爐型及結構 的英文怎麼說

中文拼音 [lúxíngjíjiēgòu]
爐型及結構 英文
types and structure of furnace
  • 及 : Ⅰ動詞1 （達到） reach; come up to 2 （夠得上; 比得上） can compare with; be comparable; be up to ...
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 結構 : 1 （各組成部分的搭配形式） structure; composition; construction; formation; constitution; fabric;...
  1. Considering special form of the boiler frame, the reconstruction and enforcement method, in addition dynamic analysis are given by particular steps : establishment of the model of boiler steel frame, determination of earthquake loads and distribution form, and anti - side force system for the frame to model and analyze, involving loads on the frame and above it, earthquake loads, damping, sway control installation, hanging bar and plate beam

    考慮鍋爐構架鋼結構的特殊形式，研究並提出了電站鍋爐鋼結構改造加固研究方法，及動力分析的具體步驟：建立了鍋爐鋼結構動力分析模型、地震荷載分析方法、建立了鍋爐鋼結構布置型式、及整個鍋爐鋼構架抗側力體系模擬分析方法。具體包括：鋼構架本體及構架上荷載、地震載荷與阻尼系數確定、制晃裝置確定、吊桿與大板梁簡化。
  2. Kiln guiding - rail bricks, supporting suspension bricks and ultra - thin extruded batts are recently developed for the phenomenon of pollution and pulverization caused by using insulation bricks or high - temperature refractory wool in the kilns. they are made from cordierite and mullite with a high strength. they can cover the kiln wall structure made of refractory fiber, greatly reduce pollution and pulverization, remarkably save the energy, easy to be constructed on worksite, and the aspect is beautiful and novel. they are ideal material for large - scale shuttle - kiln or computerized puadrate kiln

    窯體道軌磚及支撐吊磚和超薄中空板是針對目前窯爐採用傳統耐火材料在使用過程中由於組多原因造成落臟或粉化現象而開發生產；它是堇青石-莫來石材料製造而成，強度大，熱穩定性佳、覆蓋耐火纖維製品組成窯爐墻體結構，它能大大減輕落臟與粉化現象，節能效果十分明顯、施工方便、整體美觀新超是高級大型梭式或電腦方窯等窯爐的理想材料。
  3. Methods for norm of access door and its structral dimensions of industrial boiler

    工業鍋爐爐門.型號編制方法及結構要素尺寸
  4. Based on the perturbation riccati transfer matrix method, the calculating program are developed. the program can be used to the perturbation analysis and the sensitivity analysis of the real and complex, the single and repeated eigenvalues and eigenvectors for lateral vibration of rod and beam structures, especially suitable to the perturbation analysis and the sensitivity analysis of eigenvalues and eigenvectors for rotordynamic systems ; 2. the perturbation riccati transfer matrix method was applied to identify the parameters of the rotor for a boiler supply pump, and the accurate dynamic model of the rotor was archived

    該程序可以對桿、梁結構橫向彎曲振動的實數、復數的孤立和重頻特徵值問題進行攝動分析和靈敏度分析，特別是適合於轉子動力學系統特徵值和特徵向量問題的攝動分析和靈敏度分析； 2 、用攝動riccati傳遞矩陣方法解決了某電站鍋爐給水泵轉子的參數識別及動力模型修改的問題，並給出了該種型號的給水泵轉子的更準確的力學模型，為進一步的轉子動力學分析與設計奠定了可靠基礎； 3 、給出了攝動理論在相關領域如隨機特徵值分析、隨機振動響應分析、可靠性分析、靈敏度分析、優化設計以及參數識別中的應用公式。
  5. The paper suggests the new heat insulation materials and charge structures used under different temperatures condition of blasting objects, and presents the methods to avoid miss - fire and the measure to control the blasting shock and vibration damages to protected objects such as furnace lining, furnace body and back - up bearing

    推薦了被爆體在不同溫度條件下應採用的新型隔熱材料及裝藥結構，同時給出了施工過程中避免拒爆的方法及控制爆破產生的振動沖擊對被保護對象（如爐襯、爐皮和支撐軸承等）危害的具體措施。
  6. The object to study in this paper is the electric heat reservoir boiler, which is used to supply heat water and bask for the resident population. the use of the system define the character of the output medium with the lower request on quality and parameter, at the same time, it ask the boiler should has the higher character on the respect of the cost, reliability, economy, and so on. hence, the paper carefully design and study the system for the choice and design of the boiler core heating componet, the lay of the heat exchanger, the working status of the heat reservoir equipment, the adjustment and control mode of to supply heat water. the study work mainly include underside some contents, forexample : 1. to confirm the heat medium parameter to adapt the requirements of the most of the heating equipments and to design the instruction of the boiler and heat reservoir as simple as possible

    圍繞上述原則，本文從電熱鍋爐核心加熱元件的選型及設計、換熱面的布置、蓄熱設備的運行工況、供熱的調節方式以及控制方法進行了較細致的研究和計算，具體研究工作有以下幾個方面： 1 .根據使用要求，確定適用於多數採暖設備的熱介質參數，設計在結構型式上盡可能簡單的鍋爐和蓄熱器； 2 .對製造加熱元件電熱管的各種材料進行了對比和分析、在結構尺寸上進行了仔細的分析和計算，根據實際使用條件給出合理的設計，使其具有較高的可靠性和使用壽命； 3 .對不同換熱面布置形式進行傳熱分析。
  7. Considering materials and constructions style the computation for state mechanics on beam and column, and connection are made

    研究了電站鍋爐鋼結構材料及構造特性，並對電站鍋爐鋼結構梁、柱等構件進行了靜力分析與典型連接計算。
  8. From the view point of system flowage of coal in power generation enterprises, this paper reviews the effect of coal characteristics on the operation of power plants boiler, and proposes modeled means and methods which expresses the coal characteristics affecting generation cost. the modeling of coal characteristic effects helps power generation and coal enterprises to provide and produce more economic coal for power plants, the function and characteristic of coal quality engineering analysis for power plant is discussed, the structure of coal quality engineering analysis system is explained combining with the electric produce process

    從發電企業煤的系統流程出發，研究了燃煤特性對電站鍋爐運行的影響，提出了煤質特性對發電成本影響模型化的途徑和方法。煤質影響模型的建立有利於發電企業和煤炭企業採取措施，組織和生產對于電站來說更為經濟的煤源。討論了火電廠煤質工程分析方法的功能及特點，並結合火電廠電力生產過程和煤質工程分析關系圖說明了煤質工程分析系統的結構。
  9. The status of rh national and international is introduced first in this dissertation, and then the process and the mathematical models of rh is described. the emphasis of the dissertation is the fourth part which includes structure of the network, data flow of the process computer, division of the subsystem, and the functions of all the software

    本文首先介紹了rh爐外精煉的國內外現狀及攀鋼上rh爐外精煉項目的背景，接著描述了攀鋼rh真空精練的工藝及優化數學模型，然後是文章的主體部分，深入闡述了整個系統的硬體結構、軟體數據流程、軟體子系統的劃分及各軟體部分的功能。
  10. It ` s suitable for the bend and deformation of the metal plates and it can roll the round and arcshapes and the cone ones within its specified ranges. it has the function of prebending the plate at both ends. the two lower rollers are the driving ones and can make the horizontal movement ; and the upper is a driven one and can make the up and down movement. the moving manner includes the mechanical and industry, boilers, shipbuilding, metal structure, machine manufacture and other trades, especially for the roll the steel trunks with smaller diameter and longer length in power transmission and trandform and other trades

    該機適用於金屬板材的彎曲成型，可卷制圓形，弧形和一定范圍的錐形工作，並有板材端部預彎功能，本機型兩個下輥為主動輥並可水平移動，上輥為從動輥上下移動，移動形式有機械式和液壓式，傳動軸均採用萬向連軸器連接，它廣泛適應于石油化工鍋爐造船金屬結構及機械製造行業，特別適用於送變電行業等直徑較小長度較長鋼管桿的卷制
  11. In this thesis, designing " a " furnace arch by applying momentum synthesis and applying the laminar coal supply device to improve the burning in furnace, the operation duty of chain boiler, the thermal efficiency of boiler, are studied, according to the problems of the irrationality on boiler proper frame and the disproportion on system disposition in the design and the operation of chain boiler

    本文根據鏈條鍋爐設計和運行中存在鍋爐本體結構上的不合理、系統布置上的不匹配等問題，研究了利用動量合成法設計「 」型火焰爐拱，以及利用分層給煤裝置來強化爐內燃燒，改善鏈條鍋爐運行工況，提高鍋爐熱效率。
  12. After building the model of the boiler, we build a monitoring system based on the model to monitor the soot deposition level of the boiler heat exchanger surface. after this, we probe into the monitoring system, discuss its function, structure, modules and working process in detail

    在建立了適用於該爐的監測模型之後，開發了鍋爐受熱麵灰污染狀況監測系統，詳細討論了在該監測系統要具備的功能、其總體結構、相應的模塊組成以及工作流程。
  13. Abstract : the structure, characteristics and application of or dina ry coal - dust - injection guns used in blast furnaces is introduced and the reaso ns the curved coal - dust - injection gun should replace straight one and ceramic - lined composite gun head should replace straight stainless steel one have been put fo rward. the performance of curved guns used at baosteel and shougang and the pros pect of this new type of gun has been given

    文摘:對目前國內高爐採用的普通型煤粉噴槍的結構、特點及使用情況進行了分析並指出其不足，提出了將直煤槍改為彎煤槍；用陶瓷內襯復合彎槍頭取代不銹鋼直槍頭的觀點與理由，給出了陶瓷內襯復合彎槍在寶鋼、首鋼高爐的應用情況，並對其發展進行了展望。
  14. Thermal and structure character of straight reheating furnace were analyzed in csp technological process. coupling with heat conduction differential equations of the thin slab and the furnace lining, the mathemat ical model of heat transfer is established in the long one dimension furnace by using zone method for making the model of radiant heat transfer. the effect of the moving velocity and kinds of the slab on temperature distribution in the furnace is discussed based upon the solutions to the mathematical model

    通過分析csp工藝中直通式輥底加熱爐的熱工及結構特性，採用區域法建立爐內輻射換熱數學模型，與加熱爐內連鑄坯及爐襯的一維導熱方程相耦合，建立長一維直通式輥底加熱爐爐內傳熱數學模型.通過對數學模型的求解，研究分析了不同的薄板坯移動速度及鋼種對加熱爐爐內溫度分佈的影響
  15. The research objective is to improve the control system performance through the combination of the advanced control strategy with the meaningful information mined from the history operation database. firstly, a new solution for the control performance enhancement is presented by the reference of the kdd technology. aiming at practical application, a novel boiler load control method, which combines the multiple model adaptive control strategy with the data mining technology, is put forward in this dissertation

    本文第一部分為熱工過程式控制制與數據信息採掘，研究的重點是通過先進控制策略的應用以及運行數據中發掘的有用信息，提高現有典型熱工過程式控制制系統的性能，內容包括：首次提出了借鑒數據信息採掘技術的思路和方法，用於完善現有的熱力系統優化控制方案；在此基礎上結合生產實際，提出了運用多模型自適應策略實施鍋爐負荷控制，並利用關聯規則的數據信息採掘方法，通過對燃料發熱量信息的在線診斷，優化控制器結構，同時實現鍋爐燃燒配風的自適應調整，提高負荷、燃燒控制系統性能。
  16. Compared with other general cfd software, the numerical modeling software of combustion process improved by the author of this paper has following features : ( 1 ) it can adjust the corresponding parameters and manipulating methods according to furnace architecture, operational parameters and fuels etc. ; ( 2 ) it can arrange the nodes of grid flexibly and also make special calculation to certain nodes, which cannot be accomplished by the general commercial software ; ( 3 ) in the boundary ( water - cooled wall ) condition processing, the third boundary condition is selected for the temperature calculating, linking the combustion process inside the furnace with the flow and heat exchange of water inside the water - cooled wall, so the heat absorbing and the influence of the water - cooled wall to combustion process and heat transfer of furnace are explicitly explained

    與其它通用的cfd軟體相比，經論文作者所改進的燃燒過程數值模擬軟體的特點在於： （ 1 ）能夠結合爐子結構、運行參數及燃料等，調整模型中相應的參數及處理方法； （ 2 ）可以靈活的安排網格節點，對某些節點進行特殊處理； （ 3 ）在邊界（水冷壁）條件的處理上，溫度選用了第三類邊界條件，把爐內燃燒過程和水冷壁內工質的流動和換熱聯系了起來，使得水冷壁內的吸熱情況對爐內的燃燒和結渣的影響充分體現出來。
  17. Abstract : this thesis introduces the structure, qualities, technical parameters, design bases, and application of the newtype continuousdie - forging gasheater for the medium and small sized blowout patch blank

    文摘:介紹中小型軸圈坯料鍛造用天然氣新型連續模鍛加熱爐的結構、特點、技術參數、設計依據及使用效果。
  18. Aiming at the structure characteristics of the pipeline system of the existing boiler combustion equipment, the paper work out the new - style air speed measure components via the theory analysis of the existing measure components of all kind of forms and measure theory. and then the paper designs and builds the wind tunnel test - bed to process the test and research of the air speed measure components in order to realize it ' s structure and each characteristic parameter

    針對現有的鍋爐燃燒設備管路系統的結構特點，論文通過對現有的各種形式、測量原理的流量測量裝置的理論分析，設計出新型的風速測量元件，並且設計、建立滿足試驗所需的風洞試驗臺，對風速測量元件的結構及各項特性指標進行試驗研究，完成一次元件的開發工作。
  19. Pangan hot strip mill is a large plants for hot steel coil, it ’ s mainline automatic system is two levels, the level 1 is basic automatic control system, and level 2 is process control system, level 2 controls the furnace area 、 rough mill area and finish mill area, it ’ s main function is data traffic 、 steel rolling tracing 、 the model calculating for setup and the sampling for the rolling data. the process system will save a mass of data for model data 、 setup data and sampling data

    攀鋼熱軋板廠是一座大型的熱連軋鋼板生產工廠，主軋線自動化系統採用2級控制結構，其中第1級是基礎自動化控制系統，第2級是過程式控制制系統，主要完成從加熱爐區、粗軋區、精軋卷取區的數據通信、軋件跟蹤、加熱和軋制模型參數設定計算以及軋制過程參數的採集等主要功能。
  20. Abstract : thermal and structure character of straight reheating furnace were analyzed in csp technological process. coupling with heat conduction differential equations of the thin slab and the furnace lining, the mathemat ical model of heat transfer is established in the long one dimension furnace by using zone method for making the model of radiant heat transfer. the effect of the moving velocity and kinds of the slab on temperature distribution in the furnace is discussed based upon the solutions to the mathematical model

    文摘:通過分析csp工藝中直通式輥底加熱爐的熱工及結構特性，採用區域法建立爐內輻射換熱數學模型，與加熱爐內連鑄坯及爐襯的一維導熱方程相耦合，建立長一維直通式輥底加熱爐爐內傳熱數學模型.通過對數學模型的求解，研究分析了不同的薄板坯移動速度及鋼種對加熱爐爐內溫度分佈的影響
分享友人
分享到 Line

分享到臉書