纖維微觀結構 的英文怎麼說

中文拼音 [xiānwéiwéiguānjiēgòu]
纖維微觀結構 英文
fiber microstructure
  • 纖 : 纖形容詞（細小） fine; minute
  • 維 : Ⅰ動詞1 （連接） tie up; hold together; link 2 （保持; 保全） maintain; safeguard; preserve; keep ...
  • 觀 : 觀名詞1. （道教的廟宇） taoist temple2. （姓氏） a surname
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 纖維 : fibre; staple; filamentary
  • 結構 : 1 （各組成部分的搭配形式） structure; composition; construction; formation; constitution; fabric;...
  1. Objective : to study the chordae and arachnoid granulations in the lumen of superior sagittal sinus and torcular herophili by endoscope and microscope

    摘要目的：通過內窺鏡及顯微鏡觀察成年人上矢狀竇、竇匯竇腔及其內的纖維索、蛛網膜顆粒結構的解剖學形態特徵。
  2. While the quality of ct images is too poor to reconstruct the geometry model of muscle, this paper presents a novel muscle model, both the biomechanical chrematistics of tendon and micro structure of muscle fibers are considered

    針對ct圖像無法精確重建肌肉的幾何模型的問題，在充分考慮肌腱的生物力學特性，又體現肌纖維的微觀解剖結構的基礎上，提出一種新型的肌肉建模方法。
  3. The texture can be systematically classified as the six types : the felt - like texture, the micro - fibrous cryptocrystalline texture, the micro - fibrous texture, the micro - leaf - like cryptocrystalline texture, the micro - leaf - like texture and the radiated fibrous texture

    通過對青海軟玉顯微結構的觀察與研究，按其主要礦物透閃石組分的表現形式，較為系統地劃分青海軟玉的主要結構類型為：毛氈狀結構、顯微纖維隱晶質結構、顯微纖維結構、顯微葉片狀隱晶質結構、顯微葉片狀結構以及放射狀纖維結構。
  4. Experimental results indicate that : the ae characters of single bundle, 2 - d woven and 3 - d braided c / sic composite are different because of their different structures, damage mechanisms and developing progress, which can be verified by micrographic examination on specimens " initial state and fractography

    實驗研究表明：單纖維束、二維編織和三維編織c sic復合材料由於結構形式不同，損傷機理和發展過程不同，表現出的聲發射參量的特性也不同；試件初始狀態和斷口的顯微觀察證實了該推斷。
  5. Film microstructure is investigated by scanning electronic microscopy ( sem ). the micrographs showed that glass fiber distributed in epoxy resin with good dispersity, and interweaved with each other homogeneously

    並利用掃描電子顯微鏡（ sem ）對基底材料進行了觀察，發現玻璃纖維能夠在環氧樹脂基體中形成均勻的分散，並交織成不規則的網狀結構。
  6. Methods : hyperosmotic pressure animal model was established by administering 3 % sodium chloride as drinking water to rats or increasing osmotic pressure of the culture medium. osmoregulation positions in the brain, reciprocal projection pathways between the medullary visceral zone ( mvz ) and supraoptic nucleus ( son ) or hypothalamic paraventricular nucleus ( pvn ), oscillation of intracellular calcium in cultured neurons and astrocytes were studied by means of anti - fos, glial fibrillary acidic protein ( gfap ), tyrosine hydroxylase ( th ) or vasopressin ( vp ) multiple imrnunohistochemical staining, immuno - electronic microscope, wga - hrp retrogradely tracing and cell culture methods. results : ( 1 ) fos positive neurons within the mvz, parabrachial nuclei, locus ceruleus, pvn, son, subfomical organ increased markedly

    方法：通過給予大鼠飲用3氯化鈉或提高培養基滲透壓濃度的方法復制高滲刺激模型，主要採用抗fos 、膠質原纖維酸性蛋白（ gfap ）和酪氨酸羥化酶（ th ） （或加壓素? vp ）免疫組織化學多重染色、免疫電鏡、 wga - hrp束路追蹤結合免疫組織化學多重染色、細胞培養等實驗方法，系統觀察了中樞參與滲透壓反射的調控部位、下丘腦視上核（ son ）神經元? ast超微結構的變化、延髓內臟帶（ mvz ）和son及下丘腦室旁核（ pvn ）之間往返投射通路和神經元的性質及其與ast的關系、培養神經元和ast內鈣波的變化。
  7. Levels of fasting blood glucose and 24h urinary microcontent of albumin 24 h malb were determined dynamically ; the serum glycosyl hemoglobin hba1c was determined after the last medication ; the ultrastructural changes of kidney were observed by transmission electron microscope ; the expressions of collagen, fibronctin, laminin ln, and the ecm metabolism influencing factors, including mmp2, tissue inhibitor of metalloproteinase timp2, transfer growth factor 1 tgf 1 in renal tissue were detected by immunohistological chemistry and image collecting analytical system

    動態檢測各組大鼠空腹血糖fbg 24h尿微量白蛋白24h malb ，末次給藥后測定大鼠血漿糖化血紅蛋白hba1c透射電鏡觀察各組大鼠腎臟超微結構改變，應用免疫組化技術及圖像採集分析系統測定各組大鼠腎臟組織中型膠原c纖維連接蛋白fn層粘連蛋白ln的表達，測定影響ecm代謝的基質金屬蛋白酶2 mmp2基質金屬蛋白酶抑制劑2 timp2及轉化生長因子1 tgf 1的表達。
  8. The degrees of crystallinity of pure ptfe under the different conditions of water cooling, air cooling and furnace - varying cooling were made comparison by xrd. the thermal stability of pure ptfe and solid lubricant was analyzed by dsc - tg ; the composition and valence state of elements in the surface of carbon fiber, solid lubricant before and after friction test and lubricant transfer film were characterized by xps ; the frictional property of solid lubricant was tested by pin and disk test rig. the frictional wear property of solid lubricant between embedded bearing sleeve and steel axle friction pair ring was tested by special simulate test machine, the hardness of solid lubricant was tested by pm ; the compression strength of solid lubricant was tested by material test machine

    用sem表徵原料微觀結構、摩擦表面及潤滑轉移膜表面形貌：用xrd進行原料物相分析，及比較水冷卻、空氣冷卻、隨爐冷卻三種工藝條件下的純聚四氟乙烯樹脂的結晶度；用dsc - tg分析純聚四氟乙烯樹脂及固體潤滑劑的熱穩定性；用xps表徵碳纖維表面、固體潤滑劑摩擦前後表面、潤滑轉移膜表面的元素組成、價態變化；用銷盤式摩擦磨損試驗機對固體潤滑劑進行摩擦性能測試；採用專用的臺架模擬試驗機對固體潤滑劑鑲嵌軸承套與鋼軸摩擦副間的摩擦磨損性能進行測定；用萊次偏光顯微鏡（ pm ）測試固體潤滑劑的硬度；用材料試驗機測試固體潤滑劑的抗壓強度等。
  9. The results indicate that hp can promote the toughness and strength of cement mortar and concrete, and with the increase in hp mixture, compressive strength increases more obviously than bend resistant strength does ; with the hydrosoluble hp fibre added, the microstructure of mortar or concrete will change, the space web structure will be formed, which consists of mixed hydrates and hp films. as a result, the performance of mortar and concrete, with high strength and few apertures, can be improved

    結果表明， hp對水泥砂漿和混凝土有顯著的增韌、增強作用，且隨著hp摻量的增加抗壓強度提高的幅度增大，抗折強度提高的幅度降低； hp水溶性高分子纖維的加入可改變混凝土的微觀結構形態，在混凝土或砂漿中形成了水化產物與hp膜交織的空間網狀結構，使漿體緻密，減小孔隙率，從而影響其整體性能。
  10. The progress in the research on the mechanical properties, mechanism of tribological wear, biological compatibility and microstructure of carbon fiber ( cf ) reinforced polyether - ether - ketone ( peek ) composite is reviewed in this paper

    摘要綜述了碳纖維增強聚醚醚酮（ peek ）復合材料在機械力學性能、摩擦磨損機理、生物相容性、微觀結構等方面的研究進展。
  11. From the wool micrascopic structure, the textile fiber and the slow change of yarn, united with the productipon practice, it analysed the chicken footprint of cash mere sweater

    摘要從羊毛的微觀結構、纖維和紗線的蠕變與松馳等幾個方面，結合多年來的生產實踐對羊絨衫表面雞爪花進行了分析和研究，找到了雞爪花產生的原因。
  12. The research studies how to melt - spin pvdf fibers and polarize the fibers. it is an object to choose the pvdf material, probe melt - spinning technology parameters ; and improve the spinning ability of pvdf. then the fiber was polarized and the effect of poling parameters on microstructure was studied

    本論文主要研究了利用熔融法紡制pvdf纖維，並對纖維進行了極化，目的是探索提高pvdf可紡性的途徑，確定最佳原料型號和工藝參數，制備出以pvdf為基本原料的纖維，將纖維進行極化，探索極化條件對pvdf纖維微觀結構的影響。
  13. The microcrystalline was same to the direction of electric field. the microcrystalline orientation of the film that was obtained by melting pvdf congealing in the effect of electric field changed along electric field obviously. comparing with the film congealing without electric field their crystalline plate become thick

    發現pvdf纖維在電場作用下微觀結構變化較大，極化后微晶取向發生較大變化，極化以後微晶變化為沿電場方向取向的厚片狀，熔融態的pvdf在電場作用下凝固時變化更明顯，與不加電場直接凝固的pvdf膜相比，在電場作用下幾乎所有的分子鏈都沿電場方向取向所以出現有序的片晶結構，而且結構緻密。
  14. The results showed that the in - situ formed tibi particles which had a size of about 50nm, exhibited a homogenous dispersion in the copper matrix. moreover, the interface between the nanoscale particles and the copper matrix was clean, and there was no certain location relationship. due to their reinforcement, the tensile strength and hardness of the in - situ cu - tib _ 2 nanocomposite significantly improved

    通過光學顯微鏡、 tem 、 xrd等對cu - tib2原位復合材料進行了金相組織、微結構分析，原位復合材料的鑄態金相組織中彌散分佈著團簇狀的tib2顆粒；形變態金相組織中tib2顆粒呈纖維狀排列； tem觀察表明：在基體內存在著尺寸約為50nm 、彌散分佈的tib2顆粒，且tib2顆粒與基體之間界面清晰，但由於tib2結構與銅晶體結構的差別較大， tib2顆粒與基體之間無固定的位向關系；納米tib對銅基體有良好的增強作用。
  15. The performance of the stainless steel fiber depended on its microstructure, and micro institutional framework was affected by the processing for fiber, such as drawing, heat treatment technology. fiber performance influenced the performance of the fibers " production directly. the research of this thesis, to improve technology of fiber preparing, raise stainless steel fiber performance and open up its application, would offer experimental data and theoretical foundation, and make ss fiber meet the demands of other fields

    不銀排岡纖維的性能取決于其微觀結構，而微觀組織結構又受纖維化過程中拉拔、熱處理工藝的影響，纖維性育殖接影響到纖維製品的性能，本論文的研究，可對改進纖維制備工藝，提高不鉀拜岡纖維性能，拓寬其應用領域，提供實驗數據和理論基礎，使不鉀練岡纖維滿足不同用途的需要。
  16. We tested the ambient temperature compressive strength, the ambient temperature bending strength, volume density and the porosity of the sintered composites. by means of the om, sem, and x - ray, we analyzed the composites micro - structure ; we studied the dispersion methods & the mechanism of damage of the fiber ; we also did research on the reinforced mechanism and the fabrication characteristics of the fcmc

    測試燒后試樣的常溫耐壓強度、常溫抗折強度、體積密度、氣孔率，並藉助于光學顯微鏡、掃描電鏡以及x射線衍射圖象對復合材料微觀結構進行了分析，探討了復合材料中纖維的分散方法、纖維的損傷機理、纖維增強al _ 2o _ 3復合材料的增強機理和及制備特性。
  17. Study on microstructure and mechanical functions of bn fiber with transmission electron microscope

    纖維微觀結構和力學性能的透射電鏡研究
  18. This paper analyses the problem of concrete cracking and leakage, and set up the model of the middle or low - strength steel slag anti - cracking and impermeable concrete ( acic ) on the base of the analysis. the four principles of water permeable resistance character, volume stability character, toughness and anti - chemical corroded character have been put forward for raw materials selection and durability design of acic, acic is designed by the theory of composite material and the theory of fiber - reinforced, and two series of acic, such as fly ash series and steel slag series, have been manufactured by means of mineral admixture, hybrid fiber and chemical admixture. hydrating heat, macro - mechanics quality, durability and microstructure of the acic have been researched

    本文對中低標號大體積混凝土滲透開裂問題進行了研究，從混凝土自身結構形成與經濟角度指出大摻量粉煤灰與膨脹劑復合配製大體積混凝土的問題所在，提出採用鋼渣微細礦粉配製中低標號防滲抗裂混凝土的思路，運用復合材料理論設計中低標號防滲抗裂混凝土，提出了低水化熱、抗滲性能、體積穩定性、韌性和抗沖磨性能是中低標號防滲抗裂混凝土材料選擇和耐久性設計的主要原則，採用鋼渣微細粉復合混雜纖維、化學外加劑的技術路線，配製了適合於深水等特殊環境中的大體積中低標號鋼渣系列防滲抗裂混凝土，對其進行水化特性、宏觀物理力學性能、耐久性和微觀結構研究。
  19. After designing poling equipments, fibers were polarized. the microstructure changes of the fibers were studied by means of dsc, ftir and sem. the results show that : the fiber was polarized in dimethyl silicone fluid, and the microstructure changed

    本課題還進行了pvdf纖維與膜的極化研究，自行設計了極化裝置，並對極化前後纖維利用靜電測量、紅外光譜和掃描電鏡等方法進行對比研究，揭示了pvdf在電場作用下微觀結構的變化情況。
  20. Abstract : a combined analysis of the wrinkle resistance of costume fabricsis made, taking wool fabric as an example. the effects of the fiber microstructure 、 fiber length and thinness on distortion - reversion properties are analyzed by quantitative analysis. this will for enrich the research contents of costume function system and elevating the theoretical value of the research

    文摘:提出服裝面料耐皺外觀的綜合分析，以毛織物為實例，用定量分析的方法，分析了構成織物的紗線中的纖維微觀結構及纖維長度、細度對織物變形回復性能的影響.這對于進一步豐富研究服裝功能體系的內容，提高研究的理論價值具有重要意義
分享友人
分享到 Line

分享到臉書