條粘法 的英文怎麼說

中文拼音 [tiáoniánfǎ]
條粘法 英文
striadhibiting method
  • 條 : Ⅰ名詞1 （細長的樹枝） twig 2 （條子） slip; strip 3 （分項目的） item; article 4 （層次; 秩序; 條...
  • 粘 : 粘動詞（粘附） glue; stick; paste; adhere to; bond
  • 法 : Ⅰ名詞1 （由國家制定或認可的行為規則的總稱） law 2 （方法; 方式） way; method; mode; means 3 （標...
  1. In order to improve the adherence of the film to the substrate and the repeatability of synthesis, we invent a three - step approach, which comprised the steps of turbostratic boron nitride ( tbn ) turning into rhombohedral boron nitride ( rbn ) as the first, rbn turning into cbn as the second and deposition as the last

    基於對bn薄膜相結構的分析和優化的沉積條件，制備出立方相含量高達95 %的cbn薄膜。為了改善制備的可重復性和粘附性，提出了三步沉積方法，即將成核過程分成tbn轉化為rbn和rbn轉化成cbn的兩步，加上之後的沉積過程。
  2. Footwear - test method for stiffeners and toepuffs - bondability

    鞋靴.補強膠條和皮鞋包頭的試驗方法.粘合程度
  3. Footwear - test method for stiffeners and toepuffs - bondability iso 20863 : 2004 ; german version en iso 20863 : 2004

    鞋靴.補強膠條和皮鞋包頭的試驗方法.粘合性
  4. 4. with visco - elastic boundary of soil considered, the eigenvalue equation in frequency domain of soil dynamic equilibrium equation falls into a complex transcendental equation. in course of seeking its solution, based on argument principle and contour integral, with the aid of matlab, two numerical algorithm combined with the corresponding procedures for solving transcendental equations in a complex plane is developed by the author

    4 、由於考慮了土體的粘彈性支承邊界條件，使得其動力平衡方程在頻域內的固有值方程為一復數超越方程，為了求解該方程，筆者基於幅角原理和閉合曲線積分，結合matlab ，提出了復平面上超越方程的兩種數值解法，並編制了相應的程序。
  5. Standard test method for resistance to deformation under static loading for structural wood laminating adhesives used under exterior wet use exposure conditions

    室外潮濕條件下結構木材用膠粘劑在靜負荷下抗變形性的標準試驗方法
  6. Standard test method for fiber cohesion in sliver and top in static tests

    靜態試驗條件下紗條和毛條中纖維粘附力的標準試驗方法
  7. Sampling and examination of bituminous mixtures for roads and other paved areas - methods for determination of the condition of the binder on coated chippings and for measurement of the rate of spread of coated chippings

    道路和其他鋪砌區用瀝青混合料的取樣與檢驗.測量塗石屑上粘合劑條件和粘合劑攤鋪率的方法
  8. According to the special shape and operate requirements of the torpedo, the structure and moulding process of the torpedo shell are established, in which the body and overlay block with grooves are moulded by fiber winding, and close moulding respectively with the adhesive by limited stop compression. in the light of the selection of raw material system, composite system with outstanding performance are defined, based on which the mechanical properties are tested., with the overall consideration of structural characters and design demands, the main factors which may have effects on the strength and stability ( including stiffness section dimension, stiffeners space, skin thickness and skin lay angle ) is optimized one by one for the structure design parameters on the base of the fem model of skin, stiffness and layover block by fem. as a result, the prototype with 1 : 1 proportion and its structure and lay optimization design are completed. the moulding technology for polyurethane foam moulding the stiffened shell is obtai ned in terms of the design, manufacture moulding, experimental mould and tooling

    依據在研產品特殊的外型結構和使用要求，確定了該型號水雷復合材料殼體的具體結構形式和復合成型工藝路線，即由纖維纏繞工藝成型主體異形件，閉模成型帶通槽外貼塊，用限位加壓工裝實現粘接的工藝路線；通過對原材料體系的篩選，確定了綜合性能較好的復合材料體系，以此為基礎進行了力學性能測試；運用有限元方法，建立了蒙皮、筋條和外貼塊的分析模型，綜合考慮結構特點和設計要求，對影響結構強度與穩定性的主要因素（包括筋截面尺寸、筋間距、蒙皮厚度、蒙皮鋪層角度）分別進行了結構設計參數的優選，最終完成了復合材料異形耐外壓殼體1 : 1樣件和縮比實驗件結構及鋪層優化設計；完成了聚氨酯泡沫胎成型內置加筋殼體的成型工藝技術研究；對縮比件進行外壓性能測試，並給出了應力、應變測試結果。
  9. We not only carefully discuss the clay ' s nature, its anti - sheer intension, the exponents of anti - sheer intension and the water pressure of the hole in clay, but also study varies analysis methods such as sweden strip method, stability coefficient method and bishop ' s simplified method of arc slice. finally, we thoroughly discourse upon the method of none arc slice in slope analysis

    論文中對粘土的抗剪強度特徵、粘性土抗剪強度指標的選擇應用和孔隙水壓力等問題進行了分析，同時對分析土坡穩定性的瑞典條分法、穩定數法、圓弧滑動面的畢肖普法以及對非圓弧滑動面的土坡分析方法進行了細致深入的闡述和分析。
  10. By means of the finite element inverse analysis, based on stress - strain theoretical equations of the elastoplasticity and viscoelasticity - viscoplasticity, the change of the valley - side margin stress distribution during original state, the condition of human cutting a terrace of building houses in the loess slope, and the condition of cutting the top of loess slope is elucidated

    3 .基於粘彈?粘塑性理論的本構方程，運用有限元方法進行反演分析，闡明了宅基邊坡谷緣在天然條件、斬坡建窯條件下和削坡條件下的應力場變化特點。結果表明，谷緣在斬坡建窯條件下拉張應力和剪切應力增大是導致崩塌產生的根本原因。
  11. Adhesives - determination of dynamic resistance to cleavage of high - strength adhesive bonds under impact conditions - wedge impact method

    粘合劑.在沖擊條件下測定高強度膠粘劑耐動態劈裂性.楔形物沖擊法
  12. The method of preparing the uniform coating, the techniques of thermal bonding and hydrogen plasma treatment was investigated experimentally. the optimum coating method and technological parameters was summarized

    重點探索了塗覆金剛石納米塗層的方法、實現金剛石與金屬鈦的熱粘接工藝以及氫等離子體處理的工藝參數，篩選出了在本實驗系統中的最佳方法和工藝條件。
  13. The flow of turbine in design and off - design state was simulated by the method of numerical simulation of 3 - d viscous flow, and the flow mechanism in design and off - design state was studed

    主要利用三維粘性非定常數值模擬的方法對設計狀態和高背壓條件下透平葉片內部的流動進行模擬，並分析了設計狀態和高背壓條件下非定常流動機理。
  14. The flow equations are solved using finite difference technique. using body - fitted curvilinear coordinate system treated the boundary conditions. by iteratively solving the flow governing equation and the blade equation, the design of axial flow pump impeller in the quasi - three - dimensional rotational flow can be performed according to the angular momentum distribution, the blade which was designed in the lifting method, flow channel and the blade thickness given

    其次在流動無粘性、不可壓及考慮葉片厚度的條件下，依據葉輪內的流動特性，推導了葉輪內三維流動周向平均流動控制方程以及葉片方程；在貼體坐標系中，採用有限差分法求解流動方程和葉片方程；在採用升力法設計出的葉片作為初始葉片、給定葉片速度矩分佈、葉片厚度分佈和葉輪軸面流道幾何形狀條件下，迭代求解流動控制方程及葉片方程，實現了軸流泵葉輪的準三維方法設計。
  15. Firstly, under the condition of constant viscous dissipation, the field coordination equation was induced for steady laminar convective heat transfer by the conditional variational principle based on the extremum principle of heat transport potential capacity dissipation

    首先在粘性耗散一定的條件下以熱量傳遞勢容耗散取得極值為優化目標，運用變分方法導出了層流對流換熱場協同方程。
  16. Standard practices for resistance of adhesives to cyclic laboratory aging conditions

    膠粘劑耐周期性實驗室老化條件的標準試驗方法
  17. Based on the method of limitation analysis of soil plasticity, researching from the soil arching mechanism of soil - nailing retaining, the upper limit of the critical height of soil - nailing slopes and the minimum horizontal length from coping of the potential slide surface to the edge of deep excavation are obtained through the analysis to weight of soil and vertical loading and the mechanism of soil and soli - nailing acting reciprocally

    摘要基於土的塑性極限分析方法，以均質土坡為例，從土釘支護結構的準粘聚力理論出發，綜合考慮土體自重、坡頂的條形荷載，以及土釘與土體的相互作用的機理，推導出了土釘支護的臨界高度的上限值和潛在螺旋曲線滑動面在坡頂方向距基坑邊沿的最小水平距離解析表達式，可供基抗支護設計參考。
  18. Comparison of flow regimes is made for different reynolds - number flows and mesh refinement. the current study for the laminar flow over a backward - step facing step explores the influence of the sidewall on the development of three - dimensional flow for re > 400. meanwhile, this paper attempts to study on some important aspects of time - dependent incompressible viscous flow

    本論文的主要研究成果有： 1 、評述了三維粘性流動數值模型的研究現狀，分析了各數學模型的建模思想及相應的數值計算方法，提出了當前存在的高精度的數值計算方法和邊界條件的適定性問題。
  19. Through the bonding tests and the theory analysis between the advanced composite glass sheets and the concrete under the general load - carrying condition, the iterative load - carrying condition, the freeze - thaw action, and the defective bonding, the calculative model has been established, and the numerical value of fibre sheet strain under different load - carrying has been confirmed. the bond strength calculative expressions for the concrete bonded with glass fibre sheet under the pull - shear and the bend load - carrying conditions have been established. the author put forward the decreasing coefficient and the calculative expressions for the influence of reinforce effect by the non - effective area and the calculative expressions for the influence of the freeze - thaw action on the carrying capacity of the concrete beams

    本文採用美國泰扶高強復合玻璃纖維布以及與之性能相當、由南京玻璃纖維研究院自行研製開發的egfw430型玻璃纖維布兩種材料，通過在靜載、重復荷載、凍融及有缺陷粘結條件下的高強玻璃纖維布與混凝土粘結性能的試驗研究與理論分析，建立了玻璃纖維布-混凝土的粘結計算模型，明確了不同受力狀態下纖維布應變的設計取值，提出了玻璃纖維布-混凝土抗剪粘結強度的計算公式;確定了考慮非有效粘貼面積對加固效果影響的折減系數;給出了凍融循環次數引起承載力下降的插值計算方法;並驗證了重復荷載作用下玻璃纖維布與混凝土良好的粘結性能。
  20. So knowing the distributing law of the strain field and how the strain field changes with the actuator ' s size is necessary in this text, electronic speckle pattern interferometry is used to test different strain fields produced by bonded actuators with different size. after the fringe is thined, its spine is got. based on the theory of speckle metrology, the displacement from the fringe is got, at last the strain field and how the strain field changes with the actuator ' s size is got

    本文用電子散斑干涉法對不同尺寸的粘貼型壓電驅動器的誘發應變場進行了實驗研究，將所得的干涉條紋進行細化處理，得到干涉條紋的骨脊圖，根據散斑干涉計量術的原理對干涉條紋骨脊圖進行數值計算，得到誘發應變場的位移圖以及粘貼型壓電驅動器的尺寸變化對誘發應變場的影響。
分享友人
分享到 Line

分享到臉書