cast surface 中文意思是什麼
cast surface
解釋
鑄件表面-
The cast basalt tiles may be used in all kinds of ways. such as : the liner of coal bunker of power station, the lining of dust cyclone, the liner of chemical storage tank and warehouse for corrosion material, the floor material for chemical plants and lowfriction vehicle testing surface etc
玄武巖鑄石板主要用於襯砌火電廠煤倉，各種規格旋風除塵器、旋流器、鋪設各類化工廠地面，汽車剎車試驗場地面等，也可用於襯砌酸洗槽或儲存腐蝕性物品的貯存室。 -
Pixel - counting measurement of cast iron surface plate ' s contiguous area
鑄鐵平板接觸點面積的像素檢測法 -
There exist two problems for brake rotors made of cast iron : overweight which affects dynamical properties of the train and excessively high temperature on friction surface during braking which deteriorates the mechanical properties of brake rotors
以往採用的鑄鐵盤存在兩大問題:簧下重量大，影響機車車輛的動力學性能;表面溫度較高，影響制動盤的機械性能。 -
The effect of compound casting technology and compound modification on the properties of high speed steel roll collar was studied. the results showed that compound high speed steel roll collar with high and even hardness and good bond between outer and inner layers could be gained when the modified colbalt free high speed steel in outer layer and nodular iron inner layer in connection with appropriate rotational speed of centrifugal machine, pertinent pouring interval between two kinds of the melt and moderate pouring temperature as well as surface induction heat treatment were chosen. it is indicated in industrial use that the service life of compound roll collar is higher by 5 times than that of high chromium cast iron collar
研究了離心復合鑄造工藝和復合變質處理對高速鋼輥環性能的影響，結果表明，選用變質高碳無鈷高速鋼作外層，用球鐵作內層，選擇合適的離心機轉速、兩種金屬熔液澆注間隔時間和澆注溫度，結合採用表面感應熱處理工藝，可獲得硬度高、均勻性好、內外層結合良好的高速鋼復合輥環，用於工業生產其使用壽命比高鉻鑄鐵輥環提高5倍以上。 -
Under function of impeller with high rotating speed, the used sand will be cast to the wearable junk ring to remove the inert film on surface of the sand via mutual collision and friction between sand and junk ring, impeller and case of machine, sand and sand
工作時舊砂在高速回轉的葉輪作用下，拋向耐磨襯圈，通過砂粒與襯圈葉輪與機盒砂粒與砂粒之間的相互碰撞和摩擦，去除砂粒表面的樹脂惰性膜。 -
The results show that, composite could be fabricated on the complicated surface by means of sodium silicate sand mold combination with vacuum infiltration process. when the substrate was 10 mm, composite layers reached 3 mm to 5 mm in thickness with high strength interface and less casting defect. microstructures of grey cast iron and low chromium cast iron matrix composites with various volume fraction has been analyzed
結果表明：用水玻璃砂型（芯）加負壓鑄滲的工藝能夠實現復雜表面（曲面）顆粒增強復合材料的制備，澆注方式簡單可靠，基材厚度在10mm時，復合層厚度能達到3 5mm ，且復合層鑄造缺陷少，復合效果好，界面緻密而且結合強度高。 -
Tests and production practice have proved that the surface shrinkages have been eliminated and cast quality significantly improved
試驗與實際生產結果表明：鑄件的表面縮孔徹底消除，鑄件質量大大提高。 -
The wearing resistance, microstructure, worn surface morphology and hardness change in wearing end - face and non - wearing end - face of cr - mn - cu alloy white cast iron were tested and analyzed
摘要對鉻錳銅合金白口鑄鐵的耐磨性、無磨損端面及磨損端面的微觀組織、磨損形貌及硬度進行了試驗和分析。 -
In the special fields locking valves, underground mining, water hydraulic systems or beyond that with mining machines, hydraulics, selector valves as well as with aggregates, open cast pit, strip mining, surface mining and / or with hydro and hydraulically is saartech hydraulik gmbh well - known
Saartech hydraulik gmbh是一家現代化的、可靠的專門產品供應商，這家供應商從事成套設備、機組，礦山機械，液壓系統，液壓，液壓動力源，液壓缸，醫藥技術，地下，地下開采，整流器、整流管、閥、閥門，截止閥、關閉閥，露天礦，水壓學、水壓技術、水壓系統，方向閥，換向閥，液壓的的製造、銷售。 -
Experienced in manufacturing process on die - cast / machining / stamping / injection / heat treatment / surface treatment etc. is preferred
熟悉零件製造加工過程（如壓鑄件，注塑件，沖壓件，機加工件，熱處理及表面處理等） 。 -
Abstract : this paper discussed the physicalmetallurgical process during laser hardening withsteel and cast iron, presented the technique designprinciple of laser hardening to achieve good resultsit also introduced the inspection method for laserhardened surface of steel and cast iron
文摘:討論了鋼和鑄鐵在激光表面淬硬時的物理冶金學過程，提出了激光淬硬獲得優良效果的工藝設計依據，介紹了對鋼鐵零件激光淬硬表層的檢驗方法。 -
With the correct compound designing, a composite layer with thickness of 1. 5to 6 millimeters was formed on the surface of casting by means of cast - sintering technique
通過合理的成分設計和工藝參數的優化選擇，利用鑄造燒結技術，在鑄鐵件表面獲得了一層厚為1 . 5 6mm的耐磨復合材料層。 -
Anqing diamond is well - equipped with alloy cast iron production line, ductile cast iron production line, stall band oil rings line and surface treatment line. our company has compound chrome plating, gas nit riding, salt nit riding, ceramics penetration, nana - meter technique, plasma spraying etc., advanced surface treatment and equipment. it is also equipped with light score analyzer, outline analyzer, pattern analyzer, metallograplry analyzer etc., and japanese germany examine instrument and technique
帝邁德公司裝備精良，現有高合金鑄鐵球墨鑄鐵毛坯鑄造和加工生產線，鋼帶組合油環生產線，表面處理生產線，車柴環生產線，擁有復合鍍氣體氮化鹽浴氮化滲陶納米技術噴鉬等高新表面處理裝備及技術，配備光譜分析儀輪廓儀投影儀金相分析儀等先進的德日檢測儀器和檢測設備。 -
Oxidation erosion, liquid aluminum erosion and the erosion mechanism of grey cast iron crucible for aluminum melting were described in detail. the methods such as alloying of as - cast surface for improving oxidation resistance of the grey cast iron crucible and both composition adjustment and infiltration protection for improving liquid aluminum erosion resistance of the crucible were introduced. the corrosion resistance and service life of grey cast iron crucible were improved effectively with these methods through decreasing various channels of erosion developing from the surface to the inner of crucible
詳細論述了熔鋁灰鐵坩堝的氧化腐蝕、鋁液腐蝕及其腐蝕機制，介紹了能夠提高灰鐵坩堝抗高溫氧化能力的鑄態表面合金化法和能夠提高灰鐵坩堝抗鋁液腐蝕能力的調整成分法與浸滲保護法，這些方法通過減少腐蝕由坩堝表面向基體內部發展的各種「通道」 ，有效地改善了灰鐵坩堝抗腐蝕性能，提高了坩堝使用壽命。 -
Abstract : oxidation erosion, liquid aluminum erosion and the erosion mechanism of grey cast iron crucible for aluminum melting were described in detail. the methods such as alloying of as - cast surface for improving oxidation resistance of the grey cast iron crucible and both composition adjustment and infiltration protection for improving liquid aluminum erosion resistance of the crucible were introduced. the corrosion resistance and service life of grey cast iron crucible were improved effectively with these methods through decreasing various channels of erosion developing from the surface to the inner of crucible
文摘:詳細論述了熔鋁灰鐵坩堝的氧化腐蝕、鋁液腐蝕及其腐蝕機制，介紹了能夠提高灰鐵坩堝抗高溫氧化能力的鑄態表面合金化法和能夠提高灰鐵坩堝抗鋁液腐蝕能力的調整成分法與浸滲保護法，這些方法通過減少腐蝕由坩堝表面向基體內部發展的各種「通道」 ，有效地改善了灰鐵坩堝抗腐蝕性能，提高了坩堝使用壽命。 -
Frequent temperature fluctuations expose the valve to excessive stresses which cause surface cracks in the body bores of cast steel valves
頻繁的溫度波動使閥門承受著過度的壓力，這種壓力容易造成鑄鋼閥門閥體孔內部表面裂縫。 -
Zinc cut wire, aluminium cut wire and copper cut wire are made of zinc wire, aluminium wire and copper wire respectively, widely used for shot peening to give compressive residual stress in the surface layer of components for fatigue life enhancement and suppression of stress corrosion cracking and deburring and cleaning of zinc or aluminum die cast parts, without any damage to the parts, and creating much less dust than natural and artificial corundum abrasives
鋅丸鋁丸鋅丸鋁丸分別由鋅絲鋁絲織成，廣泛用於鋅或鋁鑄件的去毛刺與清潔，對工件無損，比天然和人造氧化鋁磨料產生的粉塵少，壽命長，可回收再利用。 -
According to author ' s practical experience accumulated in many years of water project construction, the author gives brief description to some common quality defects in cast - in - site concrete construction, such as honeycomb, ballast - surface, holes, reinforcement emerging, crack, surface unevenness, insufficient strength etc
根據在水利水電工程施工中多年積累的實踐經驗，簡要闡述了現澆混凝土施工中常見的一些質量缺陷，如混凝土出現蜂窩、麻面、孔洞、露筋、裂縫、表面不平整、強度偏低等。 -
Sand and rusts removing of largesized cast iron, cast steel, steel surface treatment of oxidized workpieces
0大型鑄件、鑄鋼件、鋼結構件、大型鍛件、熱處理件的清砂、除銹去除氧化皮表面清理等。 -
Sand and removing of large - sized cast steel, steel structures, large - sized forging and surface of oxidized workpieces
大型鑄鐵、鑄鋼件、鋼結構件、大型鍛件、熱處理件的清砂、除銹去除氧化皮表面清理等。
分享友人