統調電路 的英文怎麼說

中文拼音 [tǒngdiàodiànlù]
統調電路 英文
ganging circuit
  • 統 : Ⅰ名詞1 （事物間連續的關系） interconnected system 2 （衣服等的筒狀部分） any tube shaped part of ...
  • 調 : Ⅰ動詞1 （配合得均勻合適） harmonize; suit well; fit in perfectly 2 （使配合得均勻合適） mix; adju...
  • 電 : Ⅰ名詞1 （有電荷存在和電荷變化的現象） electricity 2 （電報） telegram; cable Ⅱ動詞1 （觸電） give...
  • 路 : 1 （道路） road; way; path 2 （路程） journey; distance 3 （途徑; 門路） way; means 4 （條理） se...
  • 電路 : [訊] circuit （ckt）; electric circuit; electrocircuit電路板 circuit board; 電路保持 guard of a c...
  1. This paper mainly aims at the characteristics of the hardware and software structure of the parallel computer on satellite, and has fulfilled researches of fault tolerant technique in three aspects of control theories and engineering : the first research of the system level fault - tolerant module is based on the system structure of the parallel computer on satellite, a kind of cold backup module and a kind of hot backup module for multiprocessor computer have been put forward. then the research of software fault tolerant technique which is based on the operate system named rtems has been carried, the mission level fault - tolerate arithmetic and the system level fault - tolerate mechanism and strategies based on the check point technique have been put forward, at the same time the self - repair technique of software which has used the technique of system re - inject has been studied. finally the technique of components level fault - tolerant based on fpga has been studied, a kind of two level fault - tolerant project which aims at the fault - tolerant module of the parallel computer on satellite has been put forward, and the augmentative of circuit that project design realization need is little, this project can avoid any breakdown of any part logic circuit of the fpga

    本課題主要針對星載并行計算機體系結構及軟體結構的特點，從如下三個方面進行了容錯控制理論研究和實踐工作:首先進行了基於星載多cpu并行計算機體系結構的系統級容錯模型研究，提出了一種多cpu冷備份容錯模型和一種多cpu熱備份容錯模型;然後進行了基於rtems操作系統的軟體容錯技術研究，提出了任務級容錯調度演算法以及基於檢查點技術的系統級容錯恢復機制和策略，同時研究了利用系統重注入進行軟體在線自修復的容錯技術;最後研究了基於fpga的部件級容錯技術，提出了對容錯模塊這一星載并行計算機關鍵部件的兩級容錯方案，實現該方案所需增加的電路少，可避免板級晶元以及fpga晶元內部任何邏輯發生單點故障。
  2. The local network resoure management system is mainly engaged in the lacal network resoure management, at the same time and the network quality managerment as well, also including network line - pipe management, equipment management, configure management, topology management, attemper management and systimatic analysis, the main equipments include pdh, sdh, dwdn, idlc, pon, fwa, adsl, bits etc. by means of the main equipments " s resoure attemper and running state, we can finds out something abnornal in operation, from the whole point of local network, adjusting network is to be made to reach overal optimiztion. ensuring the network operating quality, realizing the the dispatching solution on the basis of network resource management and circuit closed - loop dispatching circulation

    本地網網路資源管理系統是側重於本地網網路資源的管理，同時兼顧網路質量管理。重點網路管線管理、設備管理、配置管理、拓撲管理、調度管理以及統計分析，主要設備包括pdh 、 sdh 、 dwdn 、 idlc 、 pon 、 fwa 、 adsl 、 bits等。通過主要設備的資源配備和運行狀態，該系統發現處理運行異常，從本地網全局的角度調整網路達到整體優化，保證網路的運行質量，在網路資源管理的基礎上，實現調度方案的生成，以及電路通道的閉環調度流程。
  3. According to the system technology require, adopting singlechip realize open loop digital control of hdclsm ; using v / f conversion and complex key - control method realize digital setting of system parameter, such as velocity ; using micro - stepping control insure the motor running more smoothly ; adopting debasing speed control method to eliminate the mechanical impact of distance termination effectively ; at the same time, analyzing main power circuits drive circuit and protect circuit of system, completing hardware design and facture and software programming and debugging ; at last, making a whole test in hybrid rotary step motor. the experiment result indicates that this control system reaches the qualities required and run smoothly also

    根據系統技術要求，採用單片機實現了混合式直流直線步進電動機的開環數字控制；利用v f變換和復合鍵控方法實現了系統轉速等參數的數字設定；利用細分控制技術保證了電機運行的平穩性，並進行了波形分析和理論研究；採用單片機軟體降速控制策略解決直線步進電機行程末端的機械沖擊問題；同時對主功率電路、驅動電路和系統保護電路進行了分析，完成了硬體設計、製作和軟體編程、調試，最後在混合式旋轉步進電動機上進行了全面測試。
  4. The control system included the following units : video decode unit, data format conversion unit, fpga controller, cache unit and d / a monitor. the above self - design control unit plus row and column power supply units make the whole fed driving system, thus drove the 25 inch sample and realized color video display. the 25 inch vga sample thus fabricated could display video images, and obtained its brightness 400cd / m2, contrast ratio 1000 : 1, 256 circuit gray scale

    本文介紹了fed驅動系統的工作原理，重點論述了基於fpga的vga級彩色fed新型驅動控制系統的研製，這種新型fed驅動控制系統主要包括視頻解碼電路、數據格式轉換電路、 fpga控制電路、數據緩存電路和d / a監控電路，配合后級列灰度調制單元和行掃描單元，組成完整的fed驅動系統，可以驅動25英寸vga級fed顯示屏，實現彩色視頻顯示，樣機亮度達400cd / m2 、對比度為1000 : 1 ，灰度等級為256級。
  5. Secondly, it describes the hardware system of the exoskeleton hand, including the circuit design of the driver, the fpga - based motion controller, the processing and the a / d conversion for the sensor signal

    其次，設計了外骨骼手底層控制系統的硬體電路，包括微型驅動器模塊電路的設計，基於fpga的運動控制器電路的設計，傳感器信號調理以及模/數轉換電路的設計。
  6. The control system of furnace " s temperature has been widely used in every walk of life, as an important link of repair and manufacture of the electrical equipment such as electromotor transformer etc., soaking lacquer drying craft has some especial requests on drying crafto this article starts with the analysis of drying chamber " s configuration, analyzed its configuration limitation and control function limitation according to the factory " s situation and advances the conception of heated air drying circulation, in addition, this article adopts an intellectualize a / d module, a development sampling tuning - voltage circuit, and presents the method to measure online the insulation resistance of products in order to improve constantly products quality

    而浸漆乾燥工藝作為電機、變壓器等電氣設備的修理、製造中的重要環節之一，對乾燥過程的質量要求有一定的特殊性。該文從乾燥爐的結構分析入手，聯繫到工廠的實際情況分析了結構功能缺陷和控制功能缺陷，提出了熱風循環乾燥的概念，同時，選擇了較為先進的a d板卡、熱電阻信號調理板等專業化智能卡，運用數字pid控制技術，構成了一個較有特色的計算機控制系統。此外，該文還從保證乾燥品質量的角度，採用智能化交流模塊和自製采樣調壓電路的方法，提出了在線檢測產修品的絕緣電阻的方法和手段，以確保企業產品質量不斷提高。
  7. Based on the mesne layer theory, the centralized stress cantilever was designed, and the infection factors was analysed in detail. in the designing of controditional circuits, comparing with several troditional methods and the merits was integrated, a novel circuits with fewer components and higher performance was designed, and by using the micro assembly techniques, the circuits was minisized

    文中以材料力學的中性層理論為理論依據，設計了結構獨特的應力集中結構懸臂梁，並對各影響因素進行了詳細分析。在調理電路的設計中，通過對幾種傳統方案的比較，綜合了它們的優點，設計了一種元件少、性能佳的新型電路，並採用微組裝技術，實現調理電路微型化。
  8. In practical design, not only nonideal factors from noise, mismatch, offset etc. are taken into consideration, but also the desired sub _ adc performance is achieved with reduced power dissipation

    在具體電路設計中，不僅充分考慮了噪聲、失調和失配等非理想因素，而且在實現系統對子adc的指標限制前提下，降低了功耗。
  9. According to the design principle of systems construction, this paper offers the collectivity layout projet which particularly introduces design thought in some aspects, for example : in function, in physical structure, in configure of software and hardware and son on. finally, this paper detailedly introduces the principle, the function, the flow and the systems structure of six subsystems which involved in urban public safety traffic management control system. the six subsystems are : geography information system

    按系統建設的原則，論文給出了系統建設的總體設計方案，從功能上、物理結構上和軟硬體配置等方面詳細介紹了城市公安交通管理控制系統的設計思路，最後，論文詳細地介紹了城市公安交通管理控制系統的六個子系統? ?地理信息系統、指揮調度管理系統、交通信號控制系統、車輛闖紅燈自動拍照系統、交通信息發布系統和電子數據大屏顯示系統等的原理、功能和處理流程和系統構成。
  10. This paper starts the research of the liquid floated pendulous accelerometer testing system according to the engineering. at first, this paper gives the brief introduction of the history and present status of accelerometer and its testing technology, the working principium and math model of the liquid floated pendu - lous accelerometer, and then, decides the binary width pulse force retrim loop as the design proposal of testing system, researches the transfer function of every part in the system emphasizly, analyses the stability of the whole accelerometer testing system from the angle of control theoretics by the open loop transfer function of system, and designed the correcting net, analyses the basal problems such as resolution, sampling restraint, precision and so on, designs the hardware testing circuits such as preamplification, band - pass filter, alternating amplifier, phase sensitive demodulatorn, pulse - width modulation, frequency scale circuit, moment current generator. finally, using the graphics program language labv - iew which is designed for testing field especially by ni accomplishes the solfware design of testing system, realized the testing functions

    首先對加速度計及其測試技術的發展歷史和現狀，液浮擺式加速度計的工作原理和數學模型等作了簡要的介紹，然後確定了以二元調寬脈沖再平衡測試迴路為設計方案，並從控制理論的角度進行了分析，著重研究了系統中各部分的傳遞函數，利用系統開環傳遞函數分析了系統的穩定性，同時設計了系統的校正網路;分析了二元調寬脈沖再平衡測試迴路的解析度、采樣約束以及測試精度等基本問題，並按照系統分析的結果設計了包括前置放大、帶通濾波、交流放大、相敏解調、脈寬調制、頻標電路以及力矩電流發生器等測試系統各部分硬體電路，驗證了電路的正確性，最後按照測試系統的要求，採用了美國ni公司專為測試領域所開發的虛擬儀器工具? ? labview作為測試軟體開發工具，利用該圖形化編程語言完成了測試系統軟體部分的設計，實現了測試功能。
  11. It integrates the functions of servo amplifier, dynamic operator, position transmitter and remote communication. many new functions have added to its original ones, such as the real - time logical judgment, malfunctions self - diagnosis, alarm & protection, led display, on - line setting and adjustment of functional parameter and position transmitter, power - absence data auto - protection, watchdog system protection, and the long - range communication with pc

    系統集伺服放大器、電動操作器、位置發送器及遠程網路式通信功能於一體，在保留對應部分原有功能的同時，還新增了邏輯實時判斷、故障實時監控、 led動態顯示數據、功能參數設置、掉電數據自保護、 「看門狗」電路保護、位置發送器在線調節、與遠程工控機數據通信等眾多功能。
  12. The fuzzy control strategy is used for short period prediction of the microwave power and a fuzzy pid controller is used to control the trigger angle of silicon controlled rectifier ( scr )

    利用硬體超調自動保護電路和模糊pid控制技術對醫用微波治療儀功率控制系統進行了設計，並簡要介紹了該儀器的原理及功能。
  13. We have designed the scanning and control system, which includes a pre - amplifier, a pid feedback and scanning - control circuit, high - voltage amplifiers and so on. the function of controlling scan and feedback has been realized

    設計完成包含有前置放大電路、 pid反饋和掃描控制電路、高壓放大電路等掃描控制電路在內的掃描控制系統，完成各部分電路性能的測試及功能調試，實現反饋和掃描控制。
  14. The way used in this paper, which uses digital method to design the governor in the simulation system and draws the software on replacing the analogy circuit, can overcome these disappointments. in addition, a piece of lcd is used to make the operation visible and easy to adjust

    本文對該模擬系統中的調速器採用微機數字化設計方案，利用計算機軟體去取代模擬電路的功能，可以很好地克服以上缺點。此外，在設計中引入lcd顯示，操作直觀、便於監視和調整。
  15. Static and dynamic trial experiments indicate that the system, not only can well simulate the prime governor and self _ equilibrium characteristics of a prime mover with its simple hardware line, small size and versatility, but also can highly improve the whole system ' s control precision, reliability and stability when compared with the system design of the analogy circuits

    靜態、動態測試實驗表明：該控制系統，不僅硬體線路大為簡化、體積小、通用性強，能夠很好地實現對原型調速器及原動機自平衡特性的模擬，而且與模擬電路的設計方案相比，整個系統的控制精度、可靠性和穩定性等大幅度提高，具有明顯的優勢。
  16. 3. with comprehensive improvement of transponder including structural adjustment to lna ; optimization of ( phase locked loop ) pll filter ; structural adjustment to the transmitter and phase error adjustment to the intermediate frequency demodulation circuit, we have successfully enhanced sensitivity, expanded dynamic range, increased transmitting power and improved the spectrum purity ; decreased capture time for pll ; improved the signal quality after demodulation ; reduced its volume and power consumption. 4

    3 、對通信機的全面改進，包括lna結構的調整、鎖相環環路濾波器的優化、發射部分結構的調整以及中頻解調電路的相差調整，提高了系統的接收靈敏度、改善了本振的頻譜純度、減少了鎖相環的鎖定時間、使中頻解調后的信號質量大為提高，同時還減少了體積、節約了系統的功耗。
  17. The thesis studies the principle on the ppm modulation and demodulation, and analyses the performance of the ppm signal demodulation circuits and designs corresponding circuits

    研究了ppm調制與解調原理，分析了ppm信號解調電路系統性能並進行了電路設計。
  18. The design of the amplifier is described in detail and the noise in the circuit is calculated in the third chapter. several demodulating methods are compared and the design of the demodulator is described in detail in the fourth chapter

    第四章，對幾種信號解調方式進行了比較，並對系統採用信號解調電路的設計原理和方案進行了詳盡的分析。
  19. Then this paper deals with the design and realization of the smart - antenna receiver system architecture. and the receiver is divided into four modules, including rf front - end module |, if demodulation module, analog to digital conversion module and frequency synthesis module

    隨后在此基礎上，對應用於w - cdma系統智能天線接收機進行了系統設計分析，並給出了實現方案，主要包括射頻前端電路模塊、中頻解調電路模塊，參考頻率合成電路模塊和數模、模數轉換電路模塊四部分的設計與實現。
  20. With the rapid development of semiconductor, digital integrated circuit ( p, memory, standard logic gates, etc. ) and advance computer technology, the various measuring instruments ( virtual instruments ) with the powerful function of pc are produced in different industrial and scientific research fields. as we all known, the traditional instruments are usually built with discrete components and small scale ics, the disadvantages are obvious in system design, debugging and maintenance

    隨著半導體技術與數字集成電路（微處理器、存貯器以及標準邏輯門電路等）技術的迅速發展，特別是隨著計算機技術的發展，在工業生產和科學技術研究的各行各業中，人們利用pc機的強大處理功能代替傳統儀器的某些部件，開發出各種測量儀器（虛擬儀器） ，傳統儀器的數字邏輯部分多是採用分立集成電路（ ic ）組成，分立ic愈多，給系統的電路設計、調試及維護帶來諸多不便。
分享友人
分享到 Line

分享到臉書