耐磨膠料 的英文怎麼說

中文拼音 [nàimójiāoliào]
耐磨膠料 英文
abrasion resistant compound
  • 耐 : 動詞（受得住; 禁得起） be able to bear or endure
  • 磨 : 磨動詞1 （摩擦） rub; wear 2 （研磨） grind; mull; polish 3 （折磨） grind down; wear down [out]:...
  • 膠 : Ⅰ名詞1 （某些具有黏性的物質） glue; gum 2 （橡膠） rubber 3 （姓氏） a surname Ⅱ動詞（用膠粘） st...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 耐磨 : abrasion resistant; anti friction; wear resistant; wear resisting; wearproof耐磨材料 high abrasiv...
  1. The research results show that, from the viewpoint of second phase morphologies, there exist quite differences between the grain - type materials ( such as wc / bcu brazing deposit material, wrs1000 and 1zt tungsten carbide strengthening overlaying material, as well as the wear - resistant material of polymer adhesive coating etc. ), and the aggregation - type as well as dispersion - type ones ( such as zg35simn, wrd - 1 and khc - k2 depositing material ) in the wear - resistance and sand slurry abrasion mechanism. the sand slurry abrasion mechanisms are brought forward, of new wear - resistant materials with the features of grain - type second phase morphologies

    研究發現，與聚合型、彌散型第二相的材料（如zg35simn 、 wrd ? 1和khc ? k2熔敷材料等）相比，顆粒型第二相的材料（如wc bcu釬焊熔敷耐磨材料、 wrs1000型耐磨材料、 1zt碳化鎢顆粒增強熔敷材料及ktc ? 1耐磨膠粘塗層材料等）在耐磨性能和磨損機理等方面均有不同，總結提出了以「顆粒型第二相」為特徵的耐磨新材料泥沙磨損機理。
  2. Unique design of upper ; toecap design sole is wear - resistant and skidproof. imported eva material as middle sole is wear - resistant and flexible

    橡膠大底設計獨特新穎，鞋頭採用包頭設計，整雙底臺耐磨止滑。中底eva採用進口材料製作，耐磨性及韌性優異。
  3. Wear - resistant and crinkle - resistant high quality buffalo combined with suede as upper. rubber toecap ensures its wearability and unyielding, more protective

    採用牛皮與反毛皮的結合，鞋面耐磨，防皺。鞋頭部分採用橡膠材料，耐磨且不易變型，具有保護作用。
  4. Dalian kerui economics trade co., ltd. sell tapes for bonding in industry, reclosable fasteners, adhesives, polish and grind material, anti - electrostatic and insulation tape america 3m company, heat shrinkable tubing, wire and cable, electrical thermal wire and system america raychem company, masterbatch hanna - wilson, silicone products ge toshiba company and electrostatic electronic hydrotreater, water tank self - cleaning sterilizer beijing enfi company

    公司經銷美國3m各種工業用單雙面膠帶尼搭扣粘接劑拋光研磨材料防靜電材料絕緣膠帶美國瑞侃公司單雙層熱縮管鉸鏈薄壁耐高溫導線電伴熱線及系統漢納威爾遜色母料ge東芝有機硅產品和各種靜電水處理器水箱自潔消毒器。
  5. Palm material : carbon interspersed foam with main focus on excellent durability and grip. 15 % latex extension. increased grip zone

    手掌部分採用碳化泡沫為主要材料，經久耐磨，捕捉固定力強。外延有15 %的乳膠。
  6. An excellent adhesive was prepared from bismaleimide ( bmi ), epoxy resin ( e - 51 and tde - 85 ), 4, 4 ' - diaminodiphenyl sulfone ( dds ) in this thesis. the influence of liquid rubber and polymer ether imide ( pei ) on the properties ( especially high - temperature strength and the peeling strength ) were discussed, their different toughening characteristics and mechanisms were discussed. last, the process and effection of heat - resisted structural adhesive were studied by adhesive experiment of synchronizer in automobile. the results of investigation made clear : the adhesive, has good properties, especially heat - resisted properity

    根據材料分子設計的原理，研究了二苯甲烷雙馬來酰亞胺（ bmi ） 4 ， 4 』 ?二胺基二苯基碸（ dds ） e ? 51 tde ? 85組成的環氧膠粘劑體系，研究該體系在作為高溫結構膠粘劑使用時的粘接性能；然後研究了用無規羧基液體丁腈橡膠（ ctbn ? x ）和聚醚酰亞胺（ pei ）分別來增韌該體系的增韌效果；最後通過碳纖維耐磨材料與同步器圓錐環的粘接實驗，研究了耐高溫結構膠粘劑的粘接工藝和使用效果。
  7. Some of sizing properties of this mixtured size with guar gum show similar to that of currently used mixtured size, but guar gum features a high viscosity which makes a poor wear - resistance of the sizing yarn

    這種加入瓜爾膠的混合漿料的某些性能與現行混合漿料的漿紗性能相似，但瓜爾膠黏度較大，上漿紗耐磨性較差。
  8. Compared with cotton, vinylon has stronger tenacity and elongation, better abrasive resistance, stronger hygroscopicity, and better heat preservation, and it has better resistance to chemical corrosion, sunlight, moth, mold, and radiation as well. vinylon can be spun with cotton or other fibers into knitting goods and other cloth. it is also used as industrial fiber for the manufacture of tire cord, conveyer, fire hose, fish net, ropes, canvas, filter cloth, and rubber items etc

    維尼綸是以聚乙烯醇為原料紡成的合成纖維，其性能與棉花相似，與棉花相比又有強伸度大耐磨性好吸濕性強的優點和更好的耐化學腐蝕性耐曬性耐蛀霉性保暖性及耐輻射性等，可與棉花及其它纖維混紡以織造針織物及其它用布，同時作為工業用纖維，廣泛用於製造輪胎簾子線運輸帶水帶魚網繩索帆布過濾布及橡膠製品等。
  9. Silicone rubber cable is a kind of abrasionproof cable which used rubber as material that similar to rubber sheath cable, but its performance is better than rubber sheath cable, especially its anticorrosive performance

    硅橡膠電纜是繼橡套電纜后又一使用橡膠材料作為絕緣護套的耐磨型電纜，但同時其性能又勝出橡套電纜，特別是其耐腐蝕性能，遠遠超過了橡套材料。
  10. Screeds, bases and in situ floorings - mastic asphalt underlays and wearing surfaces - code of practice

    找平層底基和現場鋪築地板材料.瀝青砂膠底層和耐磨層.實用規程
  11. Thermal - plastic rubber of pu material + rubber desilt strips are adopted as the surface material, which are featured by non - skid, resistance to wear, and dust removal etc., and thus could ensure clean indoor environment, and reduce the wear rate of marbles

    面料採用熱塑性橡膠pu材質+橡膠除泥條結合具有防滑、耐磨、除塵等性能，從而保證了室內環境清潔和減少大理石的磨損率。
  12. Based on the technical requirements of manufacture, application and repair of the pump shell and cutter piece of the cutterhead pipeline dredge, put forward are the re - manufacture three principles on easily damaged workpieces of dredge engineering. with the inter - clamped structures on the pump liners, the gradient wear - resisting design on the cutter piece, and the new techniques in the process of re - manufacture, new wear - resistant materials, including high - cr alloy, overlaying and brazing deposits, and polymer adhesive coatings have been successfully applied to the re - manufacture dredge pump shell and cutter piece. the application results show that their wear - resistant lifetimes and the dredging profits have been increased remarkably

    根據絞吸挖泥船泥泵絞刀的製造、使用和修復性能要求，提出了疏浚工程易損件再製造三原則；採用泥泵內襯互鎖結構、絞刀梯度化耐磨設計和工藝再製造新技術，將高鉻合金耐磨材料、熔敷耐磨材料及其復合材料和高分子耐磨膠粘塗層材料成功地應用於再製造泥泵殼和絞刀片上，顯著提高了泥泵殼和絞刀的耐磨壽命和挖泥船的疏浚效益。
  13. Design and application of wear resistant rubber liner used for chute, bunker and hopper

    料斗用耐磨橡膠襯里的設計與應用
  14. Although the rigidity is 45hrc, toolox44 is easy to process, especially suitable for manufacturing plastic moulds with the help of its good polishing and etching performance. the other applications include rubber mould, forming mould, machine parts, and wearable parts

    盡管硬度? 45hrc toolox44很容易加工，特別適合製造塑料模具，因?它的拋光和蝕刻效果很好。其他應用領域包括：橡膠模具成型工具機器部件耐磨部件。
  15. Wear - resistant and cinkle - resistant nubuck as upper. mesh is breathable, lightweight, ripstop and wear - resistant. rubber toecap is wear - resistant, unyielding and protective. laser carved design on upper

    採用優質牛皮，耐磨，防皺。鞋面網布採用透氣性好，輕量化、抗撕裂、耐磨材料。鞋頭部分採用橡膠材料，耐磨且不易變型，具有保護作用。鞋身採用激光雕刻工藝。
  16. Samll grinding products, the steel ring in the middle of the grinding dish is used to fix into the hand grinding machine. it is easy to be used and have long life time by using high toughness fiber and fine grit which combined by special bond

    本品屬小型研磨材料，研磨碟中心的鐵環造成用於手磨機的裝置，此研磨碟有著與其他研磨的位置而用手磨，有著靈活轉動、耐用等點，採用高韌度纖維和精選礦砂再經由特製粘膠復合而成，該產品用於清除金屬刺和磨圓邊角，研磨不銹鋼特別砂紋，絕對不會燒黑工件表面，不會改變工件尺寸。
  17. Rubber - or plastics - coated fabrics - determination of abrasion resistance - taber abrader

    塗橡膠或塑料的織物.耐磨性的測定. taber磨蝕機
  18. When change the component of adhesive its shear strength increased from 39. 3 mpa to 53. 5 mpa at room temperature and it have long - term usage at 180 with 25 mpa and can be served at 230 in short period. the addition of liquid rubber resulted in a 300 % increase in the peeling strength. the addition of polymer ether imide led to a 260 % increase in the peeling strength, a 15 % increase in shear strength and a 10 increase in tg ( tg = 195. 54 )

    研究結果表明： bmi dds e ? 51 tde ? 85組成的膠粘劑體系的室溫剪切強度為39 . 3mpa ，當改變環氧樹脂的含量時，剪切強度提高到53 . 5mpa ；用無規羧基液體丁腈橡膠改性環氧樹脂膠粘劑時室溫剝離強度提高3 . 0倍；用聚醚酰亞胺改性環氧樹脂膠粘劑，室溫剪切強度最高可達45 . 2mpa ，剝離強度提高2 . 6倍，玻璃化轉變溫度tg = 195 . 54 ，比未增韌體系提高10以上；碳纖維耐磨材料與同步器圓錐環的粘接實驗結果表明，膠粘劑的使用工藝性能良好，滿足室溫剪切強度30mpa和180剪切強度12 . 5mpa的技術要求。
  19. Nylon is one of the best quality snthetic fibers the rubber in dustry use nowadays. the nylon canvas is woven by nylon fibers both in warp and in weft, it is the most widely used fabric in rubb - er industry, and its outstanding merits are its high abrasion resistance. high fensile strength and good fatigue resistance. connvyor belts with nylon canvas inside have the characteristics of thin belt body, high tensile strength, good shock resistance, good troughability, high adhesion between pli - es, splendid flexibility and long working life. nylon conveyor belts are suitable for medium, long - di - stance and heavy - load transportation of materials, widely used in mining, metallurgical industry and architectural industry, ports and etc

    產品說明:尼龍是橡膠工業目前所用合成纖維中性能最好的品種之一，其結構經緯向均為錦綸纖維編織，用途最廣的品種，它最突出的優點是耐磨性好，強度高，耐疲勞性好，尼龍帆布做成輸送帶具有帶體薄，強力高，耐沖擊，成槽性好，層間粘合力大，屈撓性優異及使用壽命長等特點，適用於中長距離，較高載量，高速條件下輸送物料，廣泛用於礦山，冶金、建築、港口等部門。
  20. With the induction depositing process especially, as well as the overlaying deposit and the adhesive coating process for wear resistance, in consideration of the material manufacture and application, some types of new wear - resistant materials, including metallic materials, their composites and polymers are designed and developed. the research results on wear - resistant properties, microstructures and worn morphologies show that these materials possess their own characteristics, present the excellent and synthetic properties

    特別運用感應熔覆法以及堆焊覆層法和耐磨膠粘塗層方法，並從材料的加工應用考慮，設計研製了多種類型的金屬及其復合材料和高分子等耐磨新材料，對這些材料的耐磨性能、微觀組織和磨損形貌的研究表明，它們各具特色，具有優異的綜合性能。
分享友人
分享到 Line

分享到臉書