針加熱 的英文怎麼說

中文拼音 [zhēnjiārè]
針加熱 英文
needle heating
  • 針 : Ⅰ名詞1 （縫衣物用的工具） needle 2 （細長像針的東西） needle like things 3 （針劑） injection; sh...
  1. This dissert aims at developing the high - speed temperature - measuring instrument for the application of high energy density heating

    本課題針對高能量密度加熱過程中高速測溫的需要進行專用測溫儀的研製。
  2. Under the assumption that the inner surface of stator sleeve and outer surface of rotor are smooth, taking the fact into account that the temperature of stator sleeve of evaporation cooling motor keeps almost the same, horizontal evaporation cooling motor is simplified as a physical model of two coaxial sleeves, with outer sleeve ( the stator ) holds still and keep at constant temperature and inner sleeve ( the rotor ) is rotating and heated

    本文通過數值和實驗手段研究了臥式蒸發冷卻電機楔形氣隙中的流體流動、傳熱現象。本文在定子套筒和轉子表面光滑的假設下，針對蒸發冷卻電機定子套筒壁面基本恆溫的特點，將實際蒸發冷卻電機簡化為同軸套筒內筒加熱旋轉、外簡靜止定溫的物理模型。
  3. Aimed at the high temperature at furnace roof and wall, great lost of body heat radiation, poor leading heating ability and long soaking time, the compound ceramic fiber coating is used to hold temperature of furnace roof and wall, make the heating loss dropped, shorten soaking time, improve heating ability and reduce evergy consumption

    摘要針對環形爐爐頂爐墻表面溫度高、爐體散熱損失大、導致加熱能力低、待溫時間偏長的問題，選用了復合陶瓷纖維保溫塗料，使爐體散熱損失減少，待溫時間縮短，加熱能力提高，且能耗降低。
  4. Production and processing equipment : bearing production equipment, the ball processing equipment, bearing cleaning equipment, packaging equipment bearings, needle roller processing equipment, light jewelry processing equipment, spherical roller processing equipment, rough processing equipment, double - end grinders, spindle, wheel oilstone and other grinding materials, heat production, high - precision coordinates grinder, and outside grinder, seal marking machine, profilometry, contour dynamic analysis, hardness needle - sorting machine, a round instrument, processing tester, processing meter, dynamic vibration and noise analysis, vibration, noise testing device raceway ultra - precision instrument, roughness measuring instrument, the finish detector, sorting machine, converters and bearing products preservatives, lubricants, cleaning agents, such as processing raw materials

    生產及加工設備：軸承生產設備球加工設備軸承清洗設備軸承包裝設備滾針加工設備光飾加工設備球面滾子加工設備毛坯加工設備雙端面磨床電主軸砂輪油石和其他研磨材料熱處理生產高精度坐標磨床內外圓磨床印子打標機輪廓測量儀輪廓動態分析儀硬度針分選機圓度儀加工測試儀加工測量儀振動噪聲動態分析儀震動噪聲測試裝置滾道超精儀粗糙度測量儀光潔度檢測儀分選機變頻器及軸承產品防腐劑潤滑劑清洗劑加工原材料等。
  5. Syringe and injection needle - render the syinges and needles pyrogen - free by heating at 250 for not less than 30 minutes

    注射器和注射針頭?在250攝氏度下加熱至少半小時使注射器和針頭無帶熱源質。
  6. Then, after a 30 - second rest period, one of stimulators was actiated

    暫停30秒后，又有一個探針被加熱。
  7. From the feature of the force and deformation of the tpih, 5 different elements are used to mesh the different zones of the tube, which are structural beam 3d elastic 4, structural pipe plastic straight 20, structural pipe elastic elbow 18, structural shell elastic 4 node 63 and contact 3d pt - to - surf 49 ; the contact problem is assumed to be flexible - to - flexible ; the temperature field is assumed to be body load. a mechanical model corresponding to reality has been established for numerical simulation. based on the above, the 3 - d fem numerical simulation of tpih has been carried out by using the ansys program

    針對加熱彎管過程的受力和變形特點，採用三維梁單元、三維塑性直管單元、三維彈性曲管單元、三維殼單元與三維點對面接觸單元等5種不同的單元分別對管毛坯不同區域進行劃分，並對接觸單元採用柔體-柔體的處理方法，將溫度場作為體載荷處理，建立了符合實際的加熱彎管問題數值模擬力學模型：在此基礎上，應用商用軟體ansys對加熱彎管過程進行三維有限元模擬與研究，獲得了成形時推力、彎矩、支撐力大小及其變化趨勢。
  8. For many years, the drying furnace has been adopted with sealed structure and electrical heated, dial instruments are used to control the temperature of the drying furnace and to keep it invariable. parameter setting is inputted by manual method, heating time is completely controlled by operators ’ experiences or their moods, meanwhile, its control function is singular, not only having no automatic heating time and insulating monitoring, having no drying process monitoring, but also having no function of automatic recording and report printing, the workers ’ labor intensity is bigger. thus two abnormal situations are always come forth, one is the insulating performance and intensity of works cannot be guaranteed reliably, it perhaps need to be dried repeatedly, the other is always to extend the drying time in order to ensure the drying quality

    多年來乾燥爐一直採用悶罐式結構和電加熱方式，溫度控制採用指針式溫度控制儀表來實現爐溫的恆定，其參數設定由人工輸入，時間控制則完全憑操作者的經驗、情緒來掌握，其控制功能單一，沒有時間控制、絕緣自動監測功能，也沒有乾燥過程監視功能，更沒有多要素記憶、列印存檔功能，工人的勞動強度較大，所以就經常出現兩種異常結果:一是工件的絕緣性能和強度得不到可靠保證，需要反復乾燥;另一種是為保證乾燥質量，往往要延長乾燥時間。
  9. In this dissertation, a special shape cylindrical target of ybco is designed and sintered for the inverted cylindrical dc sputtering ( icds ) device. then, the thickness distribution of the 3 inch size thin films has been simulated

    本文針對3英寸ybco高溫超導雙面薄膜的制備技術，研究了靶材燒制、薄膜膜厚分佈、加熱器設計與製作，制備出了具有87k超導性的3英寸ybco雙面薄膜樣品。
  10. Abstract : to counter the abuse existing in air heating app aratus of gas combustor at ammoniumsulfur drying system, the technique refo rmation of heater is made and is successful

    文摘:針對杭鋼焦化硫銨生產線硫銨乾燥系統的煤氣燃燒器空氣加熱裝置存在的弊端，進行了技術改造，並取得了成功。
  11. Bearings roller bearings and other components. bearing ring precision rolling production line ; a high - precision, super efficient grinding automatic production line ; bearing assembly line ; signal processing equipment ; blank processing equipment ; crowning roller grinder ; end - grinder ; coordinate precision grinder ;, cylindrical grinder ; surface grinder ; spherical roller processing equipment ; raceway grinder ; heat treatment ; needle processing equipment ; polishing processing equipment ; roller - seiki ; rolling auto - sorting machine parts bearing hardness sorting machine bearing cleaning equipment ; contact angle measuring instrument ; contour meter ; bearing life experimental device ; bearing packaging equipment ; roundness instrument ; dynamic vibration noise analyzer ; noise vibration test equipment ; printing machine measuring instrument ; roughness tester ; scanning electron microscope ; finish detector ; inverter ; spindle, wheel, whetstone and other grinding materials

    軸承套圈精密輾擴生產線高精高效磨超自動生產線軸承自動裝配線球加工設備毛坯加工設備凸度滾子磨床雙端面磨床高精度坐標磨床內外圓磨床平面磨床球面滾子加工設備溝道磨床熱處理生產滾針加工設備光飾加工設備滾道超精機滾動體自動分選機軸承零件硬度選別機軸承清洗設備角接觸測量儀輪廓測量儀軸承壽命實驗裝置軸承包裝設備圓度儀振動噪音動態分析儀振動噪音測試裝置印字機加工測量儀粗糙度測試儀掃描電子顯微鏡光潔度檢測儀變頻器電主軸砂輪油石和其他研磨材料
  12. For the sake of realizing compressive ignition of single fueled natural gas and aiming at the characteristics of high spontaneous combustion temperature of natural gas, the separated combustion chamber provided with low heat radiation structure was designed, meanwhile the heating device for the intake pipe air and the ceramic electro - thermal plug heating device inside the separation chamber were set up

    摘要為實現單一燃料天然氣的壓燃著火，針對天然氣自燃溫度高的特點，設計了具有低散熱結構的分隔式燃燒室，同時設置了進氣管空氣加熱裝置和分隔室內陶瓷電熱塞加熱裝置。
  13. Analysis on the causes of damage, this paper modified the meijia bitumen materials in order to enhance the low temperature capacity of bitumen and bituminous mixture through the polymer. emphasis on the study of low temperature capacity of modified asphalt and bituminous mixture, we utilize reasonable construction craft to avoid the cracks problem between bituminous mixture and bridge and give a advance way of small or moderate span bridge expansion joint in low temperature areas

    針對這一缺陷，本文通過添加熱塑性橡膠類改性劑和橡膠類改性劑，對美佳改性瀝青結合料進行二次改性，重點研究了改性后瀝青結合料和混合料的低溫性能，並採用合理的施工工藝解決填縫料與梁端間存在的界面裂縫問題。
  14. 5. the control systems of the heater are designed by the adaptive fuzzy neuron control arithmetic. the step response curve is got. the results show their nice performances

    針對實驗室電加熱爐系統，使用自適應模糊單神經元控制演算法進行控制系統的設計，得出階躍響應曲線，取得了滿意的控制效果。
  15. Two programmable digital electronic pid temperature controllers, one for each heating platen, is driving each a proportional electronic relay connected to the bank of heater cartridges

    針對每個熱壓臺採用兩個可編程數字式電子pid溫控器，每個分別驅動連接到加熱模組上的比例電子繼電器。
  16. In view of the present situation, in this paper, a new moisture analyzer which combines infrared drying oven and electronic balance is proposed takes dsp as the information processing unit. it presents the instrument structure and the hardware design of the system. it actualizes the temperature real time control in the drying equipment through controlling the power of the heater element and taking an complex control method

    針對這一現狀，本文提出了一種將紅外乾燥箱和電子天平相結合，利用dsp作為信息處理單元的水分測定儀;給出了儀器結構和dsp系統的硬體電路設計;研究通過對加熱元件的功率控制實現乾燥箱的溫度控制，採用智能復合控制策略對乾燥箱的溫度進行實時控制，乾燥箱的溫度達到105的時間可由單純pid控制的2分鐘減少到1分鐘，且控制精度高。
  17. This paper analyses the water - film formation in steam heating roller and its influence on heat conduction performance to roller, and then provides a better settlement scheme for the problem of how to eliminate the water - film and improve the heat conduction performance of the roller

    摘要就蒸汽加熱輥中水膜的形成、對輥筒的導熱性能的影響進行了分析，針對如何消除水膜、提高輥筒導熱性能的問題提出了解決方法。
  18. Abstract : the in servie tubular heaters built early in refineries and chemical plans have low thermal load and low heat efficiency, therefore measures for technical reform are offered, including ( 1 ) enlarging the surface area of convection tubes to increase the thermal load of rhe convection section ; ( 2 ) increasign the heat interchanging area of radiant tubes ; ( 3 ) changing the height of the chimney ; ( 4 ) using new burner with forced air supply to increase calorific capacityu ; ( 5 ) adding air preheater between the convection section and chimney to enhence the temperature of the air entering the furnace ; ( 6 ) adopting high temperature radiant coating to improve the effect of radiant heat interchanging

    文摘:針對早期建造的煉油廠和化工廠在役管式加熱爐熱負荷和熱效率低的狀況，提出了若干技術改造措施包括，增大對流管表面積以增大對流段的熱負荷；增加輻射管的換熱面積；修正煙囪高度；換用新型燃燒器，變自然通風為強制供風，以增大燃燒器的發熱量，減小過剩空氣系數，節省燃料2 % 3 % ；在對流段和煙囪之間增設空氣預熱器以提高空氣入爐溫度；採用高溫輻射塗料增強輻射換熱效果，從而增加熱源對爐壁的輻射傳熱量和爐管的傳熱量等。
  19. The in servie tubular heaters built early in refineries and chemical plans have low thermal load and low heat efficiency, therefore measures for technical reform are offered, including ( 1 ) enlarging the surface area of convection tubes to increase the thermal load of rhe convection section ; ( 2 ) increasign the heat interchanging area of radiant tubes ; ( 3 ) changing the height of the chimney ; ( 4 ) using new burner with forced air supply to increase calorific capacityu ; ( 5 ) adding air preheater between the convection section and chimney to enhence the temperature of the air entering the furnace ; ( 6 ) adopting high temperature radiant coating to improve the effect of radiant heat interchanging

    針對早期建造的煉油廠和化工廠在役管式加熱爐熱負荷和熱效率低的狀況，提出了若干技術改造措施包括，增大對流管表面積以增大對流段的熱負荷；增加輻射管的換熱面積；修正煙囪高度；換用新型燃燒器，變自然通風為強制供風，以增大燃燒器的發熱量，減小過剩空氣系數，節省燃料2 % 3 % ；在對流段和煙囪之間增設空氣預熱器以提高空氣入爐溫度；採用高溫輻射塗料增強輻射換熱效果，從而增加熱源對爐壁的輻射傳熱量和爐管的傳熱量等。
  20. The improved determination method to determine the nacl of the heavy alkali of less salt is described in the paper, its accuracy and feasibility are verified by test, and the improved method can get good results

    摘要文章針對純堿企業低鹽重堿分析中氯化鈉含量難以準確測定這一難題，提出了加大稱樣量、加熱除氨、硝酸中和除二氧化碳的改進方法，並通過實驗對改進方法的可行性和準確性進行了驗證，取得了滿意的效果。
分享友人
分享到 Line

分享到臉書