瞬軸 的英文怎麼說

中文拼音 [shùnzhóu]
瞬軸 英文
i tantaneous axis
  • 瞬 : Ⅰ名詞（眼珠一動; 一眨眼） wink; twinkling Ⅱ動詞（眨眼） wink
  • 軸 : 軸Ⅰ名詞1. （圓柱形的零件） axle; shaft 2. （對稱部分的直線） axis 3. （圓柱形的纏繞器物） roller; spool Ⅱ量詞（用於纏在軸上的線以及裝裱帶軸子的字畫）
  1. Second, adopting the linearity of oil film of the guide bearings, the transient response of the shafts is computed and analysis by integrating with willson method. because of the uncertain position of the shafts in the guide bearing, the model and solution method of nonlinear transient response of the shafts is discussed

    然後結合willson數值積分法，採用線性化油膜力，對機組軸系的線性瞬態響應進行了計算分析，根據機組軸系在瞬態響應中運動的不確定性，給出了由導軸承油膜力非線性所引起的主軸系統的非線性瞬態響應的建模及求解方法。
  2. The equations of motion governing the axisymmetric elastic deformation of finite orthotropic cylindrical shells, involving the effect of transverse shear and rotational inertia, are derived. by applying the reverberation method, the displacement and the resultant forces of the shell in the phase space are expressed. then the transient waves in the finite orthotropic cylindrical shell subjected to the axisymmetric impact are obtained by using inverse laplace transforms. furthermore, the transient solutions are decomposed to the generalized ray integrals and computed numerically

    分析了計及剪切變形和轉動慣性的有限長正交異性圓柱殼中彈性瞬態波的傳播問題，採用回傳矩陣法，在相空間中給出了位移和內力的表達式。再利用laplace逆變換，得到正交異性圓柱殼受軸對稱沖擊作用時彈性瞬態波解，然後將其分解為若干廣義射線積分之和，並用數值方法求解之。
  3. This method of diesel engine fault diagnosis is feasible theoretically. while the fault diagnosis system using this method is rare, just because the crankshaft instantaneous angular acceleration measurement is demanding, such as, good frequency response, high precision

    這種柴油機故障診斷的方法在理論上是可行的，但目前這種成型的系統不多，究其原因是測量曲軸的瞬時角加速度需要系統具有良好的頻率響應特性與高精度。
  4. The voltage ir on core adopts semienclosed insert model. the current element adopts two - stage compensation to have wide load property. the whole plasticenclosed voltage coil. can withstand instantaneous large voltage impulse. the double jewels bearing or the magnetic - propelled bearing can ensure long lifetime. the bipolar aluminium nickel cobalt damping magnet steels have high coercivity, stable magmetic property. the electric function is in accordance with iec521 international standard

    ：電壓鐵芯採用半封閉插入式，電流元件採用二級補償使表計具有寬的負載特性。全塑封的電壓線圈能稱說瞬時大電壓沖擊。雙寶石軸承或磁推動軸承確保表計長壽命。
  5. First, the dynamic stability of braid composite cylindrical shells with the influences of some main factors is introduced. the general governing equations for the nonlinear dynamic stability is obtained. by the hamilton principle. the creep buckling analysis of braid composite cylindrical shells under axial compression and the dynamic stability under nonconservation force are discussed as emphases. in creep buckling question, by means of theoretical analysis, the instaneous critical load and durable critical load of viscoelastic braid composite cylindrical shell under axial compression are obtained and the numerical example is given

    首先介紹了編織復合材料圓柱殼在幾種主要因素影響下的動力穩定性問題，用hamilton原理建立非線性動力穩定性問題的一般性基本方程。然後重點討論了編織復合材料圓柱殼軸壓下的蠕變屈曲問題及非保守力作用下的屈曲問題。對蠕變屈曲問題，通過理論分析來得到了編織復合材料圓柱殼的瞬時彈性臨界載荷和持久臨界載荷，給出了具體的算例。
  6. It is the main purpose of this paper to calculate the energy splitting of ground state and excited states induced by thermally assisted quantum tunneling. first, a brief introduction is given for the theoretical and experimental studies on the magnetic macroscopic quantum effects. then, spin tunneling in a uniaxial ferromagnetic particle in transverse magnetic field is converted to a pseudoparticle moving in effective double - well potential with the help of the effective potential description of quantum spin systems developed by ulyanov and zaslavskii. finally using the periodic instanton method we evaluate the transition amplitude, energy shift and prefactor of wkb exponential and the energy splitting of ground state and the tunneling rate for excited states induced by thermally assisted quantum tunneling are obtained

    文章首先對磁性宏觀量子效應的理論和實驗方面作了簡單介紹，然後藉助于ulyanov和zaslavskii發展的一種等效勢描述方法，把外磁場沿難磁化軸方向時的自旋隧穿約化成在等效雙勢阱中運動的粒子，利用瞬子方法給出基態能級劈裂，最後利用周期瞬子方法分別計算了隧穿幅、能級移動以及wkb前因子，從而給出由於熱助量子隧穿引起的激發態的隧穿率。
  7. In this paper, spindle fem computation model taking solid as basic unit is established. based on this model, firstly, static stress is analyzed and the stress distribution of spindle under various static woking condition is attained ; secondly, transient analysis is carried out

    本文建立了以實體單元為基本單元的大軸有限元計算模型，在此模型基礎上首先進行靜應力分析，得到各靜工況下的應力分佈；隨后進行瞬態的沖擊載荷分析。
  8. In the axes permitted area determined by different given basic design parameters, for different size and different axes position, the instantaneous efficiency variation rule during rise and return and the whole efficiency variation nile during rise, return and the motion cycle of in - line follower cam mechanisms has been studied respectively

    研究了在給定的各種不同基本設計參數情況下所決定的凸輪的軸心許用區內，對于不同大小、不同的軸心位置的凸輪，直動滾子從動件凸輪機構的瞬時效率在推程階段和回程階段的變化規律以及總效率分別在推程階段、回程階段以及整個運動循環周期內的變化規律。
  9. At the same time, the pressure of dynamic state in different opening and closing velocities can be gained, on the basis of results the axial hydraulic force and the fluid force can be calculated, which offers reference and guide foundations for accurately calculating the drive force on water hydraulic valves

    同時cfd解析也可以得到不同啟閉速度下閥腔內的動態壓力，在此基礎上計算出作用於水壓閥閥芯的穩態和瞬態軸向液動力，對精確計算閥芯驅動力具有重要的參考價值和指導意義。
  10. The paper establishes mathematics model of electromagnetic heating system of eddy current field and temperature field, and gives corresponding discrete format with elements as eight nodes, hexahedron equal cell, through calculating eddy - current field to gain the internal heat source that the temperature field needed, to use discrete method to solve the problem of induction - heating part ' s temperature field by axial symmetrical electromagnetic, and then to analyze the characteristic of instantaneous temperature field

    本文建立了電磁加熱系統的渦流場和溫度場間接耦合的數學模型，分析了不同頻率下渦流和溫度的分佈情況，並以八節點六面體等參元為例給出了渦流場對應的離散格式，通過計算渦流場獲得溫度場所需要的內熱源強度，加熱部件的溫度場以軸對稱格式進行離散求解，並對瞬態溫度場有限單元法的求解特點進行了分析。
  11. Instantaneous screw axis

    瞬時螺旋軸
  12. And then we consider the manner in which the bennett linkage is related to the hyperboloid defined by its joint axes and the one defined by its links. we go on to algebraically inter - relate these and an equivalent screw of the overall instantaneous motion, which help us understand its kinetic property

    然後進一步研究了它的四個軸線所組成的單葉雙曲面和它本身的幾何參數的關系，使bennett機構的瞬時運動和某個單葉雙曲面結合起來，有利於我們對其運動屬性的了解。
  13. The compress tests on multiaxial multi - layer warp knit glass - fiber composite ( mmwk ) have also been carried out at high strain rates. the out - of - plane compressive property of multiaxial multi - layer warp knit glass - fiber composite are also rate sensitive. the maximum stress strain and elastic modulus of mmwk composite increase with the rising of strain rate

    首次對多軸向經編玻璃纖維復合材料進行了高應變率下的面外壓縮試驗，實驗結果表明，多軸向經編結構玻璃纖維復合材料在面外力學性能上是應變率相關的，隨著應變率的增加，沖擊壓縮瞬時應力增加，最大應力和最大應變增加，同時初始模量也有增大的趨勢。
  14. The effect of uneven power and compression condition of each cylinder of diesel engine on the crankshaft instantaneous rotation ( velocity and acceleration ) curves and their interrelationship in different cylinder numbers and rotation speeds have been thoroughly analyzed by means of the crankshaft instantaneous rotation curves simulated by computer

    本文通過計算機模擬出多缸內燃機各種作功和壓縮狀況下的曲軸瞬時轉動曲線（速度和角加速度） ，詳細分析在不同缸數和不同轉速條件下，柴油機各缸作功和壓縮功不均衡對曲軸瞬時轉動曲線的影響及其內在聯系。
  15. Instantaneous axis of rotation

    轉動瞬軸
  16. In the second part, considering the depress of the stiffness of concrete caused by its transient thermal strain under fire, the current formulas can be conducted, and then the formulas to calculate the internal force and deformation of rc frame under fire can be conducted by structure mechanics

    （ 2 ）受火構件等效成常溫構件后，再對火災高溫下混凝土瞬態熱應變導致的軸向剛度降低進行修正，推導了受火樑柱的剛度降低修正計算公式，基於結構力學矩陣分析法推導了受火構件的溫度內力和變形計算公式。
  17. The assisting mechanism of hammer in dredge haul is to accumulate energy with wire pull, draw inner pole firstly, release by pin framework, acceleratc core piece, strike hammer shell, produce great instantaneous wallop, drag dredge to break op stone immediately, restore with reposition spring, and work again finally

    該機構在拖網取樣時利用鋼纜拉力蓄積能量拉動內部拉桿，並通過銷軸機構釋放能量加速沖擊芯塊，撞擊殼體產生巨大的瞬時沖擊力，拽動拖網破碎巖石，然後使用復位彈簧使機構復位，重新工作。
  18. A detailed model of non - linear parametric excitation vibration coupling the stay cable and the girder, in which the static sag as well as the geometric non - linearity are considered, is proposed in this paper. based on several numeric examples investigated by the galerkin method composed with the integration strategy, several kinds of factors effecting stay cable parameter vibration are studied. another parameter vibration model by the axial excitation is presented and the corresponding nonlinear equations are derived

    本文創新地提出了斜拉橋拉索-橋面耦合參數振動模型，推導了索-橋耦合非線性參數振動方程組，聯合galerkin法及數值積分方法，對各種特性的拉索進行了數值求解，得出了影響拉索參數振動的各種因素；提出了斜拉索受軸向端激勵參數振動模型，導出了模型的非線性振動方程，使用諧波平衡法得出了產生參數振動需要的最小激勵幅值、共振時瞬態及穩態的振動幅值及索拉力的變化特性，並用數值積分方法對實際斜拉橋拉索進行了計算，分析了拉索阻尼對參數振動的影響。
  19. We have finished the semi - phsical simulation on the single axis turfing platform, which included on board prototype computer, optic fiber gyro and reocaon wheel which saturation chamaeristic has been taken into account

    本文採用瞬時歐拉軸控制演算法，在星載計算機原理樣機的基礎上，考慮反作用飛輪的飽和特性，根據所選擇的反作用飛輪和光纖陀螺，在單軸氣浮轉臺上進行半實物模擬驗證。
  20. Engine is contained in the angular vibrating curves of crankshaft, many scholars do research on the fault cylinder diagnosis by use of the transient speed curves of i. c. engine, and some progresses are acquired, but there are some problems such as the poor diagnosis accuracy in some cases and the limited application range

    內燃機曲軸角振動曲線含有豐富的內燃機作功狀況的信息，國內外許多學者都在研究利用內燃機瞬時轉速曲線診斷故障缸，取得一定進展，但存在精度不高或適用范圍受限制等問題。
分享友人
分享到 Line

分享到臉書