配合材料 的英文怎麼說

中文拼音 [pèigěcáiliào]
配合材料 英文
compounding ingredient
  • 配 : Ⅰ動詞1 （兩性結合） join in marriage 2 （使動物交配） mate （animals） 3 （按適當的標準或比例加以...
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 配合 : suitable; fit; matching; rhythm; go together
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. We also attainted mosi2 / sic composite by using melting mosi2 infiltrated sic body which shaped by sic powder. the result show that the diameters of sic particle and shaping methods have effect on the composite ' s microstructure and properties

    另外，嘗試了用mosi _ 2在2050下浸滲直接由sic粉體成型的坯體制備mosi _ 2 / sic復合材料。採用sic顆粒的級配有利於提高坯體密度，但是降低燒結體的緻密度。
  2. In this dissertation, al - si / sicp composites brake rotor with diameter of 1200mm was firstly fabricated by a novel spray deposition technology, and simultaneously coupled brake pad was prepared by a novel dry - powder processing route, termed as two - step pressing process. a wedge pressing technology was developed to densify the as - produce al - si / sicp composite brake rotor

    本文首次採用噴射沉積技術制備了直徑達1200mm的al - si / sicp制動盤，同時採用二次壓制工藝制備出了配套的合成閘片，研究了制動盤的楔壓緻密化技術、機理，復合材料摩擦磨損性能及機理。
  3. It is expectative because of both its eminent performance and simple construction technology, and its economical preponderance. through the test of the six fibers and three gradations, the asphalt mixture of different combination, this paper analyses the fibers influence on the pavement performance, expatiates the strengthening mechanism of the fiber asphalt concrete pavement with theory of composite material and the interfacial chemistry

    本文通過六種纖維和三種礦料級配的瀝青混合料大量室內試驗研究，全面分析了纖維對瀝青混合料路用性能的影響，結合復合材料理論和界面化學知識，較系統的闡述了纖維對瀝青混合料路用性能的改善作用機理。
  4. ( 3 ) the result showed that when ambient temperature rises to a certain degree, the frictional surface of uhmwpe and its composites melt and gelatinize

    門）當環境溫度升高到一定程度， uhmwpe及其復合材料與鋼配副的摩擦界面熔融變為凝膠狀態，其摩擦系數隨摩擦時間的延長保持不變。
  5. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  6. The factors such as the forming technology, the milling time and the mass ration of copper and paraffin in the composite materials which affect the thermal sensitivity, the thermal expansion and the thermal stability of the composite materials are investigated

    通過壓力成型的方法獲得納米銅粒石蠟溫敏復合材料。研究了復合材料不同成型工藝、球磨時間以及復合材料中所含銅粉和石蠟不同質量配比對復合材料熱敏性、熱膨脹性和熱穩定性的影響。
  7. Green building materials production, good ductility, moderate capacity and weight, unmatched grip, easy hanging, iso quality system certification, high intensity of edge, full range of productions and materials

    綠色建材產品，韌性好，容重適中，握釘力強，施工方便，國際標準質量合格證體系，邊部強度高，產品品種和配套材料齊全。
  8. Our main products include pure titanium heat exchanger, titanium steel heat exchanger, all kinds of condensers made of composite material, reaction kettle, titanium single or double pipe coil, titanium centrifugal ventilator, titanium impeller, fan, titanium corrugated pipe, tank, pipe heaters in various specifications, pipe parts, metal fillings, etc

    本廠主要產品有全鈦換熱器鈦鋼換熱器復合材料各種規格的冷凝器反應釜鈦單雙層盤管鈦轉鼓離心機鈦葉輪風機鈦波紋管貯槽各種規格的管式加熱器各種規格管配件金屬填料等。
  9. The author of this article used orthogonal test design, arranged the test scheme scientifically, selected material carefully, at last yielded an ultrahigh strength cement - based material ( uhscm ), whose compressive strength exceeded 100 mpa, mainly by using 42. 5 ordinary portland cement, superfine aggregate : nano sio2, superplasticizers and so on

    本文是在廣泛閱讀國內外有關資料的基礎上，採用正交設計，科學地安排試驗，精心選材，用42 . 5普通硅酸鹽水泥、納米sio _ 2 、高效減水劑等材料，採用常規工藝配製出了一種抗壓強度超過100mpa的高強水泥基復合材料。
  10. Eigenequation about singularity, singular stress fields and electrical displacement fields near the interface edge are obtained under axisymmetric distortion. finally, a special finite element formulation which is based on the principle of minimum potential energy has been developed for determining the orders of the singularity of the singular stress fields around the singular point ( interface edge, interface corner and the interface crack ) in the bonded dissimilar anisotropic / anisotropic, piezoelectric / piezoelectric as well as piezoelectric / anisotropic materials. the numerical results show that this method is very convenient and efficient

    最後，從最小勢能原理出發，在僅僅考慮奇異性支配區域這一前提下，對于彈性接合材料的平面變形問題和擬平面應變問題，以奇異點為原點分別建立極坐標系和圓柱坐標系，通過分部積分消除廠項，從而使奇異性問題的求解由原來的二維降為一維；對於三維變形問題，以奇異點為原點建立球坐標系，通過分部積分消除項，從而使奇異性問題的求解由原來的三維降為二維。
  11. Rubber compounding ingredients - test methods - part 2 : organic accelerators and vulcanizing agents

    橡膠配合材料.試驗方法.第2部分:有機催化劑和硫化試劑
  12. 3 the electrical conductivity of pe / gpe / eg nanocomposites prepared via mmm method had relationship with the compounding ratio of gpe / eg master batch

    3mmm法制備的pe / gpe尼g納米復合材料的導電性與所用si法制備的gpe甩g母料中兩組分的配比有關。
  13. Rubber compounding ingredients - test methods - part 1 : general

    橡膠配合材料.試驗方法.第1部分:通則
  14. Rubber compounding ingredients. carbon black shipment sampling procedures

    橡膠的配合材料.炭黑運輸的取樣程序
  15. Rubber compounding ingredients - test methods - part 3 : antidegradants

    橡膠配合材料.試驗方法.第3部分:抗降解劑
  16. Rubber compounding ingredients. carbon black. determination of loss on heating

    橡膠配合材料.炭黑.熱損失的測定
  17. Rubber compounding ingredients. carbon black. determination of tinting strength

    橡膠配合材料.碳黑.著色強度的測定
  18. Rubber compounding ingredients. protection agent, paraphenylenediamine type. test methods

    橡膠配合材料.對苯二胺型防護劑.試驗方法
  19. Rubber compounding ingredients - carbon black - determination of aggregate size distribution by disc centrifuge photosedimentory

    橡膠配合材料.炭黑.用盤式離心沉澱攝影法測定集料粒度分佈
  20. Rubber compounding ingredients. carbon black. determination of dibutyl phtalate absorption number. part 1 : method using absorptometer

    橡膠配合材料.炭黑.鄰苯二甲酸二丁酯吸收數值的測定.第1部分:吸收計法
分享友人
分享到 Line

分享到臉書