control cylinder 中文意思是什麼
control cylinder
解釋
調節筒-
The machine is circumgyration drilling machine that the rotary drives drilling tool to bore by rotation, adopts full hydraulic pressure drive, constant power loop, wheel cylinder startup, oil cylinder disappear ing end bumper, electrohydraulic combined control, steel wheel traveling and disassembly transport
該機是由轉盤帶動鉆具旋轉鉆進的回轉鉆機，採用全液壓驅動，恆功率迴路，分泵啟動，油缸升降，電液復合操縱，鋼輪行走，解體運輸。 -
Then following reality constituent of engine and connecting component interface, a nonlinear signal cylinder engine model has been created, though fire interval and fire order, a control - oriented four cylinders engine is build. following dynamometer is seen as load, performance of engine is simulated and researched under the condition of constant torque and speed, validation of the math and simulation model have been confirmed by comparison result between simulation with test result of engine performance simulation software dyno
按照發動機的實際組成，根據各部件的介面類型連接模型庫中的部件，建立了單缸發動機非線性模型，在此基礎上，依據發動機實際發火間隔和順序，建立了面向控制的四缸汽油機模型，並以測功器為負載，通過恆轉矩和恆轉速方式進行了發動機性能模擬和研究，模擬結果和發動機動力性能模擬軟體dyno測試結果的對比驗證了數學模型和模擬模型的正確性。 -
Hydraulic control system of double - cylinder vessel gate is a sort of typical electrohydraulic proportional control system0 in order to study electrohydraulic flux control characteristics of this system, i have analyzed the principle of this hydraulic control system, and made its mathematics model ? in double - cylinder hydraulic system, it is necessary to process electric synchronous control in this hydraulic system, this paper also introduces a sort of fnn ameliorated from the point of view of intelligent control theory, and clarifies the principle of applying that network to achieve synchronous controlo at the same time, the means of fuzzy configuration analysis is used for network training, the comparative experiments make known that the method of applying fnn to realize synchronization control is feasible, furthermore, its effect is better than others0 this paper puts forward that a distributed control system can be used to monitor and control vessel gate within a real - time or remote distance, the basic project, structure, applications and functions of computerized scada system in hydraulic system of vessel gate is introduced ? a double layer network structure, epigynous and hypogynous machine network, is applied to this system, in accord with the application of technique such as plc, integrated software etc, this paper introduces the methods and application to achieve the computerized scada system in the task, and analyzes the characteristic of this system, in this paper, the application of configuration in monitor and control system of vessel gate is discussedo in addition, in accord with the application of technique such as visual basicb
雙缸船閘液壓啟閉控制系統要求解決同步控制問題，文中從智能控制理論角度出發，採用了一種改進的模糊神經網路，結合模糊聚類分析方法，闡述了應用該網路實現同步控制的原理。通過對比模擬實驗表明：應用模糊補經網路實現同步控制是可行的，而且它的同步控制效果要優于傳統的設置主從令缸控制方法，具有良好的魯棒性能。另外，本文提出了建立船閘控制系統的分散式控制系統，介紹了船閘液壓控制系統的計算機監控系統（ scada ）的方案、結構、應用和主要功能，採用雙層網路化結構：上位機網路和下位機網路，並結合plc通信網路技術和組態軟體等技術構成的計算機監控系統的實現方法，實際應用，分析了這種較新的系統模式在船閘液壓控制系統的計算機監控系統的功能實現中所具有的特點。 -
In the hardware design, the paper completes modules ’ design like outside memory, patulous a / d, patulous d / a, rs232 communication, ecan communication, led control, keyboard control, distant control, emulation, reset, logic voltage switch, dsp supply power regulate and ac - dc power circuit, as well as room layout design like anterior panel, back panel etc. and dsp transfers data with peripheral equipments except outside memory using serial ports. besides, the whole circuit is configured in interrupt response. thus, it can meet system demand as well as take full advantage of tms320f2812 ’ s hardware resource. in the software design, the paper finishs programs like the interface programms intercommunicates with people, the distant control program, ad and da modules ’ control program, in addition, the paper select the velocity and acceleration state - feedback algorithm and is written in the program. the software design uses dsp integrate exploiting environment named ccs2. 2 of ti inc. as software instrument, and programs with the combination of c language and assembly language. moreover, in order to maintenance or modify the software expediently and shorten software ’ s exploitation time, the design adopt software modularization technique. finally, some air cylinder experiments are carried out to proved that the pneumatic controller is very practical
在硬體設計中，本文完成了片外存儲器擴展、 a / d擴展、 d / a擴展、 rs232通信介面、 ecan通信總線介面、液晶顯示控制、鍵盤控制、遠程控制、模擬、復位、邏輯電平轉換、 dsp工作電源校正電路和ac - dc電源等模塊設計以及控制器前面板、後面板等的空間布局設計。其中dsp與除外部存儲器的外圍設備之間的數據傳送全部採用串口通信，同時系統電路配置成中斷響應方式，這樣既滿足了系統要求，又充分利用了tms320f2812的硬體資源。在軟體設計中，本文完成了人機界面功能模塊、遠程控制模塊、 ad擴展模塊、 da擴展模塊、速度和加速度狀態反饋的控制演算法的程序設計。 -
Frequency conversion control for beater in the fermentation cylinder of terramycin
土霉素發酵罐攪拌器的變頻調速控制 -
Abstract : the mathematical model of the valve controlled asymmetrical cylinder active electro - hydraulic servo loading system is set up and the control strategy of the compound adjustment is designed in this paper. the simulation and experimantal research are carried out
文摘:建立了閥控非對稱缸主動式電液伺服加載系統的數學模型，設計了復合校正的控制策略，並作了模擬和實驗研究。 -
Through consulting lots of relevant references, present research of direct drive volume control hydraulic servo system is summarized in this paper, the principle and character of this system are expatiated, the principle of vector control is introduced. at the same time, the mathematical model of ac asynchronous motor is set up based on the vector control theory. the mathematical models of both the pump controlled motor and pump controlled cylinder are set up and simulated in this paper
在查閱大量國內外相關文獻的基礎上，本文綜述了國內外對該系統研究概況，闡述了該類系統原理和特點;闡述了矢量控制的基本原理，並基於這一原理建立交流異步電動機的數學模型;分別建立了泵控馬達系統和泵控缸系統的數學模型，並給出了模擬分析;設計了用於泵控馬達系統的集成閥塊，加工了密閉壓力油罐;針對現有直驅式電液伺服裝置所存在的問題，本文主要針對系統工作過程中所產生的噪音與爬行問題進行了一定的研究。 -
Single er valve ' s control equation is derived two mathematic models of er valve - cylinder actuator is constructed according to control methods of er valve - cylinder. and a position control system based on er valve - bridge actuator is simulated. the result shows that the system has good dynamic performance
根據電流變閥對液壓缸的控制方式，建立了兩種由電流變閥控制液壓缸組成的電流變閥控系統動力元件的數學模型，並對電流變閥橋路結構式的動力元件組成的閥控位置系統進行了模擬。 -
Experimental study on a knock control system for gasoline engine based on the detection of cylinder pressure wave
基於缸內壓力波檢測的汽油機爆震控制系統 -
Additionally, rushing - board brake is parallel - adjusted so that its very convenient for users to adjust it. iii. j53 - 630c model is improved on base of j53 - 630b model, retaining advantages of j53 - 630b model such as air cylinder control, steel structure platform, rushing - board brake and integrated pre - stressing force machine frame
三j53 - 630c型在j53 - 630b型的基礎上的改進型，保留了j53 - 630b型產品的優點，氣缸操縱，剛結構式平臺，推板式剎車整體預應力機架。 -
When the governing valve was series - connected on the return oil - line in the metering - out control system, under the same flow area and the same adjusted pressure of relief valve, with the incremental quantity of step load, the pressure highly - adjusted capacity of the hydraulic cylinder chamber with piston - rod increased, meanwhile, it ' s time of rise, time to peak and the governing time all increased. at the same time, the pressure highly - adjusted capacity of the hydraulic cylinder chamber without piston - rod increased
當出口節流調速系統的回油路上串接調速閥時，隨階躍負載的增加，在相同流量閥開度、相同溢流閥調節壓力的情況下，液壓缸有桿腔壓力p _ 2 （ t ）的超調量是增加的，上升時間、峰值時間以及調整時間也是增加的；液壓缸無桿腔壓力p _ 1 （ t ）的超調量是增加的。 -
It is suited for electric heater, cylinder washer, frying - pan electric oven and other household electric appliances as electric - thermal control and overheat protection
適用於電熱水器、電開水器、洗衣機、電烤箱、油炸鍋等家用電器類的電熱控制超溫保護。 -
( 4 ) in order to improve the system and its working function, a hydraulic controlled direction valve is connected in the main oil circuit to control the differential of the piston. then the dimentions of the cylinder and the piston are reduced, improving the working properties
廣東工業人學工學顧十學位論義（ 4 ）為進一步改進設計方案，提高其工作性能，在主油路中加一液動換向閥，控制活塞的差動，從而將減小油缸和活塞的尺寸，提高工作性能。 -
For these reasons, we can apply the theory of the model reference self - adaptive control syetem design based on the theorem of balance point stabilization in the force system of asymmetric cylinder controlled by symmetric valve. the main idea of model reference self - adaptive controller is to make the self - adaptive control error incline to zero as time passed. the task to design adaptive controller is to find the control input that can make the output of the controlled system to follow that of the reference model
因此將基於平衡點穩定定理的模型參考自適應控制系統設計理論應用於閥控非對稱缸力系統中，其基本原理是使自適應控制誤差隨時間的推移而趨向于零，自適應控制器設計的目的是尋找使被控系統的輸出漸近一致的跟隨參考模型的輸出的控制輸入，以此來改善被控系統的性能。 -
According to the control rod hydraulic drive mechanism ( crhdm ) and the characteristics of its hydraulic cylinder seal structure, the leaking ways of the hydraulic cylinder piston ring seal were analysed, its theoretical calculation model was built and its flow resistance formula based on the calculation model of differential pressure at the hydraulic cylinder piston ring seal was deduced
摘要根據控制棒水壓驅動機構水壓缸活塞環密封結構的特點，分析了水壓缸活塞環的泄漏途徑，建立了活塞環密封泄漏流阻的理論計算模型，並結合水壓缸活塞環密封處的壓差計算模型，推導出水壓缸密封結構的流阻計算公式。 -
Design and study on precision measure - control system for chromium electroplating thickness of cylinder liner abrasion
汽缸套電鍍鉻厚度精密測控系統設計 -
Mechanical impact dynamics is used to analyse the production and spread of stress wave when hydraulic pile hammer hammerblows piles, the stress wave influence the course of driving pile. slender hammer that is equal to wave resistance of the pile can bring ideal stress waveform. when the hammer weight is constant, efficiency of driving pile can be increased by means of selecting drive cap and cushion pad of different rigidity to match the hammer according to various geological condition and the pile. the structure and principium of hydraulic system of double - acting hydraulic pile hammer with double cylinders is studied in detail in the paper, the hydraulic system and electric control system of six - ton - double - actin hydraulic pile hammer with double cylinder is designed on the basis of it
本文應用沖擊機械繫統動力學分析打樁過程中錘體與樁撞擊時應力波的產生、傳播以及該波對沉樁過程的影響。認為與樁等波阻的細長狀錘體能夠產生理想的應力波波形；在樁錘重量一定的情況下，可針對不同的地質情況和樁，通過選擇不同剛度的樁帽和樁墊與其匹配來提高打樁效率。本文對雙缸雙作用液壓打樁錘液壓系統的結構和工作原理進行了深入的研究，並在此基礎上設計出六噸雙缸雙作用液壓打樁錘的液壓系統和電控系統。 -
Especially applying hinge - based dual - cylinder control system to hauling ensures that the pressure imposed to the products is even and uniform so as to guarantee more stable hauling performance. it is widely used in the fields of architecture, traffic, and furniture, especially, in the production of hard pvc, pe, pp, ps, abs irregular materials products used in windows and doors
本公司生產的高透光性高強度的聚碳酸脂管，亦稱pc管，廣泛用燈飾特別是豪華燈飾橋頭燈飾霓虹燈水族燈等，同時適用於離子交換柱液位器醫療器械高奪電絕緣配件實驗室儀器化工管道等等。 -
Electromagnetic control to cylinder wake
圓柱繞流的電磁控制 -
Kone technology, original european hydraulic cylinder, pumping station and control system, ensure superior quality, high reliability and longtime life of our products. multi - type operation modes such as single - cylinder and double - cylinder in 1 : 1, 2 : 1, 4 : 2 ratio instead of traditional mrl solutions can save building space and construction costs and serve in over - loading vertical transportation locations
引進通力技術，原裝進口歐洲全套液壓油缸泵站和控制系統，保證了產品品質可靠性和長使用壽命單缸雙缸1 ： 1 2 ： 1 4 ： 2等多種經典結構，是傳統的無機房解決方案，可減少建築空間降低建築造價，能勝任各種重載大噸位垂直運輸場合。
分享友人