過度牽引 的英文怎麼說

中文拼音 [guòdùqiānyǐn]
過度牽引 英文
hyper traction
  • 過 : 過Ⅰ動詞[口語] （超越） go beyond the limit; undue; excessiveⅡ名詞（姓氏） a surname
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  • 牽 : Ⅰ動詞1 （拉） lead along （by holding the hand the halter etc ）; pull 2 （牽涉） involve; implic...
  • 引 : Ⅰ動詞1 （牽引; 拉） draw; stretch 2 （引導） lead; guide 3 （離開） leave 4 （伸著） stretch 5 （...
  • 過度 : excessive; over; undue; ana-; hyper-
  • 牽引 : 1 （拉） tow; drag; draw; haul; pull; draft 2 [中醫] traction; 牽引車 [機械工程] drafter; tractor...
  1. The effect of cutting speed, cutting thickness, cutting knife and materials on the working power capacity is discussed. finally tractive property of road plane milling machine is also studied. through the comparison of the results of theory calculation and experimental results the equation of working power capacity of milling machine is modified

    本文對冷式瀝青路面銑刨機的動力學工作過程進行了理論分析與試驗研究，並利用金屬材料切削的基本原理，研究了主切削力，並從能量轉化守恆的角度推導了銑刨機銑刨作業阻力和功率計算公式，討論了機器切削速度、銑刨厚度以及刀具與材料特性對銑刨作業阻力和功率的影響規律，最後討論了銑刨機牽引性能，且通過試驗研究驗證了銑刨作業阻力和功率公式。
  2. The key components in laser gyro is he - ne ring laser, and the reciprocal action theory between light and medium is the base in studying the ring laser, use the lamb half classical theory, and on the base of density matrix theory, the optical brounch equation was established, which described the movement of amplifying medium atom in the ring syntonic cavity, and according to the medium polarize theory the self consistent equations was deduced, which describe the light intensity and phasic of the counter - propagating wave. on the basis of this equations, adopted the simulation software matlab and virtual instrument programming language labwindows / cvi, we can do some simulated experiments in study the phenomenas such as amplify and dispersive characteristic of medium, mode pushing effection, burned hole effection and pattern competition, lock - in of frequency and the characteristic of light intensity and phasic of the counter - propagating wave in laser gyro

    激光陀螺的核心部件為he - ne環形激光器，而掌握光與介質的相互作用理論是研究激光器的關鍵，採用拉姆半經典理論為主，在密度矩陣理論的基礎上，推導環形諧振腔中描述he - ne氣體增益介質原子運動的光學布洛赫方程，運用介質極化理論得出描述激光陀螺反向行波的光強、位相所滿足的自洽場方程組，在此基礎上，運用matlab模擬軟體和虛擬儀器編程語言labwindows / cvi ，對激光陀螺中的介質增益色散特性、頻率牽引效應、燒孔效應及模競爭、閉鎖效應及環激光的光強和相位特性進行模擬試驗研究，並且運用全量子理論，對激光工作原理進行分析，得出二能級系統單模輻射場的光子數密度分佈，得出激光場的光子統計分佈，模擬激光場的動態建立過程。
  3. Cu - zn - cr - zr conducting bar alloy and cu - cr - zr end ring alloys used for superpower asynchronous traction motor rotor were prepared by ingot metallurgy. using hardness measurement, tensile test at room and higher temperature, electrical resistance test at room and higher temperature, optical microscopy, xrd, sem, and tem, the mechanical and electric properties and the microstructure of above alloys at different treatment were studied. them were also analysed and explained in theory

    採用鑄錠冶金法制備了大功率異步牽引電動機轉子用導條合金和端環合金，通過硬度測試、室溫拉伸、高溫拉伸、電導率測定、金相分析、 xrd 、 sem 、 tem等方法研究了不同加工工藝和熱處理工藝對上述合金力學性能、導電性能及其組織結構的影響和變化規律，並從理論上進行了分析和解釋。
  4. Through theoretical calculation it gets the sizes required to make this device effective, proves this device can trig the cable car at any place of the railway when the tow steel wire ruptures suddenly provided that the desirable sizes are meted. it also calculates the trigging displacement, acceleration and time

    通過理論計算，得出了該套安全保護裝置合理的尺寸要求，證明了在牽引鋼絲繩發生突然斷裂時，該套安全保護裝置確實能將纜車系統制動在運行軌道的任何位置，並計算出了制動位移，制動加速度和時間。
  5. According to the case studies on japan & russia, the author found out : informal institutions lead the changes of corporate governance through pathway dependence & institutional complementation like a pair of invisible hands ; the combination of original informal institutions and extrinsic formal institutions would improve the performance of corporate governance in the beginning, but as time goes by, which would become a great obstacle, the effectiveness of corporate governance was strongly affected by informal institution

    通過對日俄兩國的實證研究，筆者發現:非正式制度通過制度互補和路徑依賴如無形之手一般牽引著日俄公司治理演變的歷史進程，日俄原有非正式制度與外來正式制度的結合開始有利於公司治理效率的提高，但隨著時間的推移，卻成為公司治理效率提高的阻礙。這對中國公司治理的完善具有深刻的啟示意義。
  6. In chapter 5, using coordinate graphs, the influences of rectangular screw, trapezoidal screw and serrate screw on the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction are compared and analyzed

    第五章，通過坐標圖對比分析了微型機器人在矩形螺紋、梯形螺紋、鋸齒形螺紋下，各螺紋參數對軸向摩擦牽引力、最小粘液膜厚度、粘液膜承載能力、周向摩擦阻力的影響。
  7. In chapter 2, an accurate modified reynolds equation is derived. the modified reynolds equation is solved numerically with the finite different method, the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction under the rectangular screw are obtained. at last, using numeral methods and coordinate graphs, the influences of rectangular screw parameters on the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction are studied and analyzed

    第二章，首先推導了非牛頓流體的變形雷諾方程，化簡了雷諾方程，得出了矩形螺紋下有限差分方程；還推出了矩形螺紋作用下軸向摩擦牽引力、粘液膜厚度、粘液膜承載能力、周向摩擦阻力無量綱表達式，最後用數值計算方法求解，通過坐標圖分析了矩形螺紋參數對軸向摩擦牽引力、最小粘液膜厚度、粘液膜承載能力、周向摩擦阻力的影響。
  8. Results show that all the parts of the artillery produce vibration acceleration in the traveling course. the power spectrum is mainly in the low frequency segment. worse road surface and higher speed will cause higher power spectrum value of the acceleration response

    結果表明火炮牽引行駛過程中各部件均產生振動加速度，其功率譜主要分佈在在低頻段，路況差、速度高則加速度響應的功率譜值高。
  9. By analyzing the relation between the train passing capacity and tunnel length as well as tunnel slopes the upper and lower limits for installing mechanical ventilation in railway double track tunnel have been determined, which provides science foundations for the formulation the ventilation design norm for railway double track tunnels in operation

    通過對列車通過能力與隧道長度和坡度關系的進一步研究，得出了內燃牽引雙線鐵路隧道設置機械通風的上、下界限，為雙線鐵路隧道運營通風設計規范的制訂提供了科學依據。
  10. Secondly, the paper focuses on the efficiency of inference engine. considering the fact that rdb stores the knowledge, we use the following steps : the relational construction and granularity disassembling of knowledge, implicational inference. beyond the above, we consider the advantages of rdb and unite the technology of database ' s index, association and filter to project a mixed inference mechanism

    二是在推理機的推理效率方面，利用知識存儲在數據庫中這一事實， hkbe使用了：知識的關系型構造和粒度分解、牽連推理；並考慮關系型知識庫的特點結合數據庫的索引、關聯和過濾技術，使用混合推理機制。
  11. In chapter 4, the modified reynolds equation is solved numerically with the finite different method, and the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction under the serrate screw are obtained. at last, using numeral methods and coordinate graphs, the influences of serrate screw parameters on the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction are studied and analyzed

    第四章，首先求出鋸齒形螺紋下數值計算所需的有限差分方程，再推出了鋸齒形螺紋作用下軸向摩擦牽引力、粘液膜厚度、粘液膜承載能力、周向摩擦阻力無量綱表達式，最後用數值計算方法求解，通過坐標圖分析了鋸齒形螺紋參數對軸向摩擦牽引力、最小粘液膜厚度、粘液膜承載能力、周向摩擦阻力的影響。
  12. In order to study the vibration in the artillery traveling more accurately and completely, a tire force model of non - linear and self - adapting stochastic contacting mark is set up, and this model provides a good method to study the driving system ' s horizontal and vertical excitation caused by the plainness road surface. the suspension of the tractor is simplified by the model of spring - damp system, and the artillery torque rod is also simplified by torsion spring

    為了更準確和全面地研究火炮牽引行駛過程中出現的振動，建立了非線性自適應隨機接地印跡的輪胎力學模型，該模型能很好地研究路面不平度對火炮牽引系統的垂直和縱向激勵；牽引車懸架簡化為彈簧阻尼系統；火炮扭轉桿簡化為扭簧。
  13. This the production thread application plc carries on procedure control, and realizes to crowd out machine owner ' s electrical machinery and synchronization towing the mechanical and electrical machine is transferred fast ( ly ), and the installation has the good man - machine interface, and all technology parameters all can be set up and show by way of touching the screen, and producing to consult the menu, the order name was formerly fixed in the input, and whole production line just can be according to primary pipe specifications and speed production fixing every time ; cutting the function voluntarily fixed long ( ly ) cuts, and a pattern head temperature is controlled to use the import intellect warm accuse table ( making the temperature deviation within ), therefore having pledged the quality of tube

    本生產線採用plc進行程序化控制，實現擠出機主電機、牽引機電機的同步調速，並設置有良好的人機界面，所有工藝參數均可通過觸摸屏進行設置和顯示，每次生產只需查閱菜單，輸入原先設定序號，整條生產線就可按原設定的管子規格和速度生產；切割機能自動定長切割，模頭溫度控制採用進口智能溫控表（使溫度偏差在1內） ，因此保證了管材的質量。
  14. The case of williams vs. the state of mississippi, decided by a unanimous court in 1896. the state maintains institutions for the insane, the blind, and the deaf

    密西西比州主權委員會的這批文件激起人們有關該州決意保留種族歧視制度的非常令人不安的記憶，就像牽引他們重新步入令人不寒而慄的過去一樣。
  15. In chapter 3, the modified reynolds equation is solved numerically with the finite different method, and the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction under the trapezoidal screw are obtained. at last, using numeral methods and coordinate graphs, the influences of trapezoidal screw parameters on the generated axial thrust force, minimal mucus film thickness, load capacity of hydrodynamic pressure and circumferential friction are studied and analyzed

    第三章，首先求出梯形螺紋下有限差分方程，然後推導了梯形螺紋作用下軸向摩擦牽引力、粘液膜厚度、粘液膜承載能力、周向摩擦阻力無量綱表達式，並用數值計算方法求解，通過坐標圖分析了梯形螺紋參數對軸向摩擦牽引力、最小粘液膜厚度、粘液膜承載能力、周向摩擦阻力的影響。
  16. Cts - 3 has found practical and institutional difficulties in implementing an integrated system involving sharing of revenues among different private operators. therefore it is not practical to pursue a full integrated fare system. however, cts - 3 considers that there are many advantages for the travelling public to use a common payment system for all, or most, public transport modes

    本研究發現推行綜合收費會牽涉不同私人營運者分攤收入的問題，因而會引起實際及制度上的困難。因此，完全合併的收費系統並不切實可行。不過，本研究認為，公眾使用一個共同的繳費系統乘搭所有或大部分公共交通工具會有許多好處。
  17. As for the state own enterprise a rather complicated social economic entity, it is imperative to erect a complete and health evaluation system, that is the performance appraisal system, and through this system, we can reach the following goals : a ) to which extent the employees give the enterprise ; b ) with the incentive system, a considerable high performance of the enterprise can be maintained

    通過建立系統化的考評制度，不僅全面、客觀、科學地評價企業中被考評者對實現國有企業整體目標的貢獻程度，而且配以合理的激勵機製作牽引，以有效地調動個體與組織的積極性和創造潛能，持續提高其績效水平，促進國有企業工作效率的提高和多元化目標的完成。
分享友人
分享到 Line

分享到臉書