失d 、雷災風險r和雷電防護級別與防護效率e等5類基本參數的雷電災害風險評估參數體系，並給出了各個參數的定義、參數的決定因素和取值方法以及取值范圍；設計了包括雷電災害基礎模塊、雷電災害概率評估模塊、雷電災害損失評估模塊、雷電災害允許風險評估模塊、雷電防護成本評估模塊、校正系數模塊、雷電災害風險評估模塊、雷電防護級別與效率分析模塊等8個模塊的雷電災害風險評估模型，評估模型以iec61662的評估模型為基本參考，以雷災損失d為中心，把雷災風險劃分為經濟雷災風險r _ e和人身雷災風險r _ l ，並對r _ e和r _ l分開單獨處理。
  5. Based on analysis and compare of all kinds of precept - sorting of feature of plastic product for the different structural plastic product, a 3d feature library of plastic product was built on the platform by integrating feature - modeling technique with parametric technique. the feature schleps its information of non - geometry by database - externed technique of the entity. after building the database of plastic material, the module of choice of plastic material is developed by technology of odbc

    針對不同結構類型的塑件，在全面分析、比較塑件特徵分類的各種方案的基礎上，採用三維特徵建模技術和參數化技術，建立了注塑產品的三維特徵庫；應用實體擴展數據庫技術，使特徵攜帶非幾何信息；再在建立塑料物性數據庫的基礎上，採用odbc技術，開發了塑料材料選擇模塊；通過塑件特徵的調用和人機交互輸入參數的方法進行塑件三維造型，再把塑件的三維實體和塑件的非幾何信息結合起來，生成塑件全信息模型。
  6. The paper gives a particular analysis on the core module of the option - adjusted model, that is the module of making interest scenes and the module of option characteristic behavior. combining the facts of our country the paper analyzes the applicability of the model. the paper simulates the process of calculating the effective duration and convexity with hull and white ’ s interest term structure and trinomial interest rate tree model

    文章著重分析了期權調整利差的兩個核心模塊，即利率情景製造和期權特徵行為模塊以及其中涉及的模型在我國的適用性，並用hull和white的利率期限結構和三叉樹的方法模擬演算了一項具有隱含期權的假設資產的有效持續期和有效凸度的求解過程。
  7. The paper presents several aspects in partition rectification and visualization of raster image. adopt technology of visualization for scientific calculation, vector diagram of deformation 、 contour chart of deformation and drawing of three - dimensional are realized. delaunay tin in view of deformation feature is constructed on base of selected grid control points and methods and mathematical models for partition rectification are realized based on the delaunay tin. software of geometric rectification for large scales are realized and applied in project

    本論文針對柵格影像的變形可視化及分塊糾正展開研究，取得了以下幾方面的研究成果：一、採用科學計算可視化技術，繪制變形矢量圖、變形等值線圖和三維效果圖，實現了柵格影像變形特徵的可視化；二、提出了在格網控制點（ gcp ）數據基礎上選擇性構造顧及變形特徵的delaunay三角網，並基於構造的三角網實現了分塊糾正的方法和數學模型；三、採用vc編制了影像幾何糾正軟體，實現大比例尺掃描地形圖的糾正，並在工程中得到應用。
  8. A compensatory approach to software and hardware used by microprocessor was applied to the intelligent solid pressure transducer, which not only achieved the intelligentization of pressure sensor, but also improved the sensor ' s accuracy. this will surely accelerate the development of instrument towards the direction of multifunction, high degree of accuracy, numeralization, intelligentization, modularization and miniaturization so that measurement system will be further improved

    為此本課題研究固態壓力傳感器的製造技術，通過微處理機的軟體和硬體的補償方法來提高傳感器的精度，實現壓力傳感器的智能化，促使儀表向多功能、高精度、數字化、智能化、模塊化、小型輕量化方向發展，近而得到一個較為完善和理想的測控系統，提出了一種差壓傳感器智能化設計方案。
  9. The content of this paper is arranged as foll owing : chapter 1 introduces the concept of credit, credit risk and credit assessment, as well as the history and development of credit assessment ; chapter 2 introduces the history of ai technology, and the background of expert system and neural network. characters and disadvantages of expert system and neural network are presented respectively and the necessity of combining expert system and neural network is lightened ; chapter 3 shows the process of dealing with sample data, including the treatment of exceptional data and factor analysis, and puts forward the concrete framework of the mixed - expert credit assessment system ; chapter 4 introduces concept of object - oriented technology, and constructs object model and functional model after analyzing the whole system. it also illustrates the implementation of concrete classes by an example of rule class and the inference algorithm in the form of pseudocode ; chapter 5 introduces the structure of the whole system, the major functional models and their interfaces, and the characteristic of the system is also generalized ; chapter 6 summarizes the whole work, and points out the remaining deficiencies as well as the prospective of this method

    本文具體內容安排如下：第一章介紹了信用、信用風險、信用評價的概念，回顧了信用評價的歷史、發展和現狀，並綜合各種信用評價模型，指出這些模型各自的優缺點：第二章簡單描述了人工智慧技術，著重介紹有關專家系統與神經網路的基礎知識，通過總結它們的優缺點，指出結合專家系統與神經網路構造混合型專家系統的必要性；本章還介紹了神經網路子模塊的概念，提出了混合型專家系統的一般框架與設計步驟：第三章對樣本數據進行處理，包括異常數據的剔除、因子分析等，提出了信用評價混合型專家系統的具體框架結構，介紹了系統知識庫的主要部分、基於優先級的正向推理機制的流程、以及基於事實的自動解釋機制的具體實現方法；第四章介紹了面向對象技術，進而採用面向對象對信用評價系統進行分析，建立了對象模型和功能模型，並在此基礎上，採用c + +語言以規則類為例說明系統中具體類的實現，用偽代碼的形式描述了推理的演算法；第五章描述了整個系統的結構，對系統主要功能模塊和界面進行了介紹，並總結系統的特點；第六章總結了全文，指出本文所構造系統存在的不足以及對將來的展望。
  10. Third, using the powerful fea software, ansys, it was studied how to construct the modules with high dynamic performances for nc machine tools on the foundation of the dod theory of us and bf sizes ; and the dod of the bed of nc machine tools and gantry columns were successfully accomplished, which prove that the dod theory of us and bf is feasible and efficient

    3 .研究了在大型有限元分析軟體ansys平臺上，利用基於元結構和框架尺寸優化的理論，如何構造出動態特性優良的數控機床模塊。通過基於元結構和框架尺寸優化的方法，成功地對數控機床床身和龍門式立柱進行動態優化設計，驗證了基於元結構和框架尺寸優化的機床構件動態設計及大件結構創成是可行性的，且具有一定的高效性。
  11. On the other side, based on research on noncircular surface grinding features, this deissertation designs the data structure of simulation driver, then, applies interpolation theory to design the grinding motion simulation module and researches all sorts of cases on constructing the solid swept of grinding wheels in the process of noncircular surfaces grinding, finally, designs nc codes verification simulation module by using design model - based verification technique

    在實體模擬技術方面，詳細研究了非圓曲面磨削加工的特徵並設計了對應的模擬驅動數據結構;應用插補原理設計了體現加工速度的運動過程模擬模塊;詳細研究了非圓曲面磨削加工中砂輪的相對和絕對運動掃掠實體的構造，並採用基於精確實體設計模型的驗證方法構建了數控代碼的模擬驗證模塊。
  12. The fir trees, standing firm and steady, are painted with the simple strokes of a self - taught painter. the green lawn on the slope perhaps a reflection in the lake is expressed not in realistic form, but as a huge patch of color boldly applied from left to lower right to create an incredible dynamism

    奮斗大膽強烈的用色，遠近距離之處理顛覆了傳統視覺概念杉樹造型穩定中帶有幾分素人畫者的拙趣坡地上的草茵或許是湖光倒影非以具象展露，而以大面色塊由左向右下方作大筆揮灑，充滿無比的動感。
  13. Under the background of the research work - " expert system of hydraulic brake system design for saloon car, small and medium passenger car " for nanjing yuejin automobile group, in this paper, a set of special cad software for vihicle brake was developed in which the researchful object was brake, . the cad supporting software was pro / engineer and the developing language was vb. the project of discreted brake was raised and 3d graphic parametric library of typical parts and assemblies was established. 3d solid modeling and parameter - driven between dimensions and relations were accomplished using pro / engineer

    本文以南京躍進汽車集團的橫向課題「轎車、中小型客車液壓制動系設計專家系統」為背景，以制動器為研究對象，以pro engineer為cad支撐軟體，採用vb語言，開發了一套汽車制動器專用cad系統；提出了制動器離散化方案，構建了參數化的制動器典型零部件三維圖形庫，使用pro engineer實現三維實體造型以及尺寸與關系的參數化驅動；圖形庫系統採用參數化圖庫引用、管理機制並擁有一個開放的擴充介面；研究了pro engineer二次開發模塊pro toolkit ，解決了同步模式下定製程序界面的問題，並實現與pro engineer的通信；建立了制動過程數學模型，推導了制動方程式並給出相關解法，編制了制動器數值模擬分析程序；構建了制動器設計資料庫。
  14. Scientific computation visualization interactive virtual reality computer dynamic simulation etc., to study thoroughly and carefully on critical technologies such as mixed - language programming simplification of scene models displaying realistic image and animation of 3d scene models and so on in this dissertation, the methods to build scene models were studied and applied to develop a dynamic simulation system of 3d railway scene based on this idea, the major study contents and results can be summarized as follows : 1 ) mixed - language programming can complement each other between different programming languages and the method has a general significance and can become popular many computation models including development of dtm optimum of dtm and reorganization of dtm were developed with fortran language in order to use the ripe codes, the dissertation succeeded in integrating the developed fortran codes to the visual c + + environment and achieving the course of mixed - language programming 2 ) the methods to build scene models for 3d location design were discussed in the dissertation and the development and animation of scene models had been realized by applying synthetically those technologies such as computer graphic computational geometry and geometrical modeling and computer dynamic simulation etc, and adopting opengl 3d graph library then achievement was got by using the technology of 3d visualization to livingly express design results 3 ) combing with the concerned study and development projects, adopting vc + + as development tools and in the light of those theories and algorithms stated in this dissertation, a software, which could build scene models with realism for 3d railway location design, in the name of " the dynamic simulation system of 3d scene of railway " was developed., the correctness was proved by using the software to build the 3d scene models and achieve their animation of suining - chongqing railway and yunnan - xizang railway

    本文綜合利用計算機圖形學、科學計算可視化、人機交互、虛擬現實、計算機動態模擬等理論和技術，針對混合語言編程、真實感圖形繪制以及三維景觀模型的動畫驅動等關鍵技術，進行了深入細致的研究，從而探討了建立逼真景觀模型的方法，並基於本文提出的方法研製了一個鐵路線路三維景觀動態模擬系統。基於這一思想，本文主要研究內容及研究成果如下： 1 ）混合語言編程可以實現語言優勢互補，具有普遍意義。針對數字地面模型的建立、優化、重組等計算模塊是成熟的fortran程序代碼，本文成功實現了vc + +與fortran語言的混編； 2 ）緊緊圍繞三維選線設計中景觀模型的建立方法展開研究，綜合利用計算機圖形學、計算幾何及幾何造型學以及計算機模擬技術，採用opengl三維圖形庫，實現了景觀模型的建立以及動畫驅動，使得三維可視化技術成功應用於選線設計成果的三維直觀表達； 3 ）結合有關科研課題，利用vc + +開發工具，以本文所述的理論和演算法為基礎，研製和開發了一個建立三維選線設計逼真景觀模型的系統軟體- - 「鐵路線路三維景觀動態模擬系統」 。
  15. On the basis of being familiar with the functions of unigraphics system, the thesis elucidates the work manners about the cad software sustaining the draw die design. the theory and realization about the cad function are also discussed. to realize the target of raising the quality and the efficiency of the die design the theory of the stpart & feature library on the basis of “ unigraphics ” which has the function of establishing the characterized 3d parametric solid model has been developed

    論文依據unigraphics系統有關模塊和功能，探討了cad軟體支持模具設計過程的工作方式，研究相應輔助設計功能的原理和實現方法;結合系統開發平臺的功能，為實現提高模具設計質量、設計效率的目標，在基於特徵的三維參數化實體造型系統unigraphics上開發了拉延模標準件庫及特徵庫。
  16. In order to realize the function of this system, a virtual parts library was established with solidworks and three - dimensional parameterized modeling was realized at the same time based on the practical part prototypes, which have been used in mechanism kinematics scheme design experiments in the physical laboratory

    首先，以機構運動方案設計實驗用到的實物零件為原型，用solidworks軟體對各類零件進行了三維參數化造型，建立了一個虛擬零件庫。然後，根據實現系統功能的需要編制了相應的程序模塊。
  17. This paper integrates theory with practice, follows the principles and methods of software engineering, setup the constitutes frame of nc machine servo feed cad system, and finishes the research and development of four modules of servo feed cad system, such as graphical user interface module, design and compute module, database management system and graphics system, by using object orient programming ( oop ) technology, borland c + + builder 5. 0 database engine ( bde ), parametric feature model technology and 3d solid modeling technology

    本文理論聯系實際，遵循軟體工程的原則和方法，創建了數控機床伺服進給cad系統的總體框架。它採用了面向對象編程（ oop ）技術、 borlandc + + builder5 . 0數據庫引擎（ bde ） 、參數化建模技術和三維實體造型技術，完成了伺服進給系統的四大部分功能：即圖形用戶界面模塊、設計計算模塊、數據庫管理系統模塊以及圖形系統模塊。
  18. The shape designing and structure designing for solid door is studied. the system can well integrated with other functional module in the whole furniture designing system and this solve the problem of information share and exchange. correlated departments can cooperate with each other well

    3 .研究了實木門的造型設計和結構設計一體化方法，實現了與整個傢具設計系統的其它功能模塊的集成，解決了實木門設計過程中的數據共享與交換問題，為企業內部各個相關部門之間的并行、協調工作創造了條件。
  19. The paper recommends some usual softwares for making a three - dimensional animation. by comparing them in three aspects, building 3d models, functional animation and drawing, we elaborated their characteristic individually

    介紹了幾種常用的製作三維動畫的工程軟體，並在造型模塊、動畫模塊及繪制模塊三大模塊方面對這些工程軟體作了一番比較，闡明了這些工程軟體的各自的特點。
  20. On the basis of analyzing and studying the structural and functional characteristics of the new type energy - efficient heat exchanger, this dissertation adopts object - oriented programming theory and design method, using 3d modeling and assembling software mdt as developing platform, and activex automation interface technology and vba integrated development environment as aided method, to study and develop the assembly module of new type energy - efficient heat exchanger. the dissertation mainly discusses, studies and works innovationally as the following aspects : 1. this dissertation has discussed and studied the theory and technology of developing assembly module of new type energy - efficient heat exchanger, including the object - oriented theory, the activex automation interface technology and their utilization technology in the

    本文所做的工作，集中於換熱設備三維cad數字化建模和裝配模擬研究，並在分析研究新型高效節能換熱設備的結構和功能特點的基礎上，採用面向對象的編程思想和設計方法，以三維造型和裝配軟體mdt為開發平臺，藉助于activex自動化界面技術和vba集成開發環境，進行新型高效節能換熱設備裝配模塊的研究與開鄭州大學碩士學徒論文發，論文主要針對以下幾個方面進行了論述、研究和創新性工作: 1 、論述和研究了新型高效節能換熱設備裝配模塊開發的相關理論和開發技術，包括面向對象理論、 activex自動化界面（ activexautomationinterface ）技術及其在新型高效節能換熱設備裝配模塊中的應用、裝配模型的概念和建模理論、 mdt的vba二次開發技術等。
分享友人
分享到 Line

分享到臉書