outlet chamber 中文意思是什麼
outlet chamber
解釋
出風室-
The distributor at up part of drying chamber can control size and humidity of material at outlet
乾燥室上部分分散器可以控制出口物料的粒度及溫度。 -
When the chemical ( usually diluted with oil - based carrier ) is heated, it is vaporized in a combustion chamber and then expelled via an outlet tube to form a dense fog cloud when it condenses on contact with cool ambient air
當化學液體（通常以油劑稀釋）加熱后，經排氣管排出，一旦接觸外界溫度較低的空氣便凝結成一團煙霧。即使地方給茂密的植物或其他 -
The key items influent on the characteristics of spraying have been also studied in the dissertation, we can get a good spraying result by adjusting the related parameters efficiently. ( 3 ) the theoretical model of the dynamical parameters such as temperature, moisture, pressure and contour for hot medium and particle inside the drying chamber were obtained by model, utilized the computational fluid dynamics technique to solve the problem between spraying droplets medium by arranging the double grid dispersing structure and rotary outlet structure and the developed structure improved the drying efficiency and product quality
（ 3 ）採用-模型實現了壓力噴霧乾燥塔的溫度場、濕度場、流場的理論建模，利用計算流體力學（ cfd ）技術來解決噴霧乾燥過程中熱介質與霧滴間的傳熱傳質以及動量傳遞和湍流擾動等問題，避免了乾燥過程中的設計不合理狀況；通過增加雙格柵均風裝置和旋轉出風裝置，改善了乾燥塔內的熱質傳遞，提高了乾燥塔的體積蒸發強度。 -
It is discovered that the combustion condition of the second stage pc is up to the outlet temperature of the first stage pc and the content of combustible gases in first stage flue also plays positive effect on the ignition of second stage pc. the effects of parameters of two coal - air mixture, wall temperature of first ignition chamber and annular filling air on imfit are studied experimentally in this thesis. in this thesis, the numerical simulations of ignition and combustion of pc in imfit are conducted
本文通過建立數學模型，對感應加熱煤粉多級無油點火進行數值模擬，研究了一級煤粉煤粉在點火室內的著火過程和二級點燃過程、煤粉粒徑分佈對煤粉多級無油點火的影響，研究了一級點火室壁面溫度、一級煤粉氣流和二級煤粉氣流的風粉參數在煤粉多級無油點火過程中的影響規律；根據二級點燃段的流場和溫度場分佈，研究了環形夾心風推遲二級煤粉著火的機理。 -
When piston pump is applied force upward and movces, the lower check valve is opened, the fluid of upper pump chamber flows out of outlet when the piston runs upward
當泵柱塞受力向上移動時，下止回閥打開，液體湧入下泵室中，泵進行進料的過程，上止回閥關閉，上泵室中的流體在柱塞上行時由出口端擠出。 -
When pump is applied force downward and moves, the lower check valve is closed, the fluid in the pump is extruded and charges upward out of upper check valve, then flows into upper pump chamber, because that the piston has volume, some fluid flow out of outlet due to the reduce of spatial fluid volume in upper pump chamber
當泵的柱塞受力向下移動時，下止回閥關閉，泵中的液體受擠壓而向上沖開上止回閥而流入上泵室中，由於柱塞本身佔有體積，部分的流體因上泵室內空間流體積的減少而自出口端流出。 -
The dehydration time is square of the droplets diameter so the small diameters of the droplets can cut down the drying time then reduce the height of the drying chamber. to the combined spin - flow pressure spray drying, the diameters of droplets are small and the dehydration rate is higher so keeping the qualities of the dried products we can increase the speed of the inlet wind and reduce the temperature of the outlet wind thus can improve the evaporation intensity of the drying chamber and the average energy utilization of the drying equipment
因霧滴的脫水時間與其直徑的平方成正比，減小液滴直徑有利於縮短乾燥脫水時間，可有效降低乾燥塔的高度；由於旋流式組合壓力噴嘴霧化滴徑的減小，脫水速度明顯加快，在不影響乾燥物料性質的前提下，適當提高進風溫度，同時有效地降低排氣溫度，有利於提高幹燥塔的蒸發強度，也有利於提高幹燥設備的平均能源利用率。 -
Then author discusses the writing and debugging of the program. the ventilation of a typical chamber with a stable fixed pollutant emission is studied by founding different boundary conditions ( here, they are the both up inlet and outlet on opposite side, the up - inlet and down - outlet on opposite side and the up - inlet and down - outlet on the same side. ). and accordingly dividing different grids. using the program, the velocity values and the pollution concentration values of the chamber are worked out
對所研究的具有單個固定污染源的典型房間的室內通風，通過對異側上送上排、上送下排以及同側上送下排等幾種方式下，建立相應的邊界條件並劃分網格，運用編制的程序對它們進行數值模擬，所得的計算結果再用excel軟體分別進行顯示與處理，得到相應條件下的流場、濃度場，而後再算出相應的通風效率。 -
At the same time, figures involving attribute data about flow field at inlet and outlet downstream or wave motion of water at the downflow head of lock chamber of siyang navigation lock were displayed through gis application system which we developed. according to data of baoying navigation lock acquired by mathematics model, figures about velocities which have the same value, velocities toward cross direction which have the same value and flow field at inlet and outlet upstream were formed. achievement data, space information and attribute information were in connection with figure so as to search for and analysis the information, which is satisfying
同時完成了江蘇泗陽船閘下游引航道非恆定流及其改善措施的計算分析研究和寶應船閘上游引航道口門區水流條件計算分析研究，運用gis技術和所設計的gis應用系統對泗陽船閘下游引航道內流場以及下閘首水位波動情況進行信息顯示，根據對寶應船閘的計算結果生成上游引航道口門區等流速圖、橫向流速等值線圖和流場圖，使計算分析成果數據、空間信息、屬性信息與圖形顯示有機結合，便於查詢分析，效果令人滿意。 -
The heat transfer enhancement is different under different oscillator. there is the optimum oscillation intensity under which the heat transfer coefficient will be increased by about 30 percent. the change of outlet structure size of a resonance chamber shows little effect on the strength of heat transfer : the pressure of the optional heat transfer coefficient always is between 0. 4mpa and 0. 6mpa, and the optional heat transfer coefficient is enhanced by 30 percent or so
不同的振蕩強度，強化換熱的效果也不同，存在一個最佳強度，此時的強化換熱效果最好，可以將表面換熱系數提高30 %左右；對于同一共振腔，配合以不同的出口結構尺寸，對于換熱效果的強化的影響變化不大：出現最佳強化效果時的壓力基本都在0 . 4 - 0 . 6 ，最佳的強化效果也都是將表面換熱系數提高30 %左右。 -
The nox concentration of the outlet of the combustion chamber increases with the temperature of preheated air
得出燃燒室出口no _ x的濃度隨預熱空氣溫度的增加而增加。 -
The design of vacuum arcing chamber and insulation support sheath pipe is compact, because the outlet line conduct pole is coated silicon rubber, it can be suitable for bad weather and pollution environment
真空滅弧室和絕緣支柱套管設計緊湊，出線導電桿外注硅橡膠，能適應惡劣的氣候條件和污穢環境。 -
That is, through analysis of the principle on flow control and " hydraulic transistor ", design and calculation of flow control characteristic as well as main parts in valve inner chamber, a piloted reducing valve will be installed between main valve and pilot valve. after a pressure - difference compensating reducing valve was added in the non - pressure compensating piloted reducing valve of the flow control valve in vlalvistor valve, the calculation on control characteristic emulation and load characteristic emulation has been carried out. the result of the calculation shows that after pressure compensating reducing valve was added, the linearity of the control characteristics has been greatly improved thus eliminating influence upon outlet flow by load pressure - change of the hydraulic system and improving performance characteristics of the hydraulic component
文章還在對瑞典valvistor閥的插裝比例閥研究的基礎上，提出了一種新的流量控制原理，即：通過對流量控制和「液壓晶體管」原理的分析、流量控制特性及閥內腔主要結構件的設計計算，在主閥和導閥之間增設先導減壓閥，並進一步對valvistor閥的流量控制閥之無壓力補償先導減壓閥、加入壓差補償減壓閥后的控制特性進行了模擬計算和負載特性模擬計算，結果表明：增設壓力補償先導增壓閥后，其控制特性曲線變得非常線性，從而消除了液壓系統負載壓力變化對主閥輸出流量的影響。
分享友人