特製光纖 的英文怎麼說

中文拼音 [tèzhìguāngxiān]
特製光纖 英文
specialty optical fiber
  • 特 : Ⅰ形容詞（特殊; 超出一般） particular; special; exceptional; unusual Ⅱ副詞1 （特別） especially; v...
  • 光 : Ⅰ名詞1 （照耀在物體上、使人能看見物體的一種物質） light; ray 2 （景物） scenery 3 （光彩; 榮譽） ...
  • 纖 : 纖形容詞（細小） fine; minute
  • 特製 : manufacture for a special purpose; tailoring; made-to-measure; made-to-order; purpose made
  1. No probe leakage was found when the sensor dipped in ethanol and n - hexane for 15 days. this technique is limited for its prolix procession and request of special active function in the structure of molecular probe, sol - gel : the development of sol - gel technique provides a convenient way to incorporate molecular probe in porous inorganic material

    化學鍵合法：分子探針通過化學反應鍵合於固定相，在溶劑中不泄漏，提高了傳感器使用壽命，在乙醇和正己烷中浸泡15天，未見探針分子泄漏。但繁雜的過程和對探針分子結構的特殊要求限制這一方光纖化學傳感器、儀器系統的研製們比生物和環境監測中的應用（摘要） 2法的應用。
  2. This sensor in this paper is based on the characteristic absorption spectrum of acetylene to detect acetylene content and utilizes the optical waveguide all through the process, so it has the intrinsic anti - explosion function, fast response time and good repeatability

    本文研製的吸收型光纖乙炔傳感器是利用乙炔氣體的特徵吸收峰來在線檢測乙炔氣體的含量的，且整個過程利用的是光波導，因此它有本質防爆功能。在檢測乙炔時該傳感器響應快、重復性好。
  3. Working on laser diode fiber - coupling modules was summed up, they are, setting up the model of far - field distribution of laser array and the far - field characteristics of difference structures ; designing the temperature - controlled laser diode fiber modules, that has been used as a laser system with temperature - controlled and fiber - output ; realization with high - brightness laser diode fiber - coupling modules ; the fiber ' s application in the field of high power laser

    總結了自己在光纖耦合輸出激光二極體模塊方面所做的一些工作，建立了半導體激光器列陣遠場光束分佈模型，並結合具體參數分析了不同結構的激光器列陣的光束遠場分佈特性，可以知道我們設計和優化激光器列陣的結構。設計並製作了光纖耦合模塊的溫度控制系統，並製作成溫控光纖輸出激光器半導體系統投入使用。
  4. Abstract : in this paper, the design of the sense organ of the silicon miniature inertial meter is presented. the approving structure of the sense organ is fulfilled by the fabrication techniques of laser processing and chemical etching, laser fibre optic vibration is used to test the vibration characteristic of the suspensi on beams

    文摘:設計了硅微型慣性加速度計的敏感頭並應用激光加工和化學蝕刻相結合的工藝方法製造得到了滿意的結構，應用激光光纖測振儀檢測了懸臂梁振動特性。
  5. In this paper, the design of the sense organ of the silicon miniature inertial meter is presented. the approving structure of the sense organ is fulfilled by the fabrication techniques of laser processing and chemical etching, laser fibre optic vibration is used to test the vibration characteristic of the suspensi on beams

    設計了硅微型慣性加速度計的敏感頭並應用激光加工和化學蝕刻相結合的工藝方法製造得到了滿意的結構，應用激光光纖測振儀檢測了懸臂梁振動特性。
  6. Aimed at the present status of detecting oil storage fluid, the article advances a method which utilizes the dramatic feature of optical fiber sensor to develop the optical fiber liquid height meter, and to substitute the manual examination means, and supplements the optical fiber liquid overhead alarm equipment, the optical fiber grating temperature sensor, and uses the network technique to build the optical fiber sensing safety supervisory system to realize the intelligent examination of oil - tank area, thereby avoids or decreases occurrence and the risk of accident, and supplies the reliable guarantee for the big - and - middle - sized tank farm safe production

    本文針對儲油液位的檢測現狀，提出利用光纖傳感器的特點研製光纖液位計，取代手工檢測的方法，輔以光纖液位高位報警器，光纖溫度傳感器，並應用網路技術構建光纖傳感安全監測系統，實現石油罐區的智能監測，從而避免或減少事故的發生，降低風險，為大中型油庫的安全生產管理提供可靠的保障。本文首先對安全監測系統中的核心硬體? ?光纖液位計的工作原理及特點進行了介紹。
  7. Then we deduce the couple - mode equations that describe the mode coupling behaviors in this kind of gratings. based on this, we study the photosensitive inner cladding ' s influence on the core - mode - core - mode coupling and the core - mode - cladding - mode coupling in this kind of grating. a fiber bragg grating was experimentally fabricated with this kind of photosensitive fiber

    然後以第二章給出的耦合模理論為基礎，結合用帶光敏內包層的包層模抑制光纖的結構特性，推導出用這種光纖製作的光纖布拉格光柵的耦合系數和耦合模方程。
  8. The variation of optical spectrum of a special kind of optical fiber has been reported after - radiation, which may be used as a new kind of optical fiber filter

    摘要報導了2種結構的大芯徑石英光纖在輻照后的光譜特性的變化，發現摻雜光纖在輻照后具有光學濾波作用，由此可利用這種特性研製一種新型的光纖濾波器。
  9. Point diffraction interferometer - a physical idea, is invented by smartt and strong in 1972, advanced by smartt and steel, and used to test astronomical telescope, it has simple structure and has not special demand to source. recently. with the development of fiber ' s manufacture and coupling technology. the simple modern fiber ' s center is smaller than before, this make it possible to progress fiber point diffraction interferometer ( pdi ), in addition to test convergent wavefront, it can test the reflective concave. the excellence of pdi is that it does not need standard mirror. in intereference testing, the standard mirror is the main reason which limit the improvement of precision, pdi can avoid difficulty to provide the wide future for high precision testing. pdi, which produce the standard sphere wavefront, is an instrument which realize the phase shifting with piezoelectric transducer ( pzt ), and collect the interferogram with ccd, in this paper, a adjusting methord is described, then data processing is obtained

    點衍射干涉儀這一物理思想，早在1972年smartt和strong就已發明，由smartt和steel做了進一步發展，並成功的用於檢測天文望遠鏡，它結構簡單，對光源沒有特殊要求，近年來，由於光纖製造工藝以及耦合技術的發展，單模光纖纖芯不斷縮小，為光纖點衍射干涉儀得以發展提供了前提條件，該干涉儀由激光照明，除了檢測會聚波前外，還可以用來檢測反射凹球面，進而應用到單個面形的檢測；另外，光纖點衍射干涉儀最大的優點是不需要標準鏡，在干涉檢測中，標準鏡是檢測精度受限的很大原因，光纖點衍射干涉儀能繞開這一難度，為進行高精度的光學檢測提供了廣闊的前景。
  10. China is particularly connector forum areas connector. the special field connector, line cable, automobile electron, fibre - optical, switch, communication equipment and material produce a manufacturing engineering, the testing standard communicates with

    中國連接器論壇是特別領域連接器，連接器技術，線束，電纜線，汽車電子，光纖，通訊設備和材料生產製造工程，測試標準發布和收集的專業技論壇
  11. After analyzing the characteristics of the lithium niobate crystal and the principle of electro - optic phase modulation & the coupling of single - mode fiber with optical waveguide, the fabrication of the single - mode lithium niobate bar waveguide and v - groove has been studied, the new project in which the lithium niobate v - groove is used for the coupling of the single - mode fiber with optical waveguide is put forward

    在分析了鈮酸鋰晶體的相關特性、電光相位調制的基本原理以及單模光纖和光波導的對接耦合以後，研究了單模鈮酸鋰條形波導和鈮酸鋰v型槽的製作工藝，提出了使用鈮酸鋰v型槽實現單模光纖與波導耦合的方案。
  12. Based on the relations of wear particles, wear faults and wear mode, main characteristics of wear particles size, origin, shape and granularity are analyzed. on the view of strategies and functions of monitoring, an on - line oil monitoring system is designed and key technologies for development of monitoring system are presented. the inductance and optic - fiber transducer based laboratory are designed and tested

    論文基於磨損顆粒、磨損故障與磨損形式的關系，分析了磨損顆粒的尺寸、來源、形狀和粒度等基本特徵，並從監測策略和功能分析的角度設計了在線油液監測系統，提出了開發中必須解決的關鍵技術，研製了電感和光纖組合測量傳感器。
  13. In this paper, on the basis of increasingly mature fabrication technologies of planar integrated waveguide and the optical fiber grating, we make use of not only the ( de ) multiplexing and wavelength router characteristic of arrayed waveguide grating ( awg ), but also the dispersion peculiarity of uniform fiber bragg grating ( ufbg ). then a kind of dispersion compensator, which can compensate the dispersion of the optic signal in every channel in the wdm system respectively, is devised. the method makes the compensation efficiency maximum theoretically

    本文結合近幾年來日益成熟起來的平面集成波導製作工藝和光纖光柵製作技術，利用陣列波導光柵（ awg ）的復用特性和波長路由選擇特性與均勻光纖光柵（ ufbg ）的色散特性，提出了一種能對wdm系統中各分波光信號分別進行有針對性色散補償的補償器件，該器件使wdm系統中各分波光信號所得到的色散補償在理論上達到很高效率。
  14. This system can be used to test the optical output power of sld automatically. firstly, the principle and characteristic of sld have been analyzed. the effect of sld ' s stability on ifog and the theory of thermoelectric cooler ( tec ) have also been discussed in this paper

    首先，本文分析了sld光源的原理和特性，並且介紹了驅動電流的波動和溫度的變化對sld光源的影響，分析了光源的穩定性對光纖陀螺性能的影響和光源內部控溫器件半導體製冷器的工作原理。
  15. We have demonstrated a novel voa based on high birefringence fiber loop mirror, which has many advantageous characteristics such as a simple structure, high flexibility, polarization independence, low insertion loss and low price, etc. experimental proof shows that it is convenient to realize the control of optical power by using this voa

    2 .利用雙折射光纖環鏡設計並製作了一個結構簡單的可調諧光纖衰減器，具有靈敏度高，偏振無關，低插入損耗和低成本等特性。實驗證明它可以很方便的控制光功率。 3 .提出了一種由布拉格光纖光柵和高雙折射光纖環鏡共同構成波長選擇器件的摻鉺光纖激光器。
  16. The optimization of the position and amplitude of the lpfg in the edf is also investigated. on the other hand, the edfa with 1db gain flatness is demonstrated by using the lpfg as a gain equalizer, and this novel gain equalizer inserted in the er - doped fiber ( edf ) increases the gain by 1. 5db

    首次利用這種新型濾波器作為edfa的增益平坦器，獲得了小於1db的增益平坦度。 5 、研究了長周期光纖光柵的特殊應用，提出了利用長周期光纖光柵對外界折射率的敏感特性可製成調制器和光開關的設想。
  17. By molecular design, high shrinkage polyamide for fiber was synthesized. the chip after spinning and drawing has a shrinkage of 20 ? 40 % in boiling water. the spinning speed is above 4500 m / min

    藉由分子設計，篩選共單體，合成高收縮尼龍粒，紡速可達4500米以上，纖維經延伸后，沸水收縮率20 ? 40 % 。將此纖維透過織物設計製成紡織品，具超蓬鬆感或緻密感，並有特殊光澤。
  18. By molecular design, high shrinkage polyamide for fiber was synthesized. the chip after spinning and drawing has a shrinkage of 20 40 % in boiling water. the spinning speed is above 4500 m / min

    藉由分子設計，篩選共單體，合成高收縮尼龍粒，紡速可達4500米以上，纖維經延伸后，沸水收縮率20 40 % 。將此纖維透過織物設計製成紡織品，具超蓬鬆感或緻密感，並有特殊光澤。
  19. So it becomes the most competitive new type of gyroscope. the interference fog is in the application process. the resonance fog needs shorter fiber or waveguide to realize the same sensitivity, comparing with the interference fog it can realize integration in silicon planar waveguide module and integration of ring cavity, input and output optical circuits and modulator in single chip of planar waveguide

    與干涉式光纖陀螺相比，為達到同樣的靈敏度，諧振式光學陀螺需要的光纖或波導長度要短幾十倍，並可以進一步實現將環形腔、輸入輸出光路、調制器等集成在單片平面波導上，特別適合於研製微型光學陀螺。
  20. A new study of specially spherical - glowing optical fiber is present in this paper, a large core silica optical fiber is melt the ball and is spread all scattering body evenly on the round spherical terminal surface, which is melt the ball to the spherical terminal surface again, thus getting the output optical fiber needed. 4. designing the system of testing the specially spherical - glowing optical fiber

    3 .設計研製了一種特殊球形輸出光纖，實驗中採用大芯徑石英光纖，利用光纖熔接機對石英光纖端面進行熔球，在圓球形端面上均勻塗上光散射體，對所得的球形端面再次進行熔球，從而得到所需要的輸出光纖。
分享友人
分享到 Line

分享到臉書