腹緣 的英文怎麼說

中文拼音 [fùyuán]
腹緣 英文
ventral margin
  • 腹 : 名詞1 （軀乾的一部分） abdomen; belly; stomach 2 （鼎、瓶子等器物的中空而凸出處） empty and protr...
  • 緣 : Ⅰ名詞1 （緣故） reason 2 （緣分） predestined relationship 3 （邊） edge; fringe; brink Ⅱ動詞（攀...
  1. The web and flanges of the main girders were fabricated from astm a441 steel.

    主梁的腹板和翼緣用ASTMA441鋼製造。
  2. Small rectangular backup bars were used to fabricate the web-bottom flange connection.

    在腹板與下翼緣的施焊中使用小矩形擋板。
  3. It is the key of ebfs, therefore, furthermore calculation about link are carried out in this thesis, introduced achieved research, summarized the affect of link on whole capability in the first, the second, numerical calculation are proceeded on link with ansys : with the purpose of discussing yielding mode critical length of link, established five different specimens ; with the purpose of discussing the influence of h / tw of web, b / tf of flange and h / b, established eighteen different specimens ; with the purpose of discussing the affect of stiffener, established four different specimens, and elaborated the affect of stiffener on link based on achieved test researches

    因此，本文對耗能梁段進行進一步計算分析，概述耗能梁段對整體性能的影響，並利用有限元程序ansys對耗能梁段進行數值計算：針對耗能梁段的屈服類型建立5種不同長度的模型，計算討論耗能梁段屈服類型的長度劃分；針對耗能梁段腹板高厚比、翼緣寬厚比以及梁段截面形狀等因素共建立了18種模型進行計算分析；針對加勁肋對耗能梁段的作用建立了4種模型，並結合已有的試驗闡述了加勁肋對耗能梁段的影響。
  4. In addition to, the fatigue crack between web and upper flange of welded steel crane beam on heavy duty service was discussed, and based on long - term observation and research, the author classified fatigue crack into bearing type and middle type crack along the horizontal direction. the causation, distributive law and mechanism of the crack were analyzed, and the precautions to take and the measures to remedy crack were presented. the main defacts including damage, crack, erosion and aging in structures, especially in concrete structure were introduced ; the defact mechanism was analyzed and the precautions to take were also given

    另外，作者對重級工作制焊接鋼吊車梁腹板與上翼緣連接焊縫的縱向水平疲勞裂縫進行了長期的觀察和研究，根據疲勞裂縫產生的不同機理，將其分為支點裂縫和肋間裂縫，並討論了兩類裂縫產生的原因、分佈規律、機理以及防治的措施；對工程中經常遇到的結構構件，尤其混凝土構件的幾種主要病害（損傷、裂縫、腐蝕與老化）進行了機理分析並提出了防治措施。
  5. Fundamental of laser 40ar / 39ar dating method : our laboratory has successfully set up the laser microprobe 40ar / 39ar geological dating method. our works include adjustment of the high - gain electron multiplier in mass spectrometer and correction of mass discrimination, adjustment of the laser, test for absorption ability of minerals to laser, designing and manufacturing high - vacuum sample chamber, sample preparation and irradiation, research on the variability of j values on the surface of rock chips, measuring atmospheric argon, determination and correction of blanks and ages, etc. the laser microprobe technique is particularly effective for some geological samples. it can be used, for example, for research of distribution of the components in extremely small samples that are very difficult to be separated and purified and those which contain excess argon

    本文首先從常規~ （ 40 ） ar ~ （ 39 ） ar階段升溫定年實驗室的改進入手，進而建立了激光~ （ 40 ） ar ~ （ 39 ） ar定年實驗室，利用這兩種先進同位素地質定年方法，結合其他手段，對青藏高原腹地和北緣的阿爾金斷裂系多期地質事件進行了詳細的同位素年代學研究：一、參照國際先進實驗室的流程，對我們的常規~ （ 40 ） ar ~ （ 39 ） ar階段升溫實驗室在樣品的預處理、樣品的照射條件和系統空白測量及校正等方面進行了改進，使之產出的同位素年代數據更可靠並為國際同行所承認。
  6. Both flange and web exhibited satisfactory elongation characteristics (i. e. 28%).

    翼緣和腹板都有令人滿意的延伸率（即28）。
  7. The slab has provided greater fixity to the top flange, and the adjacent web gap has experienced greater deformation and has cracked first.

    橋石板為上翼緣提供了很大的固結度，於是相鄰的腹板間隙就經受了較大的變形並且首先開裂。
  8. Cracks have been found in the flange and web splices at groove welds in at least four bridges.

    至少在四座橋梁的翼緣板和腹板拼接坡口焊縫中發現了裂紋。
  9. Furthermore, in order to predict the force at beam tension flange when end - plate yields, kulak method, applied to determine the ultimate strength of the t - stub connections, are modified by introducing a parameter c. the general solution of parameter c is also provided in this paper

    在有限元計算的基礎上，本文分析了影響節點強度的主要因素，包括： （ 1 ）螺栓和端板的強度； （ 2 ）柱翼緣的抗壓強度； （ 3 ）柱腹板的抗壓強度。
  10. On the basis of this, the paper makes a great deal of calculation and analysis in this part, different parameters " effect and stress gradient are included. local buckling coefficient and the efficient width calculated formula are provided and look forward to take a reference to the redaction of the specification

    本文對此內容進行了較為深入的研究，考慮了多個參數的影響，對各種應力比作用下的楔形腹板的屈曲及屈曲后強度進行了計算分析，得出了考慮翼緣相關作用的楔形腹板屈曲系數及有效寬度系數的計算公式，以期為規范的修訂提供參考。
  11. At the top flange there would be enough slack so that no relative twist of any significant magnitude would be introduced into the girder web.

    在上翼緣處有足夠的松動，因而在主梁腹板上並不會引起很大的相對扭轉。
  12. The mechanism of memory and learning in the mrd performed by dopamine and its receptors was discussed. methods and results the immunohistochemistry method was used to investigate the distribution of dopamine and tryosine hydroxylase immunoreactivity in the marginal division of rat striatum using da and th polyclone antibody

    但在紋狀體邊緣區中的da和th免疫陽性纖維較多，呈密集的帶狀分佈，且有蝌蚪狀終末，沿背腹方向走行，未見胞體。
  13. The little blue organisms lined up along the brush border of the small intestinal epithelium are cryptosporidia. this infection causes diarrhea in immunocompromised hosts

    沿著小腸上皮刷狀邊緣排列的呈藍色的病原體是隱孢子蟲。隱孢子蟲感染使免疫缺陷病人腹瀉。
  14. Based on the research of influenced parameters on constant and varying depth solid web box girder before, the shear lag aroused by the parameters including width - span ratio, outstanding flange on base slab and the position of the tendons are further studied. the investigation show that shear lag values diminish along with the decease of width - span ratio and the departure from the symmetrical axis of anchor position, but outstanding flange is contrary to the former

    在前人對等截面、變截面實腹箱梁剪力滯效應影響參數研究的基礎上，本文進一步對腹板開孔的連續箱梁的寬跨比、底板翼緣伸出以及預應力錨固位置改變等參數對箱梁剪力滯的影響進行研究。
  15. Then an thorough computer modeling using finite element program with material, geometry and state triple - nonlinear taken into account is carried out on a series of influencing factors, such as comparison with npn - beam splice connection, comparison of varies designed theories, and the varying of fraction coefficient, diameter, grade, pretension and arrangement of bolts, thickness of web and flanges of beam and column, splicing location, axial loading on column, etc. lots of useful conclusions are drawn form computer modelling. finally, design and construction suggestions are given out. this study fills the black in the field of steel beam - to - column connection with cantilever beam high - strength bolted - splicing at both home and abroad

    然後，本文在考慮材料、幾何和狀態三重非線性的基礎上，對該連接形式進行了全面的計算機模擬，主要考慮了帶懸臂梁段全螺栓拼接的樑柱連接節點與無拼接的樑柱連接及翼緣對接焊接腹板拼接的連接節點的對比，各種設計方法之間的對比，以及翼緣拼接和腹板拼接的螺栓間距、直徑和數量，拼接點與梁端之間的距離，梁和柱的翼緣、腹板厚度，柱的軸力，接觸面的摩擦系數，翼緣和腹板拼接板的厚度等因素的影響。
  16. Operation : performer put the thumbs with strength on “ yin tang ” between eyebrows to rub separatedly for both sides along with upside of eyebrows to “ zan zhu ” “ si zhu kong ” “ tong zi liao ” directly to “ tai yang ” repeatedly for six to thirty six times

    手大拇指指腹著力，從受術者兩眉弓間「印堂」穴開始，沿眉弓上緣分別向外揉「攢竹」 「絲竹空」 「 ?子? 」穴，直到「太陽」穴止，反復六至三十六次。
  17. Yibin lies in southern of sichuan basic, the first city along changjiang river ten thousand lies cruise. it is the converge spot of jinsha, min and changjiang river. it is an ancient city, over 2000 years history, the famous liquor production capital, over 3000years making spirits history, the hometown of the world - famous wuliangye

    宜賓市位於四川盆地南緣，川、滇、黔三省結合部，處于大西南的腹心地帶，金沙江、岷江、長江匯合處，是長江經濟帶西端的支撐點，是國家16個重點開發區之一? ? 「攀西? ?六盤水地區」的重要組成部分。
  18. For there are eunuchs who were born so from their mother ' s womb, and there are eunuchs who were made eunuchs by men, and there are eunuchs who made themselves eunuchs because of the kingdom of the heavens

    12因為有的閹人從母腹生來就是這樣，也有的閹人是被人閹的，並有的閹人是為諸天之國的緣故自閹的。
  19. Mt. 19 : 12 for there are eunuchs who were born so from their mother ' s womb, and there are eunuchs who were made eunuchs by men, and there are eunuchs who made themselves eunuchs because of the kingdom of the heavens

    太十九12因為有的閹人從母腹生來就是這樣，也有的閹人是被人閹的，並有的閹人是為諸天之國的緣故自閹的。
  20. This paper applies nonlinear finite element program bsnfem to analyze the behaviors of eccentrically braced steel frames under cyclic load. the study that comprehensive and systematic analyze the factor of links length, thickness of links flange, distance of links rib, thickness of links rib and angle of brace to be changed affect energy - dissipation capacity of d shape and k shape eccentrically braced steel frames have been some studied before. this paper fills the black in the filed factor of high - span ratio, brace stiffness and brace - to - beam connections to be changed affect energy - dissipation capacity of d shape and k shape eccentrically braced steel trames and any factor to be changed affect energy - dissipation capacity of y shape eccentrically braced steel frames

    對耗能梁段的長度、耗能梁段腹板的厚度、耗能梁段翼緣的厚度、耗能梁段加勁肋的間距、耗能梁段加勁肋的厚度、支撐的夾角等因素的改變對d形、 k形偏心支撐鋼框架耗能的影響，前人已有一些研究，本文對這些因素的影響進行了全面系統的分析，完善了理論分析的不足；而結構高跨比、支撐剛度、支撐與梁的連接形式等因素對d形、 k形偏心支撐鋼框架破壞機理的研究以及各種因素對y形偏心支撐鋼框架破壞機理的影響，則很少有人涉及，本文對此也進行了深入系統的分析，填補了這一研究空白。
分享友人
分享到 Line

分享到臉書