模擬分立 的英文怎麼說

中文拼音 [mónǐfēnlì]
模擬分立 英文
anlg disc analog discret
  • 模 : 模名詞1. （模子） mould; pattern; matrix 2. （姓氏） a surname
  • 擬 : 動詞1. （設計; 起草） draw up; draft 2. （打算; 想要） intend; plan 3. （模仿） imitate
  • 分 : 分Ⅰ名詞1. （成分） component 2. （職責和權利的限度） what is within one's duty or rights Ⅱ同 「份」Ⅲ動詞[書面語] （料想） judge
  • 立 : 動1 （站） stand; remain in an erect position 2 （使豎立; 使物件的上端向上） erect; stand; set up...
  • 模擬 : imitate; simulate; analog; analogy; imitation; simulation模擬艙 boilerplate; 模擬電路 [電學] circ...
  1. Based on the analysis of mechanism for joint region, the " frame - wall " and " aslope compression stub column " mechanical models and yielding patterns of core zone of the joints are set up. the shear load - carrying formulation for joint core zone is also given in terms of plastic ultimate analysis. and then, the comparisons between the formulas given in this paper and that of chinese design code ( draft ) and nonlinear fem as well are presented

    對節點核心區的抗剪，通過受力機理的分析，建立了鋼「框架剪力墻」加混凝土「斜壓短受力體系及其屈服機制，根據塑性極限分析，給出了節點核心區抗剪承載力計算的迭加公式， 《規程》公式和非線性有限元近似模擬分析結果進行了比較。
  2. Various sensors that are besotted in the 3d world through vrml can effectively sense all kinds of operators " behaviors ; java byte codes that are besotted in the interface between vrml and java through the " script " node can finish difficult tasks. so the alteration can be concluded as follows : operators touch parts of the shelf, and the java byte codes execute the relative function, finally results are reported to the operators. ( 3 ) through detailed studying the working function of the throttling experiment, i constructed a mathematical model of the experiment and simulated the model

    Vrml可以在瀏覽器環境中為3d實驗臺模型添加多種感知器，能夠良好地感知操作者的各種意圖；在vrml和java技術的介面中，可以利用java程序代碼來完成一些復雜的任務，從而實現了實驗的交互：實驗者感知實驗臺的各種儀器，程序完成相應的任務，然後返回相應的結果； 3 ）仔細研究了節流調速實驗的液壓迴路原理，對實驗過程建立了相關數學模型，進行模擬分析並獲得了模擬結果，實現了基於模型驅動方法的虛擬實驗； 4 ）實驗臺遠程訪問的實現。
  3. In order to get the energy characteristic of flywheel, this paper put forward the circumrotate state k of flywheel by analogy with soc. then, the energy model of flywheel battery was established and the simulation results of the design flywheel battery were got

    本文還探討了飛輪電池的能量特性，建立了飛輪電池的能量模擬模型，提出用飛輪運轉狀態k來類比化學電池的soc ，並用simulink對所設計的飛輪電池進行了模擬分析。
  4. Firstly, study the hydrodynamic properties in the filtering bed ; secondly, analyze the influencing factors by the method of numerical simulation with the above mathematical model

    第二，應用試驗建立的滲濾取水水文地質數學模型，對滲濾取水的取水量影響因素進行數值模擬分析。
  5. The control system, machinery and magnetic structure of giant magnetostrictive inchworm motor ( gmim ) have been designed based on the controlling theory, characteristic of giant magnetostrictive material and performance index of the subject. the mathematic model of the inchworm motor has been founded and the simulation of characteristic has been carried out

    根據自動控制原理，結合超磁致伸縮材料的磁特性，按照課題給定的性能指標，對超磁致伸縮爬行電機的機械結構、磁路結構和控制系統進行了初步設計；建立了整個電機系統的數學建模，並對系統特性進行了模擬分析。
  6. Consisting of the protracting graph of hydrogen - like atom ' s angle distributing, computer simulation of the symmetry of molecular orbital and chemical reaction mechanism, showing the molecular point group and symmetry element, computer simulation of molecular vibration, bravias ' s crystal lattice and their transforming, extracting of plane periodic lattice, extracting of solid periodic lattice, close packing of isometrical pellet and the structure of simple mental substance, close packing of unequal pellet and crystal structure of representative ionic crystal, computer simulation of phase analysis by x - ray diffraction

    內容包括類氫原子角度分布圖的繪制，分子軌道對稱性和反應機理的微機模擬，分子點群和對稱元素顯示，分子振動運動的微機模擬，布拉維晶格和晶格轉化，平面點陣抽取，立體點陣抽取，等徑網球的密堆積和金屬單質結構，不等徑圓球密堆積和典型離子晶體結構， x射線多晶衍射的微機模擬十個子模塊。
  7. Manipulate mechanism with concentrative link lever has important significance to improve maneuverability of bulldozer currently. this thesis includes : designing manipulate mechanism with concentrative link lever and simply calculating force and displacement for operation, based on the referring existing manipulate mechanism of bulldozer ; using high - grade 3 - dimensional plotting software ug ( unigraphics ) to sculpt ; using adams ( automatic dynamic analysis of mechanical systems ) to establish virtual prototyping model and do kinematic simulation. the results verify the rationality of this mechanism and provide the basis for trial - manufacture of physical prototyping and betterment design

    本文做的主要工作是：參考推土機原有的變速轉向操縱機構，設計了集中連桿操縱機構並進行操縱力和操縱行程的簡單計算；使用高檔三維造型軟體ug （全稱unigraphics ）進行推土機集中連桿操縱機構的造型設計；應用機械繫統運動學/動力學模擬分析軟體adams （ automaticdynamicanalysisofmechanicalsystems ）對所設計的機構建立虛擬樣機，並進行運動學模擬分析，驗證了機構設計的合理性，為物理樣機的試制和改進設計提供了依據。
  8. The structure and operating principle of an air - charged split - type adjustable shock absorber was described, e non - linear parameterized mathematical model of this shock absorber ' s damping characteristics was established according to fluid mechanics theory and the main structural affection factors to shock absorber ' s damping performance, such as the diameter of piston valve orifice, the diameter of adjustable orifice, the initial volume of gas chamber, the diameter of piston rod, the inner diameter of oil pipe and so on, were analyzed by simulations

    摘要通過分析一種分體式充氣可調阻尼減振器的結構和工作原理，運用流體力學理論，建立了該減振器阻尼特性的非線性參數化模型，模擬分析了活塞阻尼閥孔徑、阻尼調節孔徑、氣室初始體積、活塞桿直徑、油管內徑等主要結構參數對減振器阻尼性能的影響，通過試驗測試，得到了減振器樣件的阻尼特性及其可調范圍。
  9. Finally we set up three - dimensional space model to simulate the space effect during tunnel construction, analyze the transaction between the left runnel and the right tunnel, and also analyze the deformation and stability of mid - partition

    最後建立了三維空間模型，對連拱隧道開挖時的空間效應、左右洞的相互影響，以及中隔墻的變形和穩定性進行了模擬分析。
  10. The thesis built the relation between containing water and the properties of trail dam ' s soil by geomechanical properties of trail dam ' s soil ; analysed the seep rule of water in the trail dam ' s field and the change of soakage line. the thesis applied the limited element to analyze the trail dam of baogang by the engineering item in production. it calculates the dynamic and static response about the dam using the numerical simulation method

    本文通過大量的尾礦土物理力學性質試驗資料，建立了含水量與尾礦土性質之間關系曲線；分析了水在尾礦壩區的滲流規律和不同標高時浸潤線的變化情況，為分析尾礦壩的穩定性提供依據；結合生產上的工程項目，從包鋼尾礦壩的穩定性研究入手，應用有限元法，通過數值模擬分析了水對尾礦壩的靜力、動力穩定性影響。
  11. It is concluded that the equivalent target expression and the method of calculating terminal velocity can efficiently increase the calculating precision and can be used in the battle damage simulation

    結果表明：建立的等效靶公式和剩餘速度求解方法顯著地提高了計算精度，可以應用於戰斗損傷模擬分析中。
  12. Thirdly, an ideal satellite orbit is simulated, and on this foundation, we establish some typical simulation and testing circumstances. lastly, after simulation in the simulation and testing circumstances, we compare the performance of ukf and ekf. and then, based on the outdoor experiment of the vehicle, an analysis and contrast between our simulation results and commercial data process software is carried out, and the conclusion is obtained

    首先在第三章提出的目標運動模型的基礎上建立了系統狀態方程;其次簡要分析了衛星導航系統中的各類誤差，建立了基於偽距觀測量的系統觀測模型;第四節利用yuma格式歷書數據模擬了未受攝動影響的衛星軌道，並在此基礎上建立了幾種典型的動態模擬測試環境;第五節為模擬分析和比較，先對ukf演算法和ekf演算法在動態模擬測試環境中進行了模擬比較，然後針對外場試驗，對非線性濾波獲得的定位結果與商業軟體進行了分析比較，並得出結論。
  13. The research object of this thesis is a chip - array that is fixed on one of printed circuit boards ( pcb ), which are located in a forced air field ( forced convection ) in an electronic case ; and from the essential equations of airflow we can deduce the mathematical model of the turbulent flow ; then we can establish the finite element algorithm and apply the fe software to work out the equations of turbulent flow, finally we can use the software to display and analyse the field of flow and temperature

    本文以處于強迫空氣對流流場中的某pcb板及其板上的電子元件陣列作為研究對象，推導了紊流流場的數學模型，並建立了相應的有限元求解格式，應用有限元法分析軟體對該系統的紊流流場和溫度場進行了模擬分析：解算出pcb板上各電子元件的溫度分佈；並提出了用於求解系統風道特性曲線的cfd方法。
  14. The tectonic subsidence curves on the southeastern margin of the yangtze plate are drawn out using of backstripping method for the basin formation and evolution. the basins located in the southern margin of the yangtze plate, in the basin dynamic computer simulation, is explored and constituted to be a typical foreland basin which is of not rather high mountain and thermal situation to be lower in this older orogeny belt

    在沉積盆地分析方面，基本查明揚子板塊東南邊緣早古生代被動大陸邊緣沉積特徵及沉積構造演化，同時運用反剝法技術對揚子板塊東南大陸邊緣沉積盆地形成，演化的構造沉降動力學進行探討，運用計算機模擬方法，定量動力沉積學對揚子東南邊緣奧陶紀到志留紀前陸地進行計算機模擬分析，探索並建立這個古老造山帶前陸盆定量參數和動態定量模擬。
  15. The eyeable ballistic simulation is completed after reading the ballistic data. the landform in the eyeable scene is formable by use of algorithms for generating fractal terrain

    讀取數據並形成可視化彈道模擬，建立的可視化場景中運用了當前較新的分形演算法產生地形。
  16. The simulation of these particular systems is based on a fractional integrator where the non - integer behavior acts only on a limited spectral band

    這種特殊系統的模擬建立在有限頻率區間非整數階積分運算元的基礎上，其非整數階作用僅限於有限頻率區域。
  17. Considering special form of the boiler frame, the reconstruction and enforcement method, in addition dynamic analysis are given by particular steps : establishment of the model of boiler steel frame, determination of earthquake loads and distribution form, and anti - side force system for the frame to model and analyze, involving loads on the frame and above it, earthquake loads, damping, sway control installation, hanging bar and plate beam

    考慮鍋爐構架鋼結構的特殊形式，研究並提出了電站鍋爐鋼結構改造加固研究方法，及動力分析的具體步驟：建立了鍋爐鋼結構動力分析模型、地震荷載分析方法、建立了鍋爐鋼結構布置型式、及整個鍋爐鋼構架抗側力體系模擬分析方法。具體包括：鋼構架本體及構架上荷載、地震載荷與阻尼系數確定、制晃裝置確定、吊桿與大板梁簡化。
  18. The signal format of gps is analyzed, the principle models and mathematical models are established, the ber performance is analyzed in a channel interfered with wide - bandwidth awgn, narrow - bandwidth awgn, transmitted signal, single - tone signal respectively. based on the results above interference methods are discussed and simulated. then the performance of code acquisition and code trace of a digital gps receiver are discussed. the modem of linkl 1 and link4a are modeled and their ber performances are analyzed and simulated in channel s interfered with awgn, single - tone signal and multi - tone signal respectively

    建立了jtids的收發終端的數學模型，分析它在噪聲干擾、相關干擾、互相關干擾下的誤碼性能，提出較佳的干擾方法和干擾碼型，並進行模擬模擬；分析了gps的信號格式，建立了gps的原理框圖模型、信號數學模型，並對其在寬帶噪聲干擾、窄帶噪聲干擾、轉發干擾、單頻干擾等情形下的誤碼性能進行了分析比較，提出相對較佳的干擾方法，並做了計算機模擬，針對一數字式gps接收機中擴頻碼捕獲與跟蹤環的特性進行分析；建立了link11和link4a數據鏈調制解調數學模型，對它們在噪聲干擾、單音干擾、多音干擾等下的誤碼性能進行分析，最後對干擾情況進行了模擬模擬。
  19. Abstract : a statistical - simulation spectrophotometric method for the assayof the individual components in the compound formulation has been developed by building a model of the real absorbance - concentration relationships at several sensitive wavelengths with lagrange - interpolation

    文摘:對統計模擬分光光度法測定復方制劑組分含量的方法進行了改進，用拉格朗日插值法建立靈敏波長下吸光度和組分含量之間關系的模型。
  20. Motor controller composed by separated analog devices before has developed into analog - digital or full digital controller

    電機控制器也由模擬分立元件構成的電路向數模混合、全數字電路方向發展。
分享友人
分享到 Line

分享到臉書