潤滑用具 的英文怎麼說

中文拼音 [rùngǔyòngjù]
潤滑用具 英文
lubricating utensils
  • 潤 : Ⅰ形容詞（細膩光滑; 滋潤） moist; smooth; sleek Ⅱ動詞1 （加油或水 使不幹枯） moisten; lubricate 2 ...
  • 滑 : Ⅰ形容詞1 （光滑; 滑溜） slippery; smooth 2 （油滑; 狡詐） cunning; crafty; slippery Ⅱ動詞（貼著物...
  • 用 : Ⅰ動詞1 （使用） use; employ; apply 2 （多用於否定: 需要） need 3 （敬辭: 吃; 喝） eat; drink Ⅱ名...
  • 潤滑 : [機械工程] lubricating; lubrication; lubricate
  • 用具 : utensil; tool; tackle; tackling; apparatus; appliance
  1. Introduction : yh series of artesian well has a good lubricity, floatability and rheopery. it plays an important role in protecting the wall of the well, and it also can be used in the aspects of oil field artesian well and oil base unfreezing slurry

    介紹： yh系列鉆井用膨潤土具有良好的潤滑性，懸浮性和觸變性，能有效地起到保護井壁的作用，可用於油田鉆井，油基解卡泥漿等方面
  2. Ptfe has many excellent properties such as : bonzer self - lubrication ^ low fricatiom chemistry stabilization and thermal stabilization, but its wear resistance is very low to improve the wear resistance of ptfe a lot of researches have been down by means of adding fillers to it, there are still less report on nano - inorganic filler filled ptfe composites to change properties. in this paper, experimental study was made to question above problem

    Ptfe具有優異的自潤滑、低摩擦、化學穩定性和熱穩定性，但耐磨性較差，因而人們在利用不同種類的填料對ptfe進行填充改性，提高耐磨性方面作了大量研究工作，但在使用納米無機填料填充改性ptfe方面研究很少，因此本課題主要探討這一方面的問題。
  3. Since the guides are usually made from materials having high-energy surfaces, wetting by polar lubricants usually is satisfactory.

    由於導紗桿一般都是用具有高能表面的材料制備，一經極性潤滑劑潤滑，往往即達到飽和狀態。
  4. Also be used in hydraulic system of machine tools having same slideway & hydraulic lubrication system

    亦適用於擁有同一液壓及導軌潤滑系統之工具液壓系統
  5. Application : lead stearate is the thermal stabilizer and lubricant for pvc with excellent thermal and light stability

    用途:本品為聚氯乙稀熱穩定劑，具有很好的潤滑性和較好的光、熱穩定性。
  6. The lubrication aluminum oxide coatings with high hardness, antiwear and corrosion resistance by using microarc oxidation technology were discussed as well as its application

    對應用微弧氧化技術制備具有潤滑性能的高硬度耐磨、防腐蝕氧化鋁塗層及其應用進行了初步探討。
  7. In the paper, the finite element simulation software dynafrom is applied to analyze the affect of different blank holder during the forming process of laminose stepped tubular part, predict the possible defects such as wrinkle and break, obtain the rational style of blank holder avoiding the occur of defects and determine the rational configuration of die. the forming affect of thin - wall shallow stepped tubular part is analyzed when using different lubricate condition ( friction coefficient ). by this method, the relationship between friction coefficient and drawing depth of laminose stepped tubular part is obtained

    本文利用有限元模擬軟體dynafrom分析了不同類型的壓邊圈對薄壁階梯筒形件成形過程的影響規律，預測了採用不同類型壓邊圈時可能出現的成形缺陷如起皺和拉裂，獲得了防止缺陷產生的合理壓邊圈形式，確定了合理的模具結構形式；分析了不同的潤滑條件（摩擦系數）對薄板階梯筒形件成形的影響，獲得摩擦系數與薄板階梯筒形件的拉深深度的關系；分析了階梯筒形件成形過程中的不同階段的應力應變分佈、毛坯材料厚度變化情況，並獲得了階梯階梯筒形件能一次拉深成形的條件。
  8. As a new type gear transmission, double circular arc profile bevel gearing carries out its transmission by means of meshing between convex - concave tooth profile in both of the direction of tooth trace and the direction of tooth depth, so it has advantage of high load capacity, long service life, easy forming hydrodynamic oil film between teeth as well as high quality of running - in etc. therefore, more attention has been paid to its application and research in recent years

    作為一種新型齒輪傳動方式，雙圓弧弧齒錐齒輪傳動不論在齒線方向、還是在齒高方向，均為凸、凹齒廓相嚙合，因而它比一般的弧齒錐齒輪傳動的承載能力高，使用壽命長；並且在嚙合過程中兩齒面間容易形成潤滑油膜，具有良好的跑合性能，所以對它的應用和研究日益受到人們的重視。
  9. The moderate supersonic carbon added to the mold flux for ultra - low carbon steel is used to stay the melting speed as skeleton. then the mold flux coils have the good adiabatic, insulation and even flow property. at the same time it cause the carbon increase in the steel slabs and the operation of the ultra - low carbon is affected at last

    超低碳鋼連鑄結晶器用保護渣中，外加中超碳黑作為骨架降低熔化速度，使保護渣具有良好的絕熱保溫性、均勻流動的潤滑性，但同時卻會引起鋼鑄坯的碳增量，最終影響超低碳鋼的成功操作。
  10. Requirement : bachelor degree or above in fluids power transmission and control or mechanical engineering ; at least 3 years ‘ working experience in fluids engineering. ( preferably in design institute ) ; good knowledge of hydraulic and lubrication control system ; working experience in installation and commissioning of hydraulic and lubrication systems ; proficient in autocad and solidworks ; good english communication skills ( spoken and written ), team spirit

    要求：大學本科以上學歷，液壓傳動及控制專業；三年以上液壓潤滑系統設計工作經驗（有設計院工作經歷者優先） ；具有豐富的流體控制系統的知識；具有液壓和潤滑設備的安裝和調試經驗；熟練使用autocad ， solidworks等繪圖設計工具；有較強的英語口語和寫作能力，有團隊合作精神。
  11. After looking up a large amount of native and foreign information, the materials used in the experiment were as follows : ptfe base, graphite filler, molybdenum disulfide filler, copper powder filler, carbon fiber and so on. the experimental method is that the formula was designed according to uniform experimental method, the relationship between formula and frictional property was found with spline function and then the representative test points were chosen from fitting curve to make verification test for optimization. the preparative technique of solid lubricant is cold - press sintering method

    經過查閱大量國內外文獻資料后確定原料為：聚四氟乙烯樹脂為基體，加入石墨、二硫化鉬、銅粉、碳纖維等填料；試驗方法為：根據均勻試驗方法設計配方，用樣條函數找出配方與摩擦性能的關系，然後在擬合曲線上選取具有代表性的試驗點進行驗證試驗，達到優化的目的；制備工藝：冷壓燒結法制備固體潤滑劑。
  12. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  13. Among the results of these researches, cylindrical gears with curvilinear tooth trace have merits as follows : higher bending stress, low noise, better lubrication conditions, and no thrust forces. so this kind of gear can be considered to substitute the helical gear and herringbones

    本文提出的弧齒線圓柱齒輪是一種新型齒輪傳動形式，具有傳動平穩、噪聲低、潤滑性能良好、輪齒彎曲疲勞強度大的特點，因此該齒輪可以作為斜齒輪和人字齒輪的替代品用於高速重載場合。
  14. You are correct about the - 40c miscibility problems. the oil has to have a low pour point in order to flow and still have sufficient viscosity for the compressor lubrication

    你談到油在40度的溶解性的問題是正確的。油不得不具有有一個很低的流動點（流（動）點：油或其他液體在規定條件下流動的最低溫度） ，還需要有足夠的粘度作為壓縮機的潤滑作用。
  15. Meva, a. s. is a special partner in the following areas : respirators and waste in addition waste containers as well as for special. further containers and barrels belong to it

    以自己高精確度著稱的企業meva ， a . s .是一家製造垃圾，廢物筐，防毒面具、呼吸面具，集裝箱，筒，專用潤滑材料的價格優惠的、高級別的合作夥伴。請您訪問我們的主頁或發送給我們電子郵件，垂詢其它當前的信息。
  16. Our portable compressors are equipped with pressure regulators with filter and lubricators to ensure the most effective use of specific tools

    我們的便攜式壓縮機有空氣過濾和自動潤滑裝置，裝有壓力調節器保證最有效的適應工具的使用。
  17. Oil or non - oil businesses may not sell solvent oil, lubricant, or other volatile hydrocarbon compounds as fuels for motor vehicles or machinery

    石油業或非石油業者，不得銷售溶劑油或潤滑油等具有揮發性碳氫化合物，供車輛或動力機械作為燃料使用。
  18. Product description : this series product has entire auto - lubrication systems and the ordinary two big kinds supplies to select, this machine major parts cancels the needle, cam and the ball bearing all uses the high quality import components, also selects the high quality steel products quenching heat treatment to the main stress components, the essential components uses special phosphorus processing, the foreign dew components all adopts special - purpose seal - up device and drains the oil the measure, therefore, entire causes machine throughout to locate the lubrication is reliable, the revolution is steady, under the high speed low chirp condition works

    本系列產品具有全自動潤滑型及普通型兩大類以供選用，本機主要零件勾針，凸輪及滾珠均採用優質進口零件，對主要受力零件亦選用優質鋼材淬火熱處理，關鍵零件則採用專門磷化處理，對外露零件均採取專用密封裝置及排油措施，因此，使整機始終處于潤滑可靠，運轉平穩，高速低噪的條件下工作。
  19. Since ureido - dcarbamido grease with high dripping temperature, long life, withstand high temperatures, high - speed, anti - water, it has broad industrial applications, but the ability of resisting high pressure is not well which limit its development more or less

    由於脲基潤滑脂具有滴點高、使用壽命長、耐高溫高速性、抗水性等優點，使其在工業上具有廣泛的應用，但脲基脂本身的極壓性能不高等缺陷在一定程度上限制了其發展。
  20. This product can be used in most of polystyrene and polypropylene products. it can increase the flexibility of plastic. it has inner lubrication and demolding capacity

    用途：本產品適用於食品級聚苯乙烯、聚丙烯生產中的增塑、內部潤滑用，具有良好的穩定性和低揮發性，能良好的改善ps 、 pp在成型時的流動特性。
分享友人
分享到 Line

分享到臉書