電弧強度 的英文怎麼說

中文拼音 [diànhúqiángdù]
電弧強度 英文
arc stiffness
  • 電 : Ⅰ名詞1 （有電荷存在和電荷變化的現象） electricity 2 （電報） telegram; cable Ⅱ動詞1 （觸電） give...
  • 弧 : 名詞1. [數學] （圓周的任意一段） arc2. （古代指弓） bow
  • 強 : 強形容詞（強硬不屈;固執） stubborn; unyielding
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  1. We are specialized in producing sets of large - hex high - strength bolts, sets of torshear type high - strength bolts, sets of dacrolon bolts and cheese head studs for arc stud welding

    我公司技術力量雄厚，生產設備精良，檢測設備完善，是生產鋼結構用高強度大六角螺栓連接副、扭剪型螺栓連接副、達克羅螺栓連接副和電弧螺柱焊用圓柱頭焊釘的專業公司。
  2. The axial magnetic field distribution on center surface of contact gap and contact piece are calculated when the current is at peak. it can be found that the intensity of axial magnetic field and radial magnetic field uniformity are strengthened after the iron core is put into, this helps to improve the stability of the vacuum arc

    計算了電流峰值時觸頭間隙中心平面和觸頭片上的縱向磁場分佈，可以看出加入鐵芯后縱向磁場強度和徑向磁場均勻性增強，這有利於提高真空電弧的穩定性。
  3. Rapid prototyping technology changed the traditional pattern of product design, which could offer product sample for the designer, reduced design cycle and quicken the schedule of new product design, and it gave the decision - makers visual feeling. ; rp technology provided kinds of molds including resin - boncled mold laminate mold, investment mold and lost foam casting mold and so on for sand casting investment casting and cavityless casting, it could also use direct shell production casting to make pattern dies metal dies die - casting dies injection dies directly, and it could even produce casting products in small scales. the applications of fdm technology in plaster precision casting and the rapid casting technology based on sls technology were introduced, the organic combination between rapid prototyping tecnnology and foundry process, which initiated a new period of rapid manufacturing metal parts, by using advanced new technology alternated traditional foundry industry to make it looked brand - new, thus, the competition of foundry industry would be improved ; rapid prototyping technology offered a rapid economical feasible technical method, common processes of using rapid prototyping technology to produce dies were discussed, in the paper it explored that. the problem of combining rapid prototyping technology with electric arc metal - spraying technology to make metal dies and technics in dies manufacturing of combining rapid prototyping technology with precision casting, rapid tooling based on rapid prototyping, integrated advanced new technology and tradition technology of rapid prototyping manufacture, each superiority were exerted, rapid prototyping technology had been an efficiency measure to rapid update products and develop new product, and to middle -

    快速成型技術改變了傳統的產品開發模式，可以為設計者提供產品樣件，縮短設計周期，加快新產品的開發進度，為決策者提供直觀性；快速成型技術迅速提供砂型鑄造、熔模鑄造、實型鑄造用的各種模樣，包括樹脂模、層壓模、熔模和消失模等，還可採用直接制殼鑄造法直接製造熔模鑄造用的壓型、金屬型、壓鑄型、注塑模，甚至直接製造小批量鑄件，介紹了熔積成型技術在石膏型精密鑄造上的應用和基於選擇性激光燒結技術的快速鑄造技術，快速成型技術與鑄造工藝的有機結合，開創了快速製造金屬零件的新階段，對用高新技術改造傳統的鑄造工業，使其面貌煥然一新，增強鑄造行業的競爭能力；快速成型技術為母模的製造提供了一條快速、經濟、可行的技術途徑，討論了利用快速成型技術製造模具的一般工藝方法，探討了將快速成型技術與金屬電弧噴鍍技術結合起來快速製造金屬模具問題，以及快速成型技術與精密鑄造技術相結合的模具製造工藝，基於快速成型製造的快速模具技術，集成了快速成型製造高新技術和傳統技術，發揮各自優勢，已成為產品快速更新換代和新產品開發及中、小批量生產的有效手段之一。
  4. In addition, electric field distribution of arc - quenching chamber is calculated in adopting anasys software and the largest electric field intention is analyzed under the impulsion voltage and infrequency voltage, then the size of insulation porcelain cover is determined

    採用anasys軟體計算了滅弧室電場分佈，並對沖擊電壓和工頻電壓下的最大電場強度進行了分析，確定了絕緣瓷套的尺寸。
  5. The main work and conclusion for this paper is as following : according to the flashover test results of several kinds of iced insulators under positive voltage and negative voltage, this paper obtained : for the single porcelain insulator, the single glass insulator and the composite insulator bridged completely by icicle, the metal cathode ' s strong ability of emission electron is the primary reason that results in the lower negative flashover voltage ; the position difference of the high resistance district in method anode side results in that porcelain insulator cluster and glass insulator cluster have an evident effect of polarity ; when less ice and no icicle at the brim of the sheds, due to numerous non - polar arcs on the composite surface, the effects of polarity of composite insulator was lost using the test method of the average flashover voltage in the freezing period, dc flashover performances were investigated of several insulators with some typical structures and different material

    本文的主要工作和結論如下：在人工氣候室內，根據不同覆冰絕緣子正、負極性下的閃絡試驗結果，得出負極性電弧金屬陰極的強電子發射能力造成了單片瓷、玻璃絕緣子及被冰凌橋接的合成絕緣子有較低負極性冰閃電壓；正極性電弧金屬陽極側產生高電阻區所處位置的差異使得瓷和玻璃絕緣子串具有明顯的極性效應；覆冰較少時，合成絕緣子表面出現數量較多的非極性電弧使合成絕緣子無極性效應。利用覆冰期內平均閃絡電壓的試驗方法，對不同材質和結構的絕緣子在覆冰、低氣壓和污穢共存環境中的直流閃絡特性進行了研究。試驗結果表明，直流平均閃絡電壓隨著海拔的升高、覆冰量的增加以及污穢度的增加而降低，且其特徵指數與絕緣子結構、覆冰量、覆冰狀態、污穢度等有關。
  6. Welding consumables - wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - classification

    焊接消耗品.高強度鋼氣體保護金屬弧焊鍍層和焊條，金屬絲，金屬電極.分類
  7. The material of electro - fused magnesia sinter is selected from special grade a natural magnesite or high - purity caustic calcined magnesite, which is fused in arc furnace to finish the products. the products possess high purity, crystal with and compact texture, have high heat - vibration steady and cinder corrosion resistant, it is used for making high quality magnesite bricks, magnesia - carbon bricks

    電熔鎂砂是用精選的特a級天然菱鎂石，在電弧爐中熔融制得，該產品具有純度高，結晶緻密，抗渣性強熱震穩定性好，是製作高檔鎂磚，鎂碳磚及不定形耐火材料的重要原料。
  8. Mag welding solid wires for mild steel and high strength steel

    低碳鋼及高強度鋼用金屬極活性氣體保護電弧實心焊絲
  9. Flux cored wires for gas shielded and self - shielded metal arc welding of mild steel, high strength steel and low temperature service steel

    低碳鋼高強度鋼和低溫鋼用氣保護和自保護金屬電弧焊用管狀焊絲
  10. The integral method is adopted caculate and analyze to amf three - dimension distruction which is the structure of coil type four - pole and the structure of coil type double - pole and study the size of two kind of electrode structure axial magnetic flux density distribution and its fielduniformity. the finite - element method is used simulate that eddy current has effect on amf when contact tray of douple - pole amf structure is slotted or no

    本文採用積分方法對本文設計的線圈式兩極縱向磁場觸頭結構和線圈式四級縱向磁場觸頭結構的縱向磁場三維分佈進行了計算分析。研究了電弧燃燒期間兩種觸頭結構縱向磁場強度的大小、均勻性，利用有限元法模擬線圈式兩極縱向磁場觸頭結構的觸頭盤開槽和不開槽時渦流對縱向磁場的影響。
  11. Abstract : the shaped technique of the electric arc tube s shell with neck, which is used in the small power metal - halide lamp, is introduced in this paper

    摘要:超小功率高強度氣體放電燈電弧管電極極間距誤差要求小，二電極對中要求高，所以採用在電弧管泡殼兩端加縮頸來定位電極。
  12. Welding consumables - tubular cored electrodes for gas shielded metal arc welding of high strength steels - classification ; german version en 12535 : 2000

    焊接耗材.高強度鋼的氣保護金屬電弧焊接用管狀焊條
  13. By improving surface condition of parts and one shot seal - off clean room grade, using ultrasonic vapor phase cleaning process, the inner parts of vacuum interrupter get cleaner. movable particles have been diminished by automatic current ageing, power frequency hi - voltage ageing and dynamic high current ageing. as the dielectric strength of clearance in vacuum interrupter improved, the probability of re - ignition in test drops evidently

    通過提高零件表面加工質量，改善一次封排間的真空衛生條件、制定合理的超聲波氣相清洗工藝提高管內潔凈度，採用自動電流老煉、超高壓工頻老煉、大電流動態老煉等工藝進一步消除真空滅弧室內活動性微粒，可提高真空滅弧室真空間隙介質強度，使真空開關投切電容器組的重燃率大大降低，並通過實驗驗證真空開關投切電容器組的重燃率在製造工藝改進後由原來的10 . 7 %降低至1 . 3 % 。
  14. Welding consumables. covered electrodes for manual metal arc welding of high strength steels. classification

    焊接消耗材料.高強度鋼的手工電弧焊接用金屬藥皮焊條.分類
  15. Welding consumables. wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. classification

    焊接消耗品.高強度鋼的氣體保護金屬極電弧焊用焊絲電極焊絲焊條和沉積金屬.分類
  16. Welding consumables - wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - classification ; german version en 12534 : 1999

    焊料.高強度鋼的氣體保護金屬極電弧焊接用焊絲電極
  17. Welding consumables - tubular cored electrodes for gas shielded metal arc welding of high strength steels - classification

    焊接消耗材料.高強度鋼的氣體保護電弧焊用管狀有心焊條.分類
  18. Chapter one of the thesis introduces the vacuum structure, operation principle and electric arc characteristic of the vacuum killing arc room concisely, and retrospected the development of the vacuum killing arc room briefly, and indicated the research purpose and meaning of thesis at the same time. chapter two introduces the design process and manufacturing technology of the vacuum killing arc room possessing cup form horizontal magnetism touch head structure. electric magnetic field finite element, an analytical soft of ansoft company, and msc non - linear finite element, an analytical soft of marc of company, have been adopted to analyze the distribution state of the horizontal magnetic field between the touch heads, electric field intensity distribute state and temperature rise situation which the touch head produced

    論文的第一章首先是對真空滅弧室的結構、工作原理和電弧特性進行了簡明的闡述，同時對真空滅弧室的發展做了一個簡要的回顧，並表明了本論文的研究目的和意義;第二章介紹了杯狀橫磁真空滅弧室的設計過程和製造工藝;採用ansoft公司電磁場有限元分析軟體和msc公司marc非線性有限元分析軟體分析了觸頭結構產生的橫向磁場在觸頭間的分佈狀況、電場強度分佈狀況以及溫升情況。
  19. The influence of the height, width and the shape of the metal barrier is calculated in this paper. the simulation results show that the shape of the barrier boundary has great influence on discharge efficiency. the variation of electron temperature with gas pressure is also investigated and its result is coincident with the recorded data

    對新型蔭罩式結構分析了單元結構的變化對電子平均溫度和放電效率的影響，並觀察了隨壓強的變化電子平均溫度的變化趨勢，模擬結果表明斜邊或弧狀的內斜式結構可提高放電效率，且電子溫度隨壓強的變化趨勢同文獻相符。
  20. This paper designs a device of testing the arc shield voltage in the vacuum interrupter, and makes a study of the arcing and after - arcing recovery characteristics of the arc shield by measuring the arc current, the arc voltage, the recovery voltage and the arc shield voltage

    本文設計了真空滅弧室屏蔽罩電壓測量裝置，並對真空滅弧室在燃弧和弧后介質強度恢復過程兩個階段的電弧電流、電弧電壓、恢復電壓和屏蔽罩電壓進行了全面、系統的波形測試，研究了真空滅弧室蒸汽屏蔽罩在燃弧和弧后介質強度恢復過程的特性。
分享友人
分享到 Line

分享到臉書