粘著強度 的英文怎麼說

中文拼音 [niánzhāoqiáng]
粘著強度 英文
adhesion strength
  • : 粘動詞(粘附) glue; stick; paste; adhere to; bond
  • : 著助詞1. (表示動作的持續) 2. (表示狀態的持續) 3. (用在動詞或表示程度的形容詞後面, 加強命令或囑咐的語氣) 4. (加在某些動詞後面, 使變成介詞)
  • : 強形容詞(強硬不屈;固執) stubborn; unyielding
  • : 度動詞[書面語] (推測; 估計) surmise; estimate
  • 粘著 : stick together; adhere;bond;agglutination; [工業] adhesion粘著力 adhesion force; 粘著強度 adhesio...
  1. Following is the factors ideating with the surface of old concrete in different way ( including brushing surface, chiseling surface, cleaving surface ), adherence agent ( including cement slurry, cement sand slurry, cement slurry with the u expansion agent ), the freeze - thaw circulation times and air - entraining. as a result, we found that the roughness influence on the adhesion capability of the new on old concrete to a large degree. the larger rougeness is, the larger the splitting tensile strength on the adhension face is. the kind of adhesion agent is also influence on the adherence capability of new on old concrete. the circulation times of freez - thaw have a large influence on the splitting tensile strength of adherence face of new on old concrete. the analysis of tests give some advices to the practical engineering

    主要考察了老混凝土表面不同處理方式(刷毛面,鑿毛面,劈裂面) 、界面結劑類型(水泥凈漿,水泥砂漿, u型膨脹劑水泥漿) 、凍融循環次數等對新老混凝土結面劈拉的影響,以及凍融作用下新混凝土加氣對結面劈拉的影響。試驗結果表明,粗糙對新老混凝土結性能有重要影響,隨結面粗糙的增大,結面劈拉不斷增加;界面結劑類型對新老混凝土結性能有一定影響,在凍融作用下, u型膨脹劑水泥漿結效果不如水泥凈漿和水泥砂漿;凍融循環對結面劈拉有較大影響,加氣能明顯改善新老混凝土結面的抗凍能力。
  2. The soils ( paleudults ) consist predominantly of light brown fine loamy sand to fine sandy loam changing with depth into a brown sandy clay loam and sandy clay with red mottles

    土壤(發育濕潤老成土)主要為淡棕色細壤質砂土到細砂質壤土,隨增加,土壤變為棕色砂質壤土和帶有紅色斑點的砂質土。
  3. The main results are following : ( 1 ) the variation of clay / silt ratio can indicate the secondary clay action of dust depositions ; the variations of magnetic susceptibility and total fe content are inferred to be records of the changeable intensity of bio - pedogenesis ; the variations of sr content and rb / sr ratio can indicate bio - pedogenesis, dissolving and leaching action ; the content of total organic carbon ( toc ) can reflect variation of climate and vegetation during soil formation, it indicates the intensity of weathering and bio - pedogenesis ; the content variation of caco3 can show the intensity of dissolving - leaching action and secondary deposit, which was noted as pseudomycilia in pores and fissures in the sediment, so it can indicate the intensity bio - pedogenesis quite well. these proxy indexes also reflect obvious regional difference of pedogenic environment and the intensity bio - pedogenesis ; namely, secondary clay action, dissolving - leaching action and bio - pedogenesis are all much stronger in south than that in north

    實驗結果表明:粒粉沙比值能很好地指示粉塵堆積物的次生化作用;磁化率和全鐵很好地指示生物風化成壤作用; sr和rb sr比值能很好的指示生物風化成壤作用和淋溶作用;總有機碳( toc )含量的高低,在一定程上反應了土壤發育過程中氣候和植被狀況的變化,指示成壤過程中腐殖質化的程; caco3含量的變化,可以反映了黃土古土壤形成時的風化成壤作用的弱程,指示成壤過程中的淋溶作用和次生碳酸鹽化作用;並且各指標所指示的成壤環境和成壤存在明顯的區域差異,即渭河流域土壤的生物風化成壤作用、次生化作用和淋溶作用均表現出南部于北部。
  4. This specially designed machine tests numerous materials, including varieties of shoe soles, tires, rubber hoses, rubber belts, pvc cloth, pvc boards, package films, acrylics, ftp, abs, and eva. products, semi - products or dumbbell specimens are tested for their tensile strength, elongation, tearing, and adhesive stress - strain, peeling, shearing, and adhesion to metal and rubber

    試驗各種材料及鞋、輪胎、橡膠管、三色膠帶、塑膠布、塑膠板、包裝用膜薄膜等成品、半成品啞鈴狀試片之拉力、伸長率、撕裂、膠力、抗拉應力、剝離、剪力、橡膠與金屬之合力。
  5. Viscous pressure forming ( vpf ) is a new sheet flexible forming process developed in 1990s, which is suitable for the forming of high strength, low plasticity and difficulty deformation materials and has wide application in automotive manufacturing and aeronautic industry

    性介質壓力成形( viscouspressureforming , vpf )是20世紀90年代提出的一種新的板材軟模成形技術,適合於低塑性、高、難變形材料復雜形狀件的成形,在航空航天、汽車製造等工業領域有廣闊的發展空間。
  6. The experimental results showed that the bed temperature and the adhe - sive concentration and especially the fluidizing gas velocity had great influence on the granule ' s strength

    結果表明,在本實驗范圍內,流化氣速對顆粒的影響顯,床層溫結劑濃對顆粒也有較大的影響,而且均是非單調的。
  7. In sintering process, for melted mineral fines bind unmelted core ores when cooled, the self - intensity of binding phase in iron ores is one of the basic indexes to estimate sintered binding status

    摘要在鐵礦粉燒結過程中,熔化的礦粉在冷卻過程中起結周圍未熔礦粉的作用,因此這一結相的自身是衡量燒結礦固結狀況的重要指標之一。
  8. In addition, a new analytical method was used to solve the shear strength of the fiber / epoxy interface. the result showed good agreement with that from the kelly - tyson equation. meanwhile, according to the sfc tests of the single fiber reinforced epoxy matrix composites treated by four types of surface treatments, the interfacial adhesion conditions were estimated by critical fiber length, interfacial shear strength and single fiber microdamge mode

    此外,文中對單纖維復合材料斷裂實驗運用了新的解析方法,求解了玻璃纖維環氧復合材料界面的剪切,與kelly - tyson等式方法求得的界面剪切很好的一致性;同時,對四種不同表面處理劑處理的單纖維復合材料斷裂實驗進行了分析,從臨界纖維長、界面剪切和單纖維斷裂實驗中纖維斷點周圍基體形貌評價了界面的結情況。
  9. The main content is : splitting tensile experiments were carried out about the standardized cube bonding specimens ( 150x 150x 150mm3 ) of the new - old concrete after high temperature. the temperature is divided into 9 groups from normal atmospheric temperature to 900, the cooling styles are natural cooling and spraying water cooling ; different interfacial treating methods : brushed with steel - wire brush, man - made chiseling ( not evenly ), man - made chiseling ( quite evenly ) ; different interfacial agents : no interfacial agent, neat cement paste, cement paste mixed with 10 % expanding agent

    主要內容有:本文對75個高溫作用后的標準立方體新老混凝土結試件進行了劈拉試驗,溫從常溫到900c分9個溫段,降溫方式分自然冷卻和噴水冷卻兩種。重考察了溫、降溫方式、界面粗糙及界面劑對新老混凝土結劈拉的影響規律,闡述了高溫后下降的機理。
  10. Standard test method for bond strength of ceramic tile to portland cement

    瓷磚和硅酸鹽水泥粘著強度的標準試驗方法
  11. Test method for bond strength of latex systems used with concrete by slant shear

    使用斜剪切法測定同混凝土一起使用的乳膠粘著強度的測試方法
  12. Self adhesive tapes - measurement of bonding of thermosetting adhesive tapes after curing ; german version en 12033 : 1996

    帶.熱硬化后膠粘著強度測量
  13. Self adhesive tapes - measurement of bonding of thermosetting adhesive tapes during curing ; german version en 12032 : 1996

    帶.熱硬化中膠粘著強度測量
  14. The conclusions are as follows : ( 1 ) the compose of rpc has an effect on the bond behavior between cfrp bars and rpc : the bond strength between cfrp bars and rpc will increase with the decrease of water to cement ratio, but doesn ’ t obviously ; the adding of steel fiber can improve the bond behavior between cfrp bars and rpc significantly, but steel fiber will also effect the workability of rpc, consider the bond behavior and economy, the content of steel fiber should be 2 % ;. silica fume can improve the bond strength between cfrp bar and rpc, but the bond strength isn ’ t in proportion to the content of silica fume, in this experiment, the optimal content of silica fume is 0. 25 to 0. 35

    試驗研究得到如下結果: ( 1 ) rpc的材料組成對rpc與cfrp筋的影響: cfrp筋與活性粉末混凝土的水膠比的降低而提高,但是提高的幅並不明顯;鋼纖維的摻入,可以顯提高cfrp筋與rpc的,但是鋼纖維的增效果與摻量並不是線性增加的關系,從綜合經濟性及兩方面考慮,鋼纖維的最佳摻量為2 % ;摻入硅灰有利於改善結性能,但其摻量有一最佳范圍,在本次試驗中,硅灰的最佳摻量為0 . 25 0 . 35 。
  15. Aminobenzenesulfonic acid super - plasticizer is selected though cement paste test, which be provided with high water - reducing property, low slump loss and good compatibility with cement. according to the request of super high early strength, admixture rf is obtained though tests to compare performances of different accelerators and admixtures. experimental research and analysis are carried out on coarse aggregate ' s grain - size effect and composite aggregate ' s bulk - density to take sensitivity of coarse aggregate into account

    通過水泥凈漿試驗比較選擇了減水率高、坍落損失小、與水泥適應性好的氨基苯磺酸鹽高效減水劑;針對超早的性能要求,試驗比較了不同早劑及早性摻合料的性能表現,研製了早性能顯、與高效減水劑和水泥相容性較好的rf摻合料;考慮到修補混凝土對粗集料粒徑的敏感性,對粗集料粒徑效應及混合集料堆積密進行試驗研究與分析;並對修補混凝土的抗折、抗壓、新老界面以及抗凍性等進行了試驗研究。
  16. 3 stable adhesive strength can be obtained with a variety of smd

    對于各種表面零件,可獲得安定的接
  17. Based on the study result, the paper has made a systematic study on the compounding and performance of binding mortar. compared with tradition binding mortar, this new type binding mortar has better performance of water resistance, frost resistance and crack resistance, etc

    研究結果表明,新型結砂漿具有比傳統結砂漿更優良的性能:和易性改善,、耐水性以及抗裂性顯提高,抗凍性良好,從而保證了新型結砂漿具有良好的耐候性。
  18. Methods of test for mortar for masonry - part 12 : determination of adhesive strength of hardened rendering and plastering mortars on substrates

    圬工灰漿試驗方法.第12部分:襯底上的硬化打底和灰漿測定
  19. Deterioration mechanism of the bond property between rusty rebar and corroded concrete was discussed. because that the bond strength between the corroded rebar and concrete is affected by many factors, and the relation between the factors and bond strength are highly nonlinear, to build the any calculation model will be very difficult. bp nn model was built up herein to predict the ultimate bond strength between the rebar and corroded concrete, good results are achieved

    闡明了銹蝕鋼筋與混凝土之間結性能的退化機理;鑒于銹蝕鋼筋混凝土之間的結性能受到多因素影響,且影響因素集與極限之間存在復雜非線性關系,建立了bp神經網路模型預測銹蝕鋼筋與混凝土之間極限結力,取得了較好的預測效果。
  20. Abstract : the cohesive strength, the evenness of the cohesive stren gth, the shrinkage after washing and ironing of the clothing laminated lining mat erials insert great affects on the properties and qualities of the garments. to i nvestigate these factors and influences of them will be very helpful for the lin ing material selecting and quality improving of the garment manufacture

    文摘:合襯的性能,如的均勻性,水洗縮率和熨燙縮率對服裝的性能和質量會起到較大的影響,分析與了解這些影響的作用和因素,對正確選擇和使用合襯,提高服裝的質量有積極的意義。
分享友人