composite fiber 中文意思是什麼

composite fiber 解釋
復合材料纖維
  • composite : adj 1 併合的，復合的，混成的，合成的，集成的。2 【建築】混合式的；【造船】鐵骨木殼的。3 【植物；...
  • fiber : n. 〈美國〉 ＝ fibre。
  1. Taking the andalusite from south africa and alumina fiber as raw materials, adding aluminum sulphate as binder, fabrication and properties of alumina fiber reinforced andalusite composite was studied through wet dispersion, mould pressing and sintering processes

    以紅柱石和氧化鋁纖維為原料，用硫酸鋁作為結合劑，經過分散、混合、半干法成型、高溫燒成工藝，對氧化鋁纖維增強紅柱石基復合材料的制備及性能進行了研究。
  2. With the filling of diabase, the mechanical properties of the composite increased first and then decreased with a top tensile strength of 56. 5mpa and a top impact strength of 70. 1mpa. these illuminated that the diabase fiber reinforced pvc composites could be used as structure materials

    復合材料的力學性能隨著輝綠巖的增加先升后降，復合材料拉伸強度最高可達56 . 5mpa ，復合材料沖擊強度最高可達70 . 1mpa ，說明輝綠巖纖維增強pvc復合材料作結構材料使用。
  3. In the paper, the diabase fiber was also selected to reinforce pvc for the first time, which has high intensity, high rigidity and low cost, the diabase fiber was treated firstly, then during mixing, melting, pressing procedure, the diabase / pvc composite were prepared

    本文首次對高強度、高剛度、低成本的輝綠巖纖維增強pvc復合材料進行了研究。論文首先對輝綠巖纖維進行了表面改性，然後將改性后的輝綠巖纖維與pvc混煉、壓片制備了輝綠巖纖維pvc復合材料。
  4. The research work of this article is a part of the " reliability research of cylinders for compressed natural gas vehicles " project which was subsidized by chongqing scientific committee, it aims to research the destructive theory and design theory and method for fiber enlaced composite materials shell, and synthetically use finite element optimal technology to set up composite materials cad system

    本文的研究工作是重慶市科委資助項目「天然氣汽車氣瓶可靠性研究」的一部分，旨在研究纖維纏繞復合材料殼體設計理論及方法和破壞機理，綜合運用有限元優化技術建立復合材料殼體cad系統。
  5. Fiber enlaced composite materials is widely used in engineering project. the mechanics property of the shell is rather complicated when analyzing the affect of composite materials shell ' s interlaminar stresses. the result shows that the interlaminar stresses of composite materials shell will be changed much according to the change of the fiber direction, not only the distribution style, but also the interface which the maxinal interlaminar shearing stresses belongs to

    纖維纏繞復合材料殼體在工程實際中得到廣泛應用，其殼體力學性能相當復雜，本文在分析復合材料殼體層間應力的影響時，提出了復合材料殼體層間應力隨纖維方向的改變有較大的不同，不僅分佈形式不同，其最大層間剪應力所在的界面也各不相同。
  6. A ' method of analyzing the stresses of the lining of fiber enlaced composite cylindrical shell under internal pressure is raised through building the theory equation with putting the ring shaped stiffener on the point of enlancing fiber. the result is good fit with the traditional finite element analyzing system

    並結合對承受內壓的纖維纏繞復合材料圓柱殼進行了分析，通過建立理論方程提出了把加強環點建立在纖維纏繞處分析圓柱殼內襯應力應變的方法，計算結果與傳統有限元分析系統計算結果相吻合。
  7. It is expectative because of both its eminent performance and simple construction technology, and its economical preponderance. through the test of the six fibers and three gradations, the asphalt mixture of different combination, this paper analyses the fibers influence on the pavement performance, expatiates the strengthening mechanism of the fiber asphalt concrete pavement with theory of composite material and the interfacial chemistry

    本文通過六種纖維和三種礦料級配的瀝青混合料大量室內試驗研究，全面分析了纖維對瀝青混合料路用性能的影響，結合復合材料理論和界面化學知識，較系統的闡述了纖維對瀝青混合料路用性能的改善作用機理。
  8. Optical fiber composite overhead ground wires

    光纖復合架空地線
  9. Stress redistribution around a broken fiber in an intermingled hybrid composite sheet

    層內混雜復合材料斷裂纖附近的應力重分佈
  10. Firstly, the surface characteristic of polystyrene particle is changed from water detesting to water intimity by using special techniques and admixtures so mat the compound quality with inorganic materials is insured. secondly, the contradiction between the weight and strength is solved through optimizing the particle size and using composite fiber and the best heat conductivity is achieved under the condition that the necessary strength is met. in the research process, the author solved the problem of fiber dispersing in insulating materials so that the contraction of the material is controlled

    課題研究中，首先採用特殊的改性工藝及外加劑實現對聚苯乙烯顆粒表面的成功改性，使其表面由憎水轉化為完全親水，確保與無機材料的復合質量；其次，通過採用優化骨料級配及使用復合纖維等措施解決了保溫材料的輕質與強度的矛盾，使保溫材料在滿足必要的強度的前提下，導熱系數降至最小；並且，課題研究中成功解決了纖維在保溫材料中均勻分散的問題，達到了抑制保溫材料收縮的目的；最後，通過採用復合外加劑、合適的膠凝材料及合理的配比等措施確保該保溫材料具有良好的和易性，滿足施工的要求。
  11. The conclude is the comfortability of the elastic knitted fabric made of soybean protein composite fiber is better than that of cotton, which make the soybean protein composite fiber suitable for knitted underwear

    認為大豆蛋白彈性針織物的服用舒適性能良好，其優良的接觸舒適性和熱濕舒適性都在一定程度上好於棉針織物，是加工貼身針織內衣的理想面料。
  12. The physical properties of the knitted fabric made of soybean protein composite fiber and cotton are tested, wear comparison testing on knitted underwear is made, and the wear comfortability of the two kinds of fabric is evaluated

    摘要測試了大豆蛋白復合纖維針織物與棉針織物物理性能，同時對其針織內衣進行了穿著對比實驗，並主觀評價了兩種面料的穿著舒適性能。
  13. Opgw standard construction of composite fiber optic groundwire for use on electric utility power lines

    電氣公用設施電力線用復合光纖接地線
  14. Alkali deweighting treatment of sea - island composite fiber nonwoven

    定島海島纖維非織造基布的堿減量處理工藝
  15. 406 is non - asbestos clutch facing which adopts refined glass fiber, high - temperature resistance composite fiber materials, high quality metals such as soft copper and so on, uses imported wear and lubrication materials, high grade heat resistance resin binder through special process

    406無石棉離合器面片，採用精製玻纖，耐高溫復合化纖材料，優質軟金屬銅等，選用進口耐磨材料，潤滑材料，高檔耐溫樹脂經過特殊工藝復合粘結而成
  16. 405 is non - asbestos clutch facing which adopts refined glass fiber, high - temperature resistance composite fiber materials, high quality metals such as soft copper and so on, uses imported wear and lubrication materials, high grade heat resistance resin binder through special process

    405無石棉離合器面片，採用精製玻纖，耐高溫復合化纖材料，優質軟金屬銅等，選用進口耐磨材料，潤滑材料，高檔耐溫樹脂經過特殊工藝復合粘結而成
  17. Construction of composite fiber optic overhead ground wire for use on electric utility power lines

    用於電氣設備電線的架空復合光釬線纜的建造
  18. Research progress in photo - degradation resistance and durable antimicrobial property of nano - crystalline tio2 composite fiber fabric

    納米二氧化鈦復合纖維織物的抗光降解及耐久抗菌研究進展
  19. Experimental study on reinforced concrete extended beam strengthened with composite fiber reinforced polymer

    復合纖維抗彎加固混凝土外伸梁試驗研究
  20. The influence of the content of ha, molecular weight of pdlla and the diameter of fibers on the mechanical properties of pdlla / ha composite fiber had been studied through mechanical tests

    對纖維的力學性能進行測試，研究了ha的含量、 pdlla的分子量、纖維的直徑以及加工成型的溫度等對pdlla ha復合纖維力學性能的影響規律。
分享友人
分享到 Line

分享到臉書