end rotation 中文意思是什麼

end rotation 解釋
端旋
  • end : n 1 端，尖，末端，終點。2 邊緣；極點，極限。3 結局，結果。4 目的。5 最後，死。6 【紡織；印染】經...
  • rotation : n. 1. 旋轉；輪轉；循環。2. 【天文學】自轉。3. 【物理學】旋度。4. 輪流，輪換；交替。5. 【農業】輪作；【林業】輪伐（期）。
  1. The machine is circumgyration drilling machine that the rotary drives drilling tool to bore by rotation, adopts full hydraulic pressure drive, constant power loop, wheel cylinder startup, oil cylinder disappear ing end bumper, electrohydraulic combined control, steel wheel traveling and disassembly transport

    該機是由轉盤帶動鉆具旋轉鉆進的回轉鉆機，採用全液壓驅動，恆功率迴路，分泵啟動，油缸升降，電液復合操縱，鋼輪行走，解體運輸。
  2. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained, free 3600 or 100 rotation is allowed for grinding end mills 、 twist drill 、 lathe tools, only replace the attachment to the index head without any complex setup

    磨削分度頭可在24種位置下操作以便於磨削任何角度和形狀，只需替換分度頭上的附件而不需任何復雜的步驟就可進行立銑刀、鉆頭、車刀的磨削。
  3. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  4. Equipped with electronic controller fini tronic and preset for remote control for two or more compressors. it offers working pressure and oil mist separator tank inner pressure indication, separator filter clogging lashing alarm before overpressure e - stop, electric motor temperature control, maximum screw assembly temperature control, air temperature on pressure end indication, electric motor direction of rotation check, time to scheduled maintenance term, total operating hours and operating hours under load, alarm log of last five failure events

    並預設為丙臺以上空壓機聯機遠程控制，有工作壓力和油氣分離器罐內壓指示，分離器過濾器阻塞報警，電機溫控，螺桿總成溫控，壓力端空氣溫度指示，電機轉向檢查，維護周期油，油過濾器，空氣過濾器，分離器過濾器，總運行時間和負載運行時間，記錄上五個報警故障等。
  5. Thus it is necessary to study moment resistance, rotation stiffness and rotation capacity of the joints. in this paper, six specimens on end - plate composite beam - to - column joints and two specimens on end - plate composite beam - to - column joints were designed to subject to static load. the factors of m - characteristics about semi - rigid composite joints, including bolts, profiled steel sheeting, beam, column, stiffen rib and reinforcement, are studied

    本文設計了6個端板型鋼-混凝土組合樑柱節點與2個端板型純鋼樑柱節點，通過對這些試件的靜力荷載試驗，重點研究了端板型鋼-混凝土組合節點的彎矩-轉角性能的影響因素，包括高強螺栓、壓型鋼板、型鋼梁、型鋼柱、加勁肋，以及混凝土板內縱向鋼筋配筋率等。
  6. With the successfully biding of core inserting pulling mechanisms and threading rotation ejection mechanisms supported by nation innovation financial and the approval of establishing large injection forming molds project technology r d center, jinsu company is gradually switch the center of industry structure to produce high precision and automatism high - end molds, and the base point that supports the new development is gradually emerged. i believe in 2007 jinsu will make great progress

    隨著公司「模具開合模抽插芯與螺紋轉動脫模同步機構」的通過論證與國家創新基金項目的獲得與支持，金塑公司在2006年正在逐步地把產業結構重心轉移到生產高精度全自動的新型模具方向上來，支撐新一輪快速發展的基點正在逐步形成，我相信在2007年金塑公司必定會乘風破浪更上一層樓。
  7. This mechanism generates the linear motion from the rotation from the input end ( the lever at the bottom ), and path of the process can also be changed by clutched

    此機構的目的是靠輸入端的圓周運動產生輸出端（下方直桿）的直線運動靠著換檔的動作可以改變直線運動的行程。
  8. Metal - cutting tools ; milling cutters, rotation, flute direction, end thrust

    金屬切削刀具.順排屑槽方向旋轉軸向推力的銑刀
  9. Secondly, the new physical intuition into reduced manipulability is given by means of decomposing reduced manipulability into arm length index and rotation angle index. the center index that expresses the positional relation between fault tolerant workspace and end - effector ' s motion is proposed

    其次，通過將退化可操作度分解為臂長和轉角兩種指標，賦予退化可操作度新的物理解釋，進而提出反映容錯空間和末端軌跡相對位置的中心度指標。
  10. Tokyo, nov 8 ( reuters ) - japan ' s football association has decided to set up a committee to look into the possibility of bidding for the 2018 world cup following fifa ' s decision to end its continental rotation policy, local media said on thursday

    東京， 11月8日（路透社） ? ?當地媒體報道日本足協決定成立一個委員會來探討申辦2018年世界盃的可能性，國際足聯已經決定終止各大洲輪流申辦的政策。
  11. Pump is driven by a motor through motor coupling. viewed from the driving end, pump makes clockwise rotation

    通過電機聯軸器，由電機驅動泵，從傳動端看，泵為順時針方向旋轉。
  12. For greatly overcoming the carrier phase rotation resulting from multipath underwater acoustic channel and large mean square error ( mse ) at convergent end of linear equalizer ( le ) based on higher order statistics, statistical equalization criterion based blind linear sign decision feedback equalizer ( lsdfe ) was proposed

    摘要為了克服多途水聲通道引起信號的相位旋轉及基於高階統計量的線性均衡器（ le ）收斂后均方誤差大的不足，提出了基於統計特性均衡準則的線性符號判決反饋盲均衡演算法。
  13. Some problems from the principal stress axis rotation experiment with hollow cylinder apparatus are analyzed in detail herein ; which consists of three aspects, such as the preparation of the hollow cylinder sample and the acquisition of the isotropic one ; the estimation and elimination of the size effect and the end effect in the experiment ; and the membrane penetration effect on both the drained and the undrained tests results, etc

    摘要詳細分析了採用空心圓柱儀進行主應力軸旋轉試驗遇到的若干問題，主要包括三個方面：空心圓柱試樣制備及各向同性試樣的獲得；試驗中尺寸效應、端部效應的考慮與消除；空心試樣膜嵌入效應對排水、不排水試驗結果的影響等。
  14. Steel frame with welding joint easily occur brittle collapse because of having a low ductility at joints then ， a semi - rigid connected steel frame has large the energy absorption capacity which can resist dynamic loads and the using steel qualities of bracing system and joints are small so adopting a semi - rigid jointed steel frame is economical and stable but for semi - rigid connections are complex and variable ， in conventional analysis and design of steel structures ， it is usually assumed that the connections between columns and beams are either rigid or pinned the analysis of steel frames adopting the assumption can simplify the procedure of analysis and design ， but cannot precisely reflect structural practical circumstance and the errors of calculating results are large ， even ， get incorrect conclusions semi - rigid connection was referred to in chinese code for design of steel structures ( 2001 ， 10 ) ， however ， it isn ’ t specified how to apply semi - rigid joints in design in fact it cannot be carry out the purpose of the paper give a calculating method that accords practical engineering and easily put into effect worthwhile it is going to promote the development of semi - rigid jointed steel frame in design and heighten structural stability in the paper ， at first some commonly employed methods for the modeling of connection behavior are introduced richard abbott function modeling of connection is adopted for extended end plate bolted connection by the 34 test data comparing to regression analysis indicate richard - abbott function modeling of connection represents an excellent fit to test data then after a semi - rigid joint behavior can be modeled as a finite stiffness rotation spring ， base on rotation and displacement equation derive the element stiffness matrixes with semi - rigid connections where the effects ofj ointed flexibility geometric non - linearity and shear forces in the connection deformations have been considered in and fixed - end forces are modified finally, a program for calculating semi - rigid with incremental - iterative method has been

    本文的目的就是為半剛性連接鋼框架的設計提供一種既符合工程實際又簡便易行的計算方法，供規范使用過程的補充、延伸或參考；同時，也將促進半剛性連接鋼框架設計技術的發展，為提高結構安全性能、節省工程成本發揮應有的作用。本文首先介紹了常見的幾種應用較為廣泛的樑柱連接彎矩轉角關系模型，在分析比較的基礎上，選用richard ? abbott函數模型作為外伸端板連接彎矩轉角關系模型，通過對34個外伸端板連接的實驗數據與回歸分析得到的參數比較可知，經回歸分析得到的此模型參數與實驗數據符合較好。然後用彈簧表徵連接點的轉動剛度，根據梁的轉角位移方程推導出半剛性連接的剛度矩陣，在單元剛度矩陣中考慮了節點柔性、幾何非線性和剪切變形的影響，並對固端力進行了修正，最後用增量迭代法編制有限元程序進行計算和分析。
  15. Then a semi - rigid joint behavior can be modeled as a finite stiffness rotation spring. basing on rotation and displacement equation, we obtain the element stiffness matrixes with semi - rigid connections where the effects of material nonlinear, hysteresis behavior and shear forces in the connection deformations have been considered in and at the same time we modify the fixed - end forces. finally, a program for calculating the elastic - plastic earthquake seismic of semi - rigid connected steel frame structure by step and step integration of wilson -

    本文在介紹和分析半剛性連接彎矩與轉角連接關系模型的基礎上，用帶有轉動剛度的彈簧表徵半剛性連接，推導出半剛性連接的剛度矩陣，並對桿件固端力進行修正，同時在考慮剪切變形、材料彈塑性、及構件的動力滯回性能的基礎上，編制了結構彈塑性地震動力時程分析有限元計算程序。
  16. Then after a semi - rigid joint behavior can be modeled as a finite stiffness rotation spring, base on rotation and displacement equation derive the element stiffness matrixes with semi - rigid connections where the effects of jointed flexibility and shear forces in the connection deformations have been considered in and fixed - end forces are modified. finally, a program for calculating system reliability of semi - ridge steel frames with monte carlo method and finite element analysis has compiled for calculating and analyzing. by calculating results of several examples for steel frame in semi - rigid joints case show the change of joint stiffness and other kinds of factors affect the system

    接著本文在介紹和分析半剛性連接彎矩和轉角關系模型的基礎上，用帶有轉動剛度的彈簧表徵半剛性連接，推導出半剛性連接的剛度矩陣，對固端力進行修正，同時考慮了剪切變形的影響，編制了半剛接鋼結構平面框架的有限元程序bhpfl ，並在其基礎上編制了基於蒙特卡洛法的montecarlo - bhpfl有限元相結合的方法，進行體系可靠度的分析。
  17. Bar - end rotation stiffness of continuous beam and its application in moment distribution method

    連續梁的桿端轉動剛度及其在力矩分配法中的應用
  18. Rotation direction : clockwise rotation viewed from motor end

    泵的旋轉方向：由電動機方向往泵看為順時針方向旋轉
  19. Rotating around one axis does not reorient the other axes, and you can end up in a situation where two axes cancel eachother out, making it look as if one of the rotation axes is " broken "

    繞著一個軸旋轉不能夠再適應其它的軸，你可以在一個位置停止，在那裡兩個軸（的作用）相互抵消掉了，那看起來就好像其中一個個軸斷了一樣。
  20. The universal index1 head is provided at 24 positions so that any particular angle of shape can be obtained, free 3600 or 100 rotation is allowed for grinding end mills 、 twist drill 、 lathe tools, only replace the attachment to the index1 head without any complex setup

    磨削分度頭可在24種位置下操作以便於磨削任何角度和形狀，只需替換分度頭上的附件而不需任何復雜的步驟就可進行立銑刀、鉆頭、車刀.球形面的磨削。
分享友人
分享到 Line

分享到臉書