角齒輪 的英文怎麼說

中文拼音 [jiǎochǐlún]
角齒輪 英文
angle gear
  • 角 : 角Ⅰ名詞1 （牛、羊、 鹿等頭上長出的堅硬的東西） horn 2 （古時軍中吹的樂器） bugle; horn 3 （形狀像...
  • 齒 : Ⅰ名詞1 （牙; 牙齒） tooth 2 （物體上齒形的部分） a tooth like part of anything 3 [書面語] （年齡...
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  • 齒輪 : gear [rack; toothed] wheel; （toothed） gear; wheel gear
  1. Witch has worked out the tooth shape of datum rack and computer simulation of gear manufacture. pointedness, undercut and tooth tip becoming sharp are analysed. tooth thickness calculation and measurement, superposition coefficient calculation and belt length calculation are resolved

    2 、給出了基準齒條的齒廓形狀，進行了齒輪加工計算機模擬，分析了可能出現的稜角問題，進行了齒輪內齒頂圓的求解、根切問題分析、齒厚計算與測量、齒頂變尖的分析、重合度的計算、帶長度的計算及齒輪設計的程序編制等。
  2. These designing parameters include stiffness of epicyclical bearings, synthetic meshing stiffness of gears, stiffness of supporting bearing of out put shaft, mass of inner rack, meshing angle of gears, distance between inputting shaft and supporting shaft and input speed etc. according to these analyses, the possible way for improving the dynamic function of three - ring transmission may be put forward

    這些設計參數包括：行星軸承剛度、齒輪綜合嚙合剛度、輸出軸支承軸承剛度、內齒板質量、齒輪嚙合角、輸入軸和支承軸間距及輸入轉速等，根據這些分析，可以提出改善三環傳動動態性能的可能途徑。
  3. An automated de - noising algorithm based on the energy of wavelet packet not donoho ' s threshold algorithm is established. a gear feature vibration signal extraction method using the wavelet packet energy is proposed, which can separate gear meshing vibration, noise vibration and gear fault vibration signal from the original gearbox case vibration signal. basis pursuit ( bp ) algorithm is introduced into the filed of mechanical signal de - noising and feature extraction for the first time

    第三章擺脫了donoho的閾值消噪思想，從能量的角度建立了基於小波包的自動消噪演算法；提出基於小波包能量分佈的齒輪故障特徵信號提取方法，可以將齒輪嚙合振動信號、干擾振動信號以及故障沖擊振動信號從原始齒輪振動信號中分離出來；首次將基追蹤消噪演算法引入到機械故障信號的消噪與特徵提取上，通過對齒輪故障信號的消噪，表明了它的有效性，並對影響該方法實際應用效果的因素進行了全面的分析，同時也指出了該方法存在的局限性。
  4. 2. the flux characteristics of ordinary helical gear pump are lucubrated by theory for the first time, on this condition the selective qualification of the helical gear pump is gained

    首次對普通斜齒齒輪泵流量特性進行了深入的理論研究，在此基礎上研究了全齒廓嚙合斜齒齒輪泵流量特性，首次得到了完全消除斜齒齒輪泵流量脈動的螺旋角的選擇條件。
  5. On the condition the trapping characteristics of whole profile meshing helical pump are lucubrated by theory for the first time, and the select range of the helical angle that can eliminate completely the trapping of whole profile meshing helical gear pump is also obtained

    在此基礎上，首次對全齒廓嚙合斜齒齒輪泵的困油特性進行了詳細的理論研究，得到了完全消除全齒廓嚙合斜齒齒輪泵困油沖擊的螺旋角的選擇范圍。
  6. 3. the trapping characteristics of ordinary helical gear pump are lucubrated by theory for the first time, the theoretic relation of the gear rotor between the end overlap coefficient and trapping phenomenon is discussed respectively with clearence or without clearcence, and the relation of trapping volume with the rotational angle turn is also discussed. the selective range of the helical angle that can eliminate completely the trapping of helical gear pump is gained, which never appeared in literature before

    首次對普通斜齒齒輪泵的困油特性進行深入的理論研究，分別討論了有側隙和無側隙時普通斜齒齒輪泵轉子的端面重合度與困油現象之間的理論關系，以及困油容積隨轉角的變化關系，得到了完全消除斜齒齒輪泵困油沖擊的螺旋角機械科學研究院博士學位論文的選擇范圍。
  7. Gear operator is removed by unscrewing hex head screws which hold operator to valve body

    通過擰松將操作機構固定在閥體上的六角螺栓來拆卸齒輪操作機構。
  8. The existence of a c - c ( crank - crank ) type of geared five - bar linkages linked with the ground link, the classification and the range of gear ratio and phase angle in the fully rotatability of geared five - bar linkages were mainly studied in this dissertation

    本論文主要研究了齒輪?五桿機構中與機架相連的兩連架桿的雙曲柄的存在條件、齒輪?五桿機構的分類以及在每一分類中齒輪?五桿機構能夠整周轉動時其相位角和傳動比的范圍。
  9. At one time complex structure and area of weariness crack ( including whole suspension hollow axis of swivel, half suspension adopted axletree, substituting holistic grinding steel wheels for wheel - hoop compounded wheels, different wheel - axletree structure of different locomotives, different transmission chamfer machining step of axletresses and driven traction gear etc. ) centralizing make wave clutter and repeat to disturb recognition of real fault wave

    同時，由於全懸掛空心軸、半懸掛抱軸承等復雜結構車軸的使用和整體碾鋼輪陸續替代輪箍組裝式車輪，各型機車輪軸結構不同，車軸加工臺階和過渡圓角不同，從動牽引齒輪與車軸採用過盈裝配等，在這些結構復雜且疲勞裂紋產生集中的區域，探傷時極易發生波形交織和重復，難以識別真正缺陷波。
  10. Although the flux per revolution of the optimized pumps is a little smaller than that of tatsuno combined pumps, other characteristics, such as fluctuation rate, maximum pressure angle and velocity fluctuation rate etc, are much better. the methods to cut gears are proposed in the theory for the practical produce in the future

    雖然，在體積相等的條件下，優化出來的外圓弧包絡線內嚙合齒輪泵的排量略小於tatsuno組合泵的排量，但其它性能（如：流量脈動率、最大壓力角、速度波動量）都更優。
  11. Through systemic analyzing on spiral helical gear transmission with different basic parameters, the essay found out rules of how can such basic parameters influence spiral helical gear engagement characteristics. so it brings forward the auxiliary assembling mode of adopting one straight gear and one helical gear on condition of little axial angle as well as treasures to ameliorate ill engagement performance on condition of large axial angle, another two jobs of the essay are to clarify the wrong concept that spiral helical gear can only transmit movement but not impetus and to provide a brief and practical method of analyzing contact for gear pairs whose surface equations can be written out directly

    通過對不同基本參數的螺旋齒輪傳動進行系統研究，找出了螺旋齒輪基本參數對其嚙合特性的影響規律，提出小軸交角條件下可採用一直齒輪、一斜齒輪的齒輪副組合方式，給出了大軸交角條件下嚙合性能不良的改進措施。澄清了螺旋齒輪只能傳遞運動不能傳遞動力的誤區，為能夠直接寫出齒面方程的齒輪副進行齒面接觸分析提供了一種簡便、實用的新方法。
  12. Precise measurement for helical angle of cylindrical gears

    圓柱齒輪螺旋角的精密測量
  13. Helix angles for cylindrical gear teeth

    圓柱齒輪嚙合的螺旋角
  14. The utility model belongs to the material processing machinery, which comprises mountings, bearings, gears, revolving axles, cutting tools, radial adjusting devices, and angle adjusting devices etc

    它包括機架、軸承、齒輪、回轉軸、刀具、徑向調整裝置、角度調整裝置等。
  15. Remove the right - hand loft angle protractor by releasing the two phillips - head screw holding the two side bars

    通過打開兩邊齒輪的螺絲，將右邊的量角器取出。
  16. The acceptability our rejection and the depiction of some content in the course " mechanisms and machine theory " is discussed, ( e. g., group dividing, solving steps of the graphical method for vector equation, versions and methods for analytical kinematic analysis, inversion design for linkage mechanisms, crank angle between the two limiting positions, design formulae for cam mechanisms, classification of combined mechanisms, formula of the radius of addendum circle of gear, balancing of machinery, etc. ) and some new opinions are presented

    摘要就《機械原理》課程的某些內容（如：拆桿組的方法、矢量方程圖解法的解題步驟、運動分析解析法的版本和方法、連桿機構的反轉法設計、極位夾角、凸輪機構設計公式、組合機構的分類、齒輪齒頂圓半徑公式、機械的平衡等）的取捨和敘述進行探討，提出一些新的看法。
  17. Rake angle and senitopping can be made. it is a high effcient cutting tools

    並可做成正前角或半切頂是一種高效的齒輪工具
  18. The revolving of drum can be performed through three transmissions that is : v - belt, chain and gear transmissions. customers can choose any kinds of transmissions

    該機備有三角膠帶傳動、鏈傳動和齒輪傳動三種傳動形式供用戶選擇。
  19. The influence law of gear ' s bending stress affected by nominal pressure angle and technological angle of tooth profile has been summarized and obtained a conclusion that the maximum bending stress before running in period occurred at the waist place of the tooth, thus provided a theoretical foundation for the design and application of double arced gears

    總結了名義壓力角和齒形工藝角對輪齒彎曲應力的影響規律，並得出跑合前最大彎曲應力發生在齒腰處的結論，為雙圓弧齒輪的設計和使用提供理論依據。
  20. Angle of obliqrity

    壓力角齒輪
分享友人
分享到 Line

分享到臉書