膠結樹脂 的英文怎麼說

中文拼音 [jiāojiēshùzhī]
膠結樹脂 英文
bonding resin
  • 膠 : Ⅰ名詞1 （某些具有黏性的物質） glue; gum 2 （橡膠） rubber 3 （姓氏） a surname Ⅱ動詞（用膠粘） st...
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 樹 : Ⅰ名詞1 （木本植物的通稱） tree 2 （姓氏） a surname Ⅱ動詞1 （種植; 栽培） plant; cultivate 2 （樹...
  • 脂 : 名詞1. （動植物所含的油質） fat; grease; tallow 2. （胭脂） rouge 3. （姓氏） a surname
  • 樹脂 : resin; jaffaite; peucine
  1. Study on the preparation and relationship between micro - structure and mechanical properties of epoxy / rubber / clay composites epoxy / rubber / clay composite has been prepared by the melted intercalation of octadyl ammonium exchanged montmorillonite ( c18 ) with dgeba and carboxyl - terminated butadiene - acrylonitrile random copolymers ( ctbn ), and piperidine as the curing agent

    環氧樹脂橡膠粘土三元復合材料採用熔融共混法制備了環氧樹脂橡膠粘土三元復合材料，就ctbn 、 c18含量、加料順序和固化工藝等制備工藝對c18在三元復合材料結構以及材料的力學性能的影響進行了研究。
  2. Used for producing polyester resin, polyimide resin, water soluble, alkyd resin, water soluble polyurethane resin, plasticizer, water soluble amino - alkyd resin, curing agent for epoxy resin, aeroengine oil, electric capacitor maceration oil, binder, sizing agent, smoke suppressor, instant binder, etc.

    ：用於製造聚酯樹脂及聚酰亞胺樹脂水溶性聚脂樹脂水溶性聚氨酯樹脂增塑劑和水溶性氨基醇酸樹脂環氧樹脂固化劑以及高級航空潤滑油電力電溶器浸漬油粒料粘結劑施膠劑消煙劑瞬時粘結劑等
  3. Performance for a piezoresistive transducer pressure sensor to thermal and pressure environments can be predicted by finite element method. a simplified 1 / 8 model, considering silicon dioxide and nitride process as well as stack anodic bonding and adhesive bonding processes, was developed. the fem results were found to be comparable to experimental data. case studies suggested that pyrex stack induces certain amount of non - linearity, while it isolates hard epoxy nonlinear effect. flexible epoxy bonding or soft adhesive bonding is preferred to the packaging process. the viscoelasticity and viscoplasticity of bonding material will result in hysteresis and drift errors to sensor output. however, soft adhesive s influence on sensor can be ignored under relative stable environments. more over, detailed design and process information will help to improve modeling application

    熱、壓環境下壓阻變換壓力傳感器的性能可以通過有限元方法預測.這里研究了簡化的1 / 8模型，模型考慮了二氧化硅和氮化硅生成過程及堆陽極鍵合和膠粘結合過程.結果發現有限元預測結果和實驗數據具有可比性.範例研究表明，硼硅堆導致產生一定的非線性，但它隔離了硬環氧樹脂的非線性.在包裝過程中最好使用柔性環氧黏合或軟黏膠性結合.黏合材料的黏彈性和黏塑性將會導致傳感器輸出的滯后和漂移誤差.然而，在相對穩定的環境下，軟黏合劑對傳感器的影響可以忽略.此外，詳細的設計和過程信息有助於提高模型的適用性
  4. The experimental results indicated that the tea waste powder as an additive to uf resin could reduce its free formaldehyde content and reduce the formaldehyde emission of uf resin bonded plywood ; the tea waste powder with much less size was easily mixed with uf resin and acted much more effective ; the tea waste as an additive to uf resin in a proper amount did nut decrease the bond strength of plywood

    實驗結果表明，茶葉廢料作為填料添加到脲醛樹脂膠黏劑中，能夠降低其游離甲醛含量以及其黏接膠合板的甲醛釋放量；茶葉廢料顆粒度越小，與脲醛樹脂混合性越好，消除甲醛效果越顯著；茶葉廢料的適量加入不會降低膠合板膠合強度。
  5. Recently, an advanced composite material named carbon fiber reinforced plastic ( cfrp ) has emerged as an alternative to traditional strengthening materials. many advantages such as lightweight, non - corrosive, simple construction, and high tensile strength make it widely used in strengthening field

    碳纖維布（ cfrp ）加固修補混凝土結構技術是一項新興的結構加固技術，它是利用樹脂類膠結材料將碳纖維材料粘貼于混凝土表面，從而達到對結構構件補強加固及改善結構受力性能的目的。
  6. It also discuss the composition, structure, properties and the requirement to application of dry - mica tape and introduces the development of impregnating resin / dry mica tape insulation system for vpi to high - voltage electric machine in china and overseas

    闡述了少膠粉雲母帶的組成結構和性能以及應用要求。概述了國內外高電壓電機用少膠vpi浸漬樹脂和少膠粉雲母帶的發展狀況。
  7. The test contains compatibility, electrical aging and dielectrical properties of the new type major insulation manufactured with h9110 impregnating resin and 9547 - 1 single glass cloth reinforced dry mica tape. it also contains the tests have been applied in three electric machine factories

    試驗內容包括由h9110浸漬樹脂與9547 - 1少膠帶構成的新型少膠vpi主絕緣結構的相容性試驗、室溫點老化和熱電老化評定試驗以及三個電機生產廠家的應用試驗。
  8. Its research contains the preparation and technical index of application of h9110 solventless impregnating resin of the ansatured polyester - imede. it analyses reactivity of the resin by dsc and provides the research process of 9547 - 1 single glass cloth reinforced dry mica tape and the alteration of mica tape michines. it also characterizes the structure of h9110 solventless impregnating resin and the resin to dry mica tape by infared spectroscopy and nuclear magnetic resonance hydrogen spectroscopy

    研究內容包括h9110不飽和聚酯亞胺無溶劑浸漬樹脂的制備及使用工業參數的確定，用dsc分析了該樹脂的反應活性； 9547 - 1單面玻璃布補強少膠粉雲母帶的研製過程和雲母帶製造設備的改進；用紅外光譜和核磁共振分析表徵了h9110不飽和聚酯亞胺無溶劑浸漬樹脂和少膠粉雲母帶粘合樹脂的結構。
  9. The size distribution of composite latex particles is similar to that of polyacrylate / caco3 latex. their mean particle diameters gradually decrease with amount of polyacrylate / caco3 latex and caco3 / monomers increasing, but the mean particle diameters of the composite latex are much bigger than particle diameters of caco3 latex. molecular weight of pvc composite resin was determined by viscometer

    結果表明：復合膠乳呈現與種子粒徑相近的單峰分佈，其平均粒徑隨聚丙烯酸酯caco _ 3種子膠乳中caco _ 3加入量的增加而逐漸減小，但復合乳膠粒徑比種子粒徑要大很多；用粘度法測定了復合樹脂中pvc的粘均分子量。
  10. The tlow distance and gelating time of the nanocomposites were shorter than that of the pure pf, which meet the standard of the pf used in frictional materials. compared to the pure pf, the silica7pf nanocomposites exhibited excellent heat stability only in nitrogen atmosphere, however, so do vermiculite / pf nanocomposites in both nitrogen and air atmospheres. compared to the brake pad based pf resin, the wear rate of the present one based with silica / pf nanocomposite decreased obviously, especially in high temperature

    用烷基銨ctab和kh - 560對蛭石進行有機化處理，通過原位聚合法制備了酚醛樹脂接枝改性sio _ 2納米復合材料、酚醛樹脂kh - 560改性sio _ 2納米復合材料、酚醛樹脂ctab改性蛭石納米復合材料、酚醛樹脂/ kh . 560改性蛭石納米復合材料，採用ftir 、 xrd 、 afm和tg分析與流動距離、凝膠化時間的測試，研究了所制備的酚醛樹酯納米復合材料的結構、固化行為和熱穩定性能，並研究了以酚醛樹酯納米復合材料為基體的剎車片摩擦磨損性能。
  11. As the content of vermiculite minerals increased, the content of the " intercalated " shape, in which crystal gallery breadth was about of 40nm, also increased. in the curing reaction processing of polybenzoxazine / vermiculite hybrid nanocomposites intercalated with bisphenol a type precursor. according to the content of vermiculite minerals, while different shape of crystal was forming, these crystals were retarding the heat ring - opening polymerization of bisphenol a type precursors in the nanocomposites

    通過對雙酚a型ben蛭石納米插層物固化過程的分析：不同蛭石含量的插層物，在形成不同納米分散狀態固化結構的過程中，蛭石晶片對雙酚a型ben的熱開環聚合有明顯不同的阻礙作用，蛭石含量為3的插層物160的凝膠化時間較純樹脂的延長約7min ，活化能高約8kj mol ，固化反應熱晗低約14j g ，使得固化物的固化程度較純樹脂低約10 ，阻礙作用最大，其它含量的次之。
  12. Many kinds of chromatograph including silica gel, d101 resin, sephadex l - 20 gel, rp - 8 and hplc are used in extracting and separating chemical constituents form these plants. certainly, they need to select the best eluate by tlc. some technique including ms ( ei - ms, fab - ms ), id and 2d nmr ( cosy, roesy, hmbc, hmqc ) been used in identifying these chemical structures

    通過各種硅膠柱層析，吸附樹脂， sephadex系列凝膠樹脂以及rp - 8類反向柱等層析材料以及高效液相色譜等技術，利用不同的洗脫體系對這兩種植物的化學成分進行分離得到純的單體化合物，然後利用ms （ ei - ms ， fab - ms ） 、一維nmr 、二維nmr （ cosy ， roesy ， hmbc ， hmqc ）等技術對這些化合物進行結構鑒定，利用ir和uv對這些化合物進行了表徵。
  13. The main results are summarized as follows : first, formulation tailoring and curing process of epoxy resin adhesive have been studied, and the peel strengths were tested. the curing temperatures are obtained following the result of curing reaction heat flow tested by dsc

    主要研究內容和結果如下:首先，研究了作為基底材料基體的環氧樹脂膠粘劑的配方，利用差示掃描量熱儀（ dsc ）確定了膠粘劑的固化溫度，並對膠粘劑進行了性能測試。
  14. Cbb88 are non - inductively wound with electrode of double - layer metallized polyester film and dielectric of polypropylene. wrapped with polyester tape and sealed with wpoxy resin, usetinned copper leads

    Cbb20為無感結構，用聚丙稀膜作為電介質和鋁箔作為電極繞制而成，導線採用鍍錫銅線，外層用聚酯膠帶包裹，兩端使用環氧樹脂密封。
  15. Any food may contain, in any proportion not exceeding 5 parts per million, formaldehyde derived from any wet strength wrapping containing any resin based on formaldehyde or from any plastic food container or utensil manufactured from any resin of which formaldehyde is a condensing component

    ，而該甲醛是來自含有以甲醛為基的樹脂的防濕包裹物或來自採用甲醛為凝結成分的樹脂所制的塑膠食物容器或器皿
  16. Abstract : this paper introduces a new class f epoxy glass - cloth laminate. the synthesis of a epoxy adhesive and the production process were studied. the properties of the laminate were compared with those of some similar products abroad. the results show that the laminate has higher adhesive strength 、 resistivity in moist conditions 、 dielectric strength and mechanical strength in higher temperatures. it is applicable for electric equipments, especially those to run in higher moisture or higher temperature conditions

    文摘:本文介紹了最近開發成功的一種新型f級耐高溫層壓板，研究了環氧樹脂膠粘劑的合成，層壓板的製造工藝及其性能，並與國外同類產品進行了對比，結果表明，它具有粘接強度、浸水后絕緣電阻及耐電壓、高溫機械強度高等特性，可用作大型高壓電機、輸變電設備以及核電工程、低溫高真空工程中絕緣結構材料，尤其適用於高電壓、高溫、高機械強度的工作環境。
  17. The results show that the gel time of the resol prepared in this paper is much longer than that of resol catalyzed with normal alkali such as ammonia and it is more stable when temperature is under 160 ; while temperature exceeds 160, it cures very fast

    結果表明，合成的酚醛樹脂中有大量醚鍵，常溫下它的凝膠時間很長，固化速度慢，溫度大於160后，醚鍵分解產生甲醛，促進固化，凝膠時間迅速減小，固化很快。
  18. The type to current transformer is epoxy and silicone rubber insulation. it is fully enclosed and posttype. the terminal of the secondary is sealed tight. the silicone rubber outer cover has excellent ability to anti ? pollution

    本型電流互感器採用環氧樹脂和硅橡膠復合絕緣的全封閉支柱式結構，二次出線端封閉嚴密，尤其是硅橡膠外套，防污性能優異。
  19. Specification for insulating materials based on mica - specifications for individual materials - polyester film mica paper with an epoxy resin binder for single conductor taping

    雲母基絕緣材料規范.第3部分:單項材料規范.單根導線膠帶用帶有環氧樹脂粘結劑的聚脂薄膜雲母紙
  20. When change the component of adhesive its shear strength increased from 39. 3 mpa to 53. 5 mpa at room temperature and it have long - term usage at 180 with 25 mpa and can be served at 230 in short period. the addition of liquid rubber resulted in a 300 % increase in the peeling strength. the addition of polymer ether imide led to a 260 % increase in the peeling strength, a 15 % increase in shear strength and a 10 increase in tg ( tg = 195. 54 )

    研究結果表明： bmi dds e ? 51 tde ? 85組成的膠粘劑體系的室溫剪切強度為39 . 3mpa ，當改變環氧樹脂的含量時，剪切強度提高到53 . 5mpa ；用無規羧基液體丁腈橡膠改性環氧樹脂膠粘劑時室溫剝離強度提高3 . 0倍；用聚醚酰亞胺改性環氧樹脂膠粘劑，室溫剪切強度最高可達45 . 2mpa ，剝離強度提高2 . 6倍，玻璃化轉變溫度tg = 195 . 54 ，比未增韌體系提高10以上；碳纖維耐磨材料與同步器圓錐環的粘接實驗結果表明，膠粘劑的使用工藝性能良好，滿足室溫剪切強度30mpa和180剪切強度12 . 5mpa的技術要求。
分享友人
分享到 Line

分享到臉書