電導率電導性 的英文怎麼說
中文拼音 [diàndǎolǜdiàndǎoxìng]
電導率電導性
英文
conductivity-
In experiment, the dsc technique was used to analyze the effect of electric fields on the precipitate kinetic of al - li alloy solutionized with electric fields. the energy spectrum, tem and sem techniques are employed to investigate the elements solution, precipitates, fracture character, conductivity and vickers hardness. also, the solidification of al - cu eutectic alloy was conducted with the influence of electric fields
在實驗上，利用dsc熱分析技術，分析了電場作用對al - li合金相析出動力學的影響；採用能譜成份檢測，透射電鏡和掃描電鏡等多種微觀檢測手段，對鋁合金的析出相，斷裂特徵、合金電導率和維氏硬度等性能在電場作用下的變化進行了系統的研究，並觀察了al - cu共晶合金在電場作用下的凝固組織。Ionic liquids are extensively studied in areas of chemical synthesis, separation technology, electrochemistry and material processing due to their unique properties such as high electrical conductivity, high thermal stability, low measurable vapor pressure and incombustibility
摘要由於離子液體具有電導率高、熱穩定性好、蒸氣壓低、不燃燒等優良性質，越來越多地應用於有機合成、分離、電化學和材料加工等領域。The process of growing ktp crystal of high quality and low conductivity was studied. it was pointed out that many factors such as the uniformity of temperature distribution in the furnace, the accuracy of temperature control, the quality and direction of seed crystal and the speed of temperature drop all had an important influence on the quality of ktp crystal
研究了生長高光學質量、低電導率ktp晶體的工藝過程，指出晶體生長爐溫度場的均勻性、控溫精度、籽晶的質量和定向以及降溫速度的快慢對晶體的光學質量有著重要的影響。When the water mass fraction of the substrate is about 4500, its ec can be predicted accurately by both the power function as well as the linear function models
控制基質質量含水率在45 %左右的條件下，用冪函數和線性函數預測基質電導率都獲得了較高的精度。The adulterated edible oil could be determined by detecting the regular physicochemical indexes, metal ion content, conductivity, sdbs content, afb1, volatile material, fatty acid composition, cholesterol, ir and uv characteristic absorption
通過對油脂的常規理化指標、金屬離子含量、電導率、十二烷基苯磺酸鈉（ sdbs ） 、黃麴黴毒素、揮發性物質、脂肪酸組成、膽固醇、紅外及紫外特徵吸收等指標進行定性定量分析，可以鑒別食用油是否摻偽。The results show that effects of alkali metal salts on conductivity are different because of their different anion radium, crystal lattice energy, ionic mobility and solubility in electrolytes, that different ionic conduction modes of electrolytes result to double - peak of salt concentration dependence of conductivity and different temperature dependence, and that different influences of plasticizer to conductivity result from their different action
結果表明，不同堿金屬鹽對電解質電導率的影響因其陽離子半徑、晶格能、離子淌度以及在電解質中的溶解度的不同而不同;電導率的鹽濃度依賴性因電解質的離子傳導方式不同而明顯呈現雙峰形;增塑劑對電導率的影響則因其作用方式不同而產生不同的效果;電導率的溫度依賴性也因電解質的離子傳導方式不同而呈現不同的規律。Using diethanolamine as aminating agent and glacial acetic acid as neutralizing agent, aminated epoxy acrylic cationic resin was prepared. the effect of technology of aminated epoxy acrylic resin on properties of eletrodeposition was studied by conductivity meter and electrophoresis apparatus. it was shown that, conductivity firstly decreased, and then increased with aminating temperature increase. in contrast with putting polyacrylic resin into thin acetic acid solution, the more compact film could be achieved by neutralizing polyacylic resin with glacial acetic acid and then add it into water. when neutralizing temperature was enhanced, the speed of electrodepsidon was found to increase, and the film was also more compact. increasing the dn leads to enhanced conductivity and smaller particle size. when dn equaled to 80, the smoothest film could be achieved
以二乙醇胺為胺化劑、冰醋酸為中和劑，合成了胺化環氧丙烯酸陽離子樹脂.採用電泳儀和電導率儀，研究了胺化環氧丙烯酸樹脂合成工藝對陰極電泳塗料電沉積性的影響.結果表明，隨著胺化溫度的增加，電泳液電導率先下降後上升.將冰醋酸加入樹脂中中和，後用水稀釋，比樹脂在醋酸稀溶液中中和，電沉積性能更好.電沉積速率隨著中和溫度的上升而增加，電沉積膜緻密性相應增加.中和度（ dn ）愈高，電泳液電導率愈大，粒徑越小，而塗膜外觀在中和度為80時達到最佳2801 and lbg was used as polymer matrix because of their different hfp ratio, dbp was used as plasticizer. the films were made by bellcore method. structure, crystallinity, liquid uptake and conductivity of the films with different ratio of pvdf dbp sio2 was determined
本文用hfp含量不同的2801和lbg為基體， dbp為增塑劑，採用bellcore方法制膜，得到了聚合物電解質的結構、結晶度、吸液量和電導率隨sio _ 2 、增塑劑含量、聚合物結晶度的變化規律，並對納米無機粒子改性聚合物電解質的機理進行了一些探討。In this article, the bellcore method was used to prepare polymer electrolyte membrane based on pvdf - hfp, and polymer electrolyte membranes under different conditions were prepared by changing sorts of solvents 、 ratio of dbp and solvent. effects of ratio of plasticizer and solvent on the liquid uptake 、 sem 、 mechanism capability 、 ionic conductivity 、 electrochemical stability window of polymer electrolyte membrane were also studied. through optimizing the preparation technics, the integrated effects of additives such as pc 、 ec 、 dbp and nanophase al2o3 on the ionic conductivity 、 liquid uptake were studied
本文以聚偏氟乙烯-六氟丙烯共聚物pvdf - hfp為基質，採用bellcore制膜法制備了pvdf - hfp聚合物電解質膜，通過改變增塑劑dbp的含量、溶劑的種類及溶劑的含量制備了不同條件下的聚合物電解質膜，分別研究了增塑劑含量、溶劑含量等對聚合物電解質膜的吸液率、表面形貌、機械性能、離子電導率、電化學穩定窗口等的影響;對制備工藝進行了優化，研究了各種添加劑如pc 、 ec 、 dbp及納米al2o3對聚合物電解質膜的離子電導率、吸液率等性能的綜合影響。The microstructure in this system shows randomly oriented fine plate - shaped grains with multi - layered structure. the fine grains randomly oriented ( strong grain boundary scattering ) and pores in these sintered samples could decrease the electrical conductivity. however, on the other hand, the fine grains randomly oriented and pores could lead to a dramatic decrease in the thermal conductivity
燒結樣品的顯微結構由具有多層片狀結構的顆粒組成，材料的顯微結構直接影響到材料的電導率和熱導率，細小顆粒和氣孔的存在會引起電導率的降低，同時也能降低材料的熱導率，優化材料顯微結構是提高材料的熱電性能的關鍵步驟。Important features of mitex rollers include : long service life and cost efficiency ; high chemical resistance ; extreme high operating temperatures ; best running properties at high speed ; dynamic endurance ; excellent wear and cut resistance ; minimal hardening and glazing ; excellent coating and transfer characteristics ; and adjustable electrical properties
Mitex輥產品優點：在高速度下保持優異性能；使用壽命長，效率高；抗化學腐蝕；超耐高溫；耐磨；最低限度的硬化和磨光；優異的塗布和轉移性能；精確的電導率。The main tests and researches are as following : to study the ac flashover characteristic of composite insulator in different icing states by imitating tests in multifunctional artificial climate chamber, and analyze the effect of ice amount and icing water conductivity on flashover voltage, put forward a flashover mechanism by analyzing the icing flashover process. to study the ac flashover characteristic of composite insulator in different altitude and icing states together by imitating tests in multifunctional artificial climate chamber, and mainly analyze the effect of altitude ( air pressure ) and ice amount on flashover voltage, and investigate the flashover mechanism. to investigate the effect of high altitude and icing on the hydrophobicity of composite insulators
本文主要進行了以下試驗研究： 1 ）在多功能人工氣候室里模擬不同覆冰程度下合成絕緣子的交流閃絡特性，主要分析覆冰量和覆冰水電導率對閃絡電壓的影響，並對其覆冰閃絡過程進行機理分析； 2 ）在多功能人工氣候室里模擬不同海拔高度和覆冰程度綜合作用下合成絕緣子的交流閃絡特性，主要分析海拔高度（即氣壓）和覆冰量對閃絡電壓的影響，並進行閃絡機理分析； 3 ）研究高海拔和覆冰對合成絕緣子憎水性的影響。With regard to the special environment of high altitude and ice, this paper mainly studies the effect of altitude ( air pressure ), icing states ( ice amount ) and icing water conductivity on the ac flashover characteristic of composite insulators. furthermore, it analyzes the hydrophobicity of composite insulators in these environments
針對高海拔和覆冰地區特殊的環境，本文重點研究海拔高度（即氣壓） 、覆冰程度及覆冰水電導率等對合成絕緣子交流閃絡特性的影響，並且對合成絕緣子在高海拔和覆冰環境下的表面憎水性變化進行分析。This study was conducted to examine the interrelationship of 10 seed vigor traits in 12 wheat genotypes through variance, co - variance and path coefficient analysis, to determine broad - sense heritability, and to estimate genetic advance under selection. the genotypes showed significant difference for all traits, except for percentage of normal seedling. genetic correlation between conversion efficiency of seed reserve, electrical conductivity with other traits were not significant, showed that selection for any of them might be possible without hampering any other traits. however path coefficient analysis indicated that conversion efficiency of seed reserve, seed reserve utilization ratio have strong direct effect in affecting seedling weight, and that mean germination time has significantly negatively correlated in affecting gi. moderate to high estimates of broad - sense heritability, genetic coefficient of variation and expected genetic advance were obtained for electrical conductivity, germination index, mean germination time, seed dry weigh, seedling dry weigh, seed reserve depletion ratio indicating the possibility for improving these traits
本研究利用12個普通小麥品種對10個種子活力性狀的遺傳變異和相關研究，表明除正常幼苗百分率外，其餘種子活力性狀在品種間均存在顯著的差異.種子貯藏物質轉換效率、電導率兩個性狀間及與其它性狀均無顯著的遺傳相關，因此對他們的選擇不會影響到其它性狀.通徑分析表明幼苗干重主要取決于種子貯藏物質轉換效率、種子貯藏物質利用速率;發芽指數主要由平均發芽時間決定.電導率、發芽勢、幼苗干重、種子干重、發芽指數、種子貯藏物質消耗比率6個性狀表現中到高的遺傳力、遺傳變異系數和相對遺傳進展，指明通過遺傳育種手段改良這些性狀是可能的The questions the researcher concerned are which system will be chosen and how to obtain the good lithium ionic conductor materials, which is the basic departure of the paper. the addition of second phase in composite can change the interface structure and the conduction mechanism, improve the matrix conductivity and other function such as the sintering, crisping and so on, so the research of composites are an interesting field of the ionic conductors. the synthesis of lithium ionic conductor is often by solid state reaction, but this method needs high temperature and leads to the volatility of lithium which not only causes the drift of the compounds but gets the no well - distributed materials
研究者所關注的問題是選擇新的體系進行研究，以期得到性能更好的鋰離子導體材料，這也正是本論文的基本出發點；復合離子導體中第二相的加入改善了基質的界面結構和導電機制，不僅可以提高基質材料的電導率，還可以在一定程度上改善材料的其它性能，如燒結性能、脆性和機械強度等。因此復合材料的研究是離子導體一個有廣闊前景的發展方向；合成鋰離子導體，特別是成分復雜的體系以傳統的固相合成法為主，但這種方法需要較高的溫度，容易引起鋰的揮發，從而造成產物組成的偏移，而且不易得到顯微結構均勻的材料。Synthetically applying abnormal values of magnetism, electric conductivity and high resolution gravity of soil, this paper presents an approach of predicting the prospective oil and gas areas in biyang sag, and good effects have already been obtained
摘要綜合運用土壤磁性電導率異常結合高精度重力異常，對泌陽凹陷有利含油氣區域進行預測，取得了較好的效果。Through the research of crosslinking of matrix resin, heating treatment of composite and mixing of different polymer, we draw some conclusions : 1 、 percolation theory can explain the phenomenon of the jump of resistance when the content of cb reach a critical volume ; 2 、 based on ohm conduct theory, abounded to the percolation the wbibull statistical theory and other theory, an adapted theory was obtained to explain the jump of resistance and the other phenomenon ; 3 、 the ntc phenomenon was eliminated by crosslinking the matrix of conductive composite, at the same time the stability of composite was improved
通過對基體樹脂的交聯、復合材料的熱處理、聚合物共混物的研究得出了如下的結論： 1 、滲濾理論能夠很好的解釋導電粒子含量達到某一值時電導率劇增的問題； 2 、在歐姆導電模型的基礎上，綜合應用了weibull統計理論模型，結合原來的體積膨脹等理論，成功的解釋了ptc復合材料在基體材料熔點附近的跳變問題、 ntc現象以及熱循環穩定性等問題； 3 、有機ptc導電復合材料經硅烷交聯以後能夠消除ntc現象，改善了導電復合材料的穩定性能。Cu - zn - cr - zr conducting bar alloy and cu - cr - zr end ring alloys used for superpower asynchronous traction motor rotor were prepared by ingot metallurgy. using hardness measurement, tensile test at room and higher temperature, electrical resistance test at room and higher temperature, optical microscopy, xrd, sem, and tem, the mechanical and electric properties and the microstructure of above alloys at different treatment were studied. them were also analysed and explained in theory
採用鑄錠冶金法制備了大功率異步牽引電動機轉子用導條合金和端環合金，通過硬度測試、室溫拉伸、高溫拉伸、電導率測定、金相分析、 xrd 、 sem 、 tem等方法研究了不同加工工藝和熱處理工藝對上述合金力學性能、導電性能及其組織結構的影響和變化規律，並從理論上進行了分析和解釋。The paper proves that in the 2d non - linear case, the coulomb gauge is been meet naturally. in the paper, the second - order isoparametric fem is adopted in the non - linear transient magnetic field simulating excited by current source and the results of transient field and static field solved by the second - order isoparametric and linear fem are compared and analyzed, besides, the effect of the eddy currents in the magnetic materials of the different conductivity is analyzed, it is obtained that the magnetic material of high magnetic conductivity and low loss should be chosen in designing of pma
文中採用二次等參元有限元法推導出在電流源激磁下的非線性瞬態磁場的計算方法和編制了相應的計算程序，並採用二次等參元有限元法和雙線性有限元法分別對瞬態場和靜態場進行了計算，並對計算結果進行了誤差分析，此外，還對不同電導率的導磁材料中渦流產生的影響進行了分析，得到結論設計永磁操動機構時，應選擇導磁性能好，損耗低的導磁材料。Standard test method for hydraulic conductivity compatibility testing of soils with aqueous solutions
含水溶液土壤的液壓電導率相容性試驗的標準試驗方法分享友人