結合角鋼 的英文怎麼說

中文拼音 [jiēgějiǎogāng]
結合角鋼 英文
connecting angle
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 角 : 角Ⅰ名詞1 （牛、羊、 鹿等頭上長出的堅硬的東西） horn 2 （古時軍中吹的樂器） bugle; horn 3 （形狀像...
  • 鋼 : 鋼名詞（鐵和碳的合金） steel
  • 結合 : 1 （發生密切聯系; 聯合） combine; unite; integrate; link; binding; coalition; cohesion; connectio...
  1. The penstock for jinhe hydropower station is less in china, as it has a obliquity of 50 on the bending and inclined straight section in space ; for which the manufacture and installation are smoothly completed under the construction condition in the tunnel and the environment of alpine region with available construction method in combination of limited construction method for the key technical problems of the manufacture and installation of the penstock, which provides a reference for the constructions under the similar circumstance

    摘要金河水電站壓力鋼管的空間轉彎和斜直段的50傾角在國內是比較少見的，針對鋼管製造、安裝的技術難點，在高寒和復雜的洞內施工環境中，結合有限的施工手段，採取有效可行的施工方法，順利完成了製造、安裝任務，對類似環境下的施工提供了一定的借鑒。
  2. The test results of inserted foundation with shear fastening apparatus showed that the interaction betwe en bond stress and shear fastening apparatus is very great, however, they could n ' t be superposed in principle

    在帶有承剪連接件的插入角鋼上進行試驗結果表明：粘著應力與承剪連接件的受力存在很大的附加作用，但是，在原則上不允許進行組合疊加。
  3. This paper focuses on the research of the stress mechanism of the ribbed shell structure in statics, dynamics and under the explosive load on the basis of the engineering practice of cave depot of single aircraft. in this paper, according to the classical shell theories, the basic differential equilibrium of the ribbed shell structure and the finite element analysis of 3d rippled plate are established, in which the function of annular ribs reinforcement bars and 3d ripped steel plates are distributed in the range of the steel, and the functions along the longitude direction of tension, bending, and torsion are neglected ; applied with dynamic analytical theory, the dynamic model of ribbed shell structure and the analytical theory model of elastic - plastic are set up ; the triangle series method is used to solve the displacement and stress under the distributed load and the concentrated load of the ribbed shell structure

    本文以軍用機場地面單機掩蔽庫工程建設為工程背景，首次對內襯三維波紋鋼板混凝土拱型復合結構的受力機理進行了靜力、動力和爆炸荷載的分析研究。根據將橫肋、鋼筋及三維波紋鋼板的作用均勻分佈在殼體范圍內的情況，忽略橫肋、鋼筋及三維波紋鋼板沿殼體母線方向的抗拉、抗彎及其抗扭作用，首次推導出了內襯三維波紋鋼板混凝土殼體的微分平衡方程，建立了有限元計算模型，並採用三角函數法，求解了三維波紋鋼板混凝土拱型復合結構在分佈荷載和集中荷載作用下的位移響應和應力響應，並與普通殼體進行了比較。
  4. This paper analyses the stress and deformation of the two lining structure types of the surge shaft surrounded with crush rock under the action of high water pressure by using fem, compares the two lining types ' s merits and demerits in stress, deformation, fracture state, the combining bearing of surrounding rock and lining structure, the safety and economics

    本文針對圍巖條件比較破碎，裂隙發育的調壓井洞室結構，就兩種襯砌結構型式分別進行了高水頭作用下的有限元數值模擬，從調壓井襯砌結構選型角度分析對比了兩種襯砌結構型式在圍巖及襯砌結構應力與變形、襯砌結構鋼筋混凝土開裂、圍巖與襯砌結構聯合承載、結構安全儲備、經濟等方面的優劣。
  5. As a whole, the research work of this dissertation can be summarized follows : 1. in accordance with my design patent, namely, reinforced earth retaining wall of r c net, and based on the analysis of the work mechanism, failure pattern, bearing capacity and stability of the reinforced earth, a new concept is expounded, namely, the reinforced earth wall which is thought of as a compound structure increase not only c but also ~ in comparison with non - reinforced earth. some bearing capacity formula are first introduced under the circumstances that the reinforced earth wall fails because of the breakage of material or inadequate cohesion between reinforcements and soil

    歸納起來，具體的研究和所獲得的一些重要成果如下： 1 、結合本人的設計專利? 「鋼筋混凝土網格式加筋擋墻」及工程實踐，在對加筋土的加筋機理、破壞模式、承載力和穩定性等方面進行深入分析的基礎上，提出了一個新概念，即經過加筋后的土體作為復合結構與原土體相比，不僅提高了內聚力，而且也提高內摩擦角；並在此前提下首次導出拉力破壞和粘著破壞兩種情形下的承載力公式，然後進行了穩定性分析。
  6. Hexagon fit bolts with hexagon nut, for steel structures

    鋼結構用帶六角螺母的六角頭配合螺栓
  7. High strength hexagon fit bolts with large widths across flats for structural steel bolting

    結構鋼螺栓裝配用的帶大寬度對邊的高強度六角頭配合
  8. The hook tooth with a positive rake angle can be used for all kinds of steel, especially for long - chip and hard - to - cut materials, for example construction steel and hardened steel, as well as high alloy materials

    帶有正前角的鉤形齒能用於所有種類的鋼材，尤其適用於長片和難以鋸切的材料，例如結構鋼、粹火鋼以及高合金材料。
  9. This vessel is a steel cruiser of all - welded construction, two - layer deckhouse, catamaran, double engines, double propellers, double rudders and round bilge, with two semi - hulls connected by bridge, transverse framing for main hull, and longitudinal and transverse composite framing for the superstructure deck. the outlook is matched with the modern buildings and greening overview on both sides of the pearl river. the interior decoration layout is characterized by the multi - functions, luxury, comfort, catering and recreation

    本船為鋼質全焊接結構二層甲板雙體雙機雙槳雙舵圓舭型線，兩片體以連接橋相聯，主船體橫骨架上層建築甲板縱橫混合骨架式，外觀具有與珠江兩岸現代化建築及沿岸綠化景緻協調內部裝飾布置以多功能豪華舒適以餐飲娛樂為特色的觀光游覽船，航行於珠江沙角水域以內河面。
  10. This type of joint have been widelu used in the steel pipeline system for connection, it has a very good self - compensation performance while temperature change and angle deviation of the pipeline axis

    鍛壓卡箍式柔性管道接頭該產品具有溫度自補償和角度自補償功能，是鋼制管道系統中廣泛應用的聯接件，其結構合理、耐壓強度高、密封性能好，安裝維修方便。
  11. Based on the results, the eccentrically braced frame has the advantage of higher initial stiffness, load - bearing and energy consume ability. through the limit state analysis principle, the limit load was calculated by assuming the same destroy pattern of braced frame as that in the experiment. comparing the theory limit load with the measured, a good agreement was founded. it shows that the limit state analysis is really a practicable way analysed the reinforced concrete frame braced with eccentric steel

    應用極限分析中的極值原理對偏心角鋼支撐鋼筋砼框架進行極限分析時，首先擬定與試驗結果相一致的結構倒塌破壞模式，然後根據虛功原理建立了結構在極限狀態時極限承載力的計算公式，從所求的權限荷載的理論值與實測值的比較來看，理論計算值與試驗的實測值基本吻合，這說明利用本文擬定的結構破壞模式對偏心角鋼支撐框架結構進行極限分析是一條可行的途徑。
  12. To increase the rate of hitting the grade of liquid steel based on match between converter and continuos caster in capacity is considered as a promising way to improve process control and make production cost - efficient at steel making division. based on lgmis and the model of process - control of converters, the factors, which impact to the hit ratio of grade of liquid steel, have been investigated in details. the influence of quality and availability of primary raw materials, such as hot metal, semi - steel and mixture hot metal and semi - steel, on quality of liquid steel has investigated

    本文結合攀鋼轉爐煉鋼工藝現狀及全連鑄對鋼水質量的要求，從改進煉鋼過程質量控制的角度，以轉爐連鑄機爐機匹配條件下提高鋼種煉成率為目標，在現有lgmis系統和轉爐煉鋼過程靜態控制模型的基礎上，詳細分析了攀鋼轉爐煉鋼的鋼種煉成率以及影響攀鋼轉爐煉鋼的鋼種煉成率的因素，分析了轉爐煉鋼主原料（鐵水、半鋼、混合鐵水）的質量和物流條件對攀鋼煉鋼過程質量的影響，提出了通過控制轉爐煉鋼主原料質量和物流條件改進煉鋼過程質量控制的策略。
  13. Concrete filled steel tube ( cfst ) arch bridge is a new type of bridge which is widely applied in china recently, and it is a relatively ideal structural form for long span arch bridge. with the background of the practice of liantuo bridge, in the view of point of feasible in technology and reasonable in economy, the key techniques and difficulties in the construction of cfst arch bridge are analyzed and discussed in the thesis. the disadvantages in the current design and construction and the improvement method are also indicated

    本文以蓮沱特大橋工程實踐為背景，以主拱施工研究為主線，對鋼管混凝土拱橋重難點施工工藝，從技術上可行、經濟上合理的角度出發，詳細的進行了分析闡述，並指出了設計施工中存在的不足和今後需改進的方向；通過對鋼管混凝土拱橋施工過程中內力的計算，確定了拱肋施工最不利荷載工況下加載重量、壓重順序和張拉臨時預應力束等一系列施工措施，並將計算結果與現場監測觀測數據進行了比較分析，為今後進一步研究這類結構提供了參考。
  14. The conclusions are as follows : ( 1 ) high - pressure water - atomization can be used to produce a pre - alloyed steel powder with high apparent density, high green strength, size - stability after sintering and low hydrogen - loss content ; ( 2 ) the higher smelting temperature and / or water pressure, the finer particle size of steel powders ; ( 3 ) when the atomization angle holds in a reasonable value ' s range the obtained powder will have a better particle size distribution ; ( 4 ) an optimum atomization technological parameters : liquid steel flux, water pressure and water prick angle was obtained ( 5 ) reduction variables ( temperature, holding time, material - bed ' s thickness and reducing gas flux ) have a significant effect on the particle agglomeration and properties of final powder was given ( 6 ) different alloying methods were developed to modify properties of ferrous powder materials and hence to broaden its applications in ferrous powder metallurgy industry

    本文系統研究了水霧化預合金鋼粉生產工藝及合金化方法對鐵基粉末冶金材料性能影響，詳細研究了冶煉、霧化、還原工藝參數對預合金鋼粉化學成份和物理性能影響，並得出如下結論： （ 1 ）採用高壓水霧化技術可用於生產高密度、高強度、尺寸穩定性的低氫損含量的水霧化預合金鋼粉。 （ 2 ）冶煉溫度越高，高壓水壓力越大，所得生粉顆粒粒度越細。 （ 3 ）水錐角調整在一個適當角度范圍內可獲得粒度組成較好的生粉。
  15. Also analyzed are the influences of cfrp ratio, angle steel ratio, slenderness ratio and eccentricity to the mechanical properties of the columns

    分析結果表明：含碳纖維布率和含角鋼率越大，構件長細比越小，以及荷載的偏心距越小，復合加固效果越好。
  16. In this paper, the buckling behavior of cold - formed angle members is studied by non - linear finite element method. the influence of the width - thickness ratio of the single cold - formed angle column under axial load is analysed. the criteria of flexural buckling and torsional - flexural buckling for cold - formed egual - leg under axial loads is presented. according the calculating results of the ansys finite element method, the stability - coefficient formulas are simulated for the cold - formed loading single angle members of flexural buckling and torsional - flexural buckling

    本文運用非線性有限元法對冷成型單角鋼的穩定性能進行了研究，分析了寬厚比對冷成型單角鋼軸壓桿穩定性能的影響，給出了等邊冷彎角鋼發生彎曲屈曲和彎扭屈曲的判斷條件，根據ansys有限元的計算結果擬合出了冷成型單角鋼軸壓桿在發生彎曲屈曲以及在發生彎扭屈曲時的穩定系數公式，在此基礎上得出了冷成型單角鋼軸壓桿在所有長細比情況下的穩定系數公式。
  17. Then after a semi - rigid joint behavior can be modeled as a finite stiffness rotation spring, base on rotation and displacement equation derive the element stiffness matrixes with semi - rigid connections where the effects of jointed flexibility and shear forces in the connection deformations have been considered in and fixed - end forces are modified. finally, a program for calculating system reliability of semi - ridge steel frames with monte carlo method and finite element analysis has compiled for calculating and analyzing. by calculating results of several examples for steel frame in semi - rigid joints case show the change of joint stiffness and other kinds of factors affect the system

    接著本文在介紹和分析半剛性連接彎矩和轉角關系模型的基礎上，用帶有轉動剛度的彈簧表徵半剛性連接，推導出半剛性連接的剛度矩陣，對固端力進行修正，同時考慮了剪切變形的影響，編制了半剛接鋼結構平面框架的有限元程序bhpfl ，並在其基礎上編制了基於蒙特卡洛法的montecarlo - bhpfl有限元相結合的方法，進行體系可靠度的分析。
  18. Abstract : this paper discusses the method of transformation of hydraulic steel - belt float transfeeder at tank area with plc. and the possibility is analysed from technique and economic performance

    摘要:文章結合作者的工作實踐，論述了用plc改造罐區鋼帶浮子液位變送器的方法，並從技術角度和經濟效益上分析了這種方法的可行性。
  19. Though the pseudo - static test of three prototype - modal sandwich wall with angled - steel column, seismic behavior are discussed. based on the concrete nonlinear analyzing theory, this paper constructed the finite element modal by ansys program and proved the modal by test result. designed & further improved methods are presented on the conclusion of tests and calculations

    本文通過對三個角鋼邊框復合剪力墻板的原型擬靜力試驗，研究了角鋼邊框復合剪力墻的抗震性能，同時在現有混凝土非線型分析理論的基礎上，採用ansys有限元分析程序建立了墻板的有限元模型，結合試驗數據對模型進行了驗證。
  20. Based on experimental research and theoretical analysis, investigations on the new type of joint are made systematically, the main contents and results include the following items. 1 four specimens of new joints between cfrt columns and steel beams are designed. by low - cyclic reversed load test, skeleton curves of new joints and shearing deformation in joint core area are studied, the influence of parameters, such as concrete cores, length of stiffener, and relative dimensions of column and beam, is discussed

    本文在分析現有節點方案特點的基礎上，提出了角鋼加勁式節點方案，並採用試驗和理論分析相結合的方法，對這種新型節點進行了系統研究，主要研究內容與成果如下： （一）設計了4個新型方鋼管混凝土柱?鋼梁節點的試件，通過對新型節點的低周反復荷載試驗，研究了新型節點的骨架曲線和節點核心區剪切變形等，探討了內填混凝土、加勁肋長度和樑柱相對尺寸等對節點抗震性能影響。
分享友人
分享到 Line

分享到臉書