normal loading 中文意思是什麼
normal loading
解釋
標準載荷-
Bridge engineering is important throat part in highways and railroads. it is critical to ensure its loading ability and normal function for smooth moving in a whole line
橋梁工程是公路和鐵路的重要咽喉部位，確保其承載能力和正常使用性能是全線運行暢通的關鍵。 -
The method for measuring the plane strain fracture toughness klc has been introduce to high polymer bonded explosives ( pbx ) by systematically studying technologies concerning the shape of specimen, the depth and its machining of crack, the loading rate, the measurement of critical fracture load, and the computation of klc, etc. the method has been used to test and study klc of three typical high polymer bonded explosives which are j2, jl, j3 respectively both at normal temperature and unmoral temperature
本文以高聚物粘結炸藥為研究對象，對測試高聚物粘結炸藥的平面應變斷裂韌度所涉及的樣品形狀、裂紋深度及裂紋制備、加載速度、臨界斷裂載荷p _ q的確定及平面應變斷裂韌度k _ （ ic ）的計算等方面進行深入研究，建立了較為完善的炸藥平面應變斷裂韌度測試方法。 -
In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented
本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。 -
Method : dividing 90 kunming mice to 3 groups, observing the index of weight loading swimming test, bearing hypoxia at normal pressure, activity of lactic dehydrogenase
方法: 90隻雄性昆明種小鼠分為3組，觀察艾灸后小鼠的負重遊泳試驗、常壓耐缺氧時間、乳酸脫氫酶活力等指標。 -
Result : moxibustion had the function of reinforcing weight loading swimming ability and activity of lactic dehydrogenase and lengthening the time of bearing hypoxia at normal pressure
結果:艾灸能有效地提高小鼠的負重遊泳能力和常壓耐缺氧的時間，並可增強乳酸脫氫酶的活力。 -
Licensed imports shall not be refused for minor variations in value, quantity or weight from the amount designated on the licence due to differences occurring during shipment, differences incidental to bulk loading and other minor differences consistent with normal commercial practice
得到許可的進口產品不得由於運輸過程中產生的差異、散裝貨裝載時偶然產生的差異以及其他與正常商業做法一致的微小差異而導致貨物的價值、數量或重量與許可證標明的數額有微小差異而被拒絕。 -
At this point it was necessary to evaluate the normal pattern of loading to be applied to the model for different angles of incidence of the wind.
這里，必須評定在風的不同入射角時施加於模型的荷載的正常型態。 -
Normal loading condition
正常荷載條件 -
Based on the static loading test and stress testing of piles in situ of the project " taiyuan second long - distance telegraphic hinge ", some researches below have been conducted in this paper. the paper consists of the following two parts : the comparisons of load transfer feature of the resistance among the four types of piles ( that is, the normal cast - in - situ pile, the cast - in - situ pile with post - pressure grouting, the cast - in - situ pile with expanded - base, the cast - in - situ pile with expanded - base and post - pressure grouting ), the bearing capacity of piles affected respectively by the two types of construction technique
本文結合某工程的樁基現場靜載荷試驗和樁身應力測試試驗，對比、研究了同一場地中相同樁長的普通灌注直樁、后注漿灌注直樁、擴底灌注樁和擴底后注漿灌注樁四種樁型的承載力特性、樁身軸力和樁側摩阻力的分佈特性，闡述了擴底后注漿樁的樁身軸力傳遞規律和側阻力發揮性狀，分析了擴底、后注漿兩種施工工藝對試樁單樁承載力的影響。 -
Sem investigation shows that all the crack initiations can be traced back to the lateral sides of the sample, and the crack propagates along the direction normal to the loading axis
Zr一4合金的低周疲勞斷口上，所有裂紋都起源於試樣最窄處的側表面，並逐漸向內部擴展。 -
This dissertation generalizes the test on the full - scale reinforced concrete simply - supported slabs and three - span continuous slabs under fire at the normal loading condition. the conclusion can be drawn from the test about the deformation of the both kinds of slabs and the specimen section temperature distribution. meanwhile, the failure modes, mechanism and internal force redistribution of the continuous slabs are analyzed
本文對足尺鋼筋混凝土簡支板、三跨連續板進行了恆載下的受火試驗研究，通過試驗，給出了鋼筋混凝土簡支板和連續板在高溫下的變形、構件截面溫度分佈規律；分析了連續板的內力重分佈和破壞機構的特點。 -
Six circular concrete columns were tested under concentric loading, to investigate the confinement effect of confining reinforcement in both normal strength and high strength concrete columns. test results were analyzed and compared. practical formulas were proposed for the minimum volumetric ratio and the spacing of the stirrups
通過對6根圓柱體混凝土柱的軸壓試驗，研究普通混凝土及高強混凝土在箍筋作用下的約束效應，並將試驗結果進行分析比較，提出了配箍率及箍筋間距實用計算公式。 -
As soon as the normal section cracks, the crack firstly appears in the flexural region. at this moment, the load - deflection curve has a turning point. with the increase of the load, the rigidity of the beam decreases compared with that before cracking because of the development of cracks in flexural region, and the formation and development of diagonal cracks toward the loading point, the load - deflection curve is basically linear till the beam fails
正截面開裂前，荷載撓度曲線基本為線性，截面剛度較大；正截面開裂時，裂縫先在純彎段出現，荷載撓度曲線出現轉折點，隨著荷載的增加，純彎段正裂縫的發展以及剪跨段斜裂縫的產生並向梁的受壓區加荷點發展，使梁的剛度較截面開裂前減少，荷載撓度曲線也基本為線性直到梁破壞。 -
Consequencely, the analysis and assessment system of the operating state of the concrete dam was developed under the ansys development environment, and the back - analysis and the prediction of the parameters of the dam system have been done according to the operating observed data. the research work involves several aspects as follows : 1 ) a back - analysis model including the prior information and a predictive model of nonlinear time series were established ; 2 ) the analysis and assessment system of the operating state of the concrete dam was developed under the ansys development environment, in which the analysis module of the loading effects, the back - analysis module, the forecasting module of the physical parameters and the assessment module of the operating state were contained ; 3 ) according to the operating observed data, the operating state of the dam was assessed and predicted with the analysis system of the operating state, the results suggested that the dam is in basically normal operation at present
具體工作有以下幾方面： 1 ）收集整理漫灣水電站大壩運行監測資料，並對其進行了系統分析，從觀測資料本身直觀的分析了大壩的運行狀況； 2 ）總結位移反分析的理論及方法，建立了考慮先驗信息多介質位移反分析模型，基於神經網路非線性映射功能，建立了神經網路時間序列預測模型； 3 ）以ansys軟體為平臺，開發了漫灣水電站砼重力壩運行狀態評價模塊，結合荷載效應分析、參數反演分析、參數預測分析三個模塊組成漫灣水電站砼重力壩運行狀態分析系統；實現了對漫灣水電站運行狀態的動態「反演-預測」分析； 4 ）利用漫灣水電站砼重力壩運行狀態分析系統，在漫灣大壩實測資料分析、大壩砼特性參數反分析、大壩砼彈性模量衰變規律及預測分析的基礎上，系統的分析並預測了大壩運行狀態。 -
With the different loading ratio of parallel to axis and normal to axis direction, damage defects will occur bulking problem. by varying the degree of material anisotropy relative to the loading axis such as poisson ' s ratio and shear modulus, crack growth bulking strain value parallel to or normal to the loading axis is different. the parameters controlling the growth or arrest of the delamination damage are identified as the geometry and the depth of defects and radius of cylindrical etc. at last, it was investigated that the delamination damage is often induced by the tip of matrix damage under higher stress
研究結果表明:殼體筒段受軸向拉伸和內壓載荷作用時，軸向和環向載荷的比率不同，母層和子層可能發生拉伸屈曲，也可能發生收縮屈曲，或者同時發生拉伸和壓縮屈曲;母層與子層各向異性存在差異，即泊松比與剪切模量不匹配時，將使子層板的邊界上承受壓縮和剪切作用，當分層達到臨界狀態則發生屈曲，當母層與子層的各向異性差異越大，則發生分層屈曲的可能性越大;分層損傷的屈曲應變值與子層自身的彈性模量、分層子層的形狀、厚度以及圓柱半徑等因素有關。 -
It is the researchful purpose of this paper that the methods of appraising the existing structural reliability basing on own information are found, which will impel the methods of appraising the existing structural develop from applied methods to probability methods. the contents of this paper have mainly four, including : firstly, the normal value of permanent load in the existing structure is ascertained by the way that is called bayes - small capacity, which considers the dates of design and the road - test dates. secondly, by introducing the random variable that is statistical ambiguity, the statistics of loading and resistance of existing structure are researched
本文研究目的是針對現有結構的特點，建立基於自身信息的現有結構可靠性的實用評定方法，推動我國的現有結構可靠性鑒定方法由實用鑒定法向概率鑒定法發展，主要研究內容包括四個方面：一、結合結構原設計數據和現場抽樣實測數據，研究了恆載標準值的統計推斷方法，提出bayes小樣本統計推斷方法；二、利用統計不定性隨機變量，結合現有結構的特點，提出荷載、抗力變異性的小樣本統計推斷方法；三、分析了現有結構抗力變異性的主要影響因素，並利用實測數據進行了實例分析；四、針對現有結構自身的荷載、抗力統計特性，研究了現有結構承載力的校核表達式，對恆載、抗力分項系數提出修訂建議，建立了基於自身信息的現有結構可靠性實用評定方法。 -
Owing to many unique properties of their own such as light self - weight, large flexibility and low damping, suspension cables often suffer large displacements but small strains each under normal work conditions. cables are also sensitive to dynamic loading with low frequencies such as wind loading
懸索具有質量輕、柔性大、阻尼低等特點，在正常工作情況下多處于大位移、小應變的變形狀態，對低頻荷載如風荷載等十分敏感。 -
Practical calculation method of normal cross section bearing capacity of r. c. column with deformed section subjected to biaxial eccentric compression loading
異型截面鋼筋混凝土雙向偏心受壓構件正截面承載力的實用計算方法 -
The results show that in the later stage of the nucleation process, the maximum slip velocity is monotonically accelerating ; the slipping hot spot ( where the slip rate is maximum ) migrates spontaneously from a certain instant, and such migration is spatially continuous ; when the maximum velocity reaches a detectable order of magnitude ( at least one order of magnitude greater than the loading rate ), the remaining time is 20 hours or more, and the temporal variation of slip velocity beyond this point may be used as a precursory indicator ; the average slip velocity is related to the remaining time by a log - log linear relation, which means that a similar relation between rate of microseismicity and remaining time may also exist ; when normal stress variation is taken into account, time scale of such processes can be extended by about 2 times
結果表明，在成核的後期階段：最大位移速率單調加速增加；滑動熱點（最大滑動速率處）在後期階段開始自發性遷移，且在空間上連續；當最大滑動速率達到可以明顯探測的量級時（高於載入速率一個數量級以上） ，倒計時間為20小時或更長一些，這時的速率變化可作為臨震預測標志；平均滑動速率與倒計時間的關系在臨震階段呈對數線性趨勢，由此可推測微震活動增長率與倒計時間同樣存在對數線性關系；正應力的變化對上述時間尺度有延長作用，使之大致增加到原數值的2倍。 -
The present results under uniform normal loading are the same as the available exact solutions, but those under uniform shear loading have not been found in the literature
法向均布載荷作用下的結果與現有精確解完全一致，切向均布載荷作用下的結果則尚未見有其它報道。
分享友人