shaping method 中文意思是什麼

shaping method 解釋
成形法
  • shaping : 成型
  • method : n 1 方法，方式；順序。2 （思想、言談上的）條理，規律，秩序。3 【生物學】分類法。4 〈M 〉【戲劇】...
  1. A detailed introduction was made to the properties of the wet coated sand suitable for multi - station shell mould shooting machine ; the development of a sort of high strength coated sand with low resin content : the shaping index and wetness adjusting process : analysis and prevention of peel back defect of shells made with overturning hopper process ; test method of peel back resistance of coated sand : pinhole defect analysis of high ni ductile iron shell mould castings and application of anti - pinhole coated sand

    詳細介紹適用於吹砂式多工位殼型機的濕態覆膜砂性能；高強度低樹脂量覆膜砂的研製；濕態殼型覆膜砂的成形性指數與調濕工藝；翻鬥法制殼時的脫殼問題分析和解決辦法；覆膜砂脫殼性檢測方法；高鎳球鐵件殼型鑄造表面針孔原因分析與抗針孔覆膜砂的應用。
  2. Series full - auto pipe expander with drawing device and program interface is used with extruding machine. it is also used solitarily, while expanding pipes, the machine adopts translation, the action is steady and corret, it does not damage pipe materical, the machine adoptes double - infrared heating oven type, each oven is equipped with heating cire, the shaping method adopts expanding - end shaping, the size of pipe mouth is correct. on its panel, there is a transfer swith of expanding solvent type pipe socket ( straigh port ) and expanding sealloop type pipe socket ( rport ). the choice of expanding pipe type is very convenient, the technologocal adaptability is strong, its main electric control elements are all imported. the syetem charecteristics are steady and reliable

    配有與主機配套的接料牽引裝置和相應的程序介面，既能與擠管主機聯線使用，又可以作單機使用；擴管時管材的移動均採用平移方式，動作平穩準確而且不易損傷管材；這種機型採用紅外線加熱方式且為雙加熱爐型，每個加熱爐都配有中心加熱爐芯；成型方式均採用擴管頭定型方式，管口成型尺寸準確；該機型在控制面板上設有擴溶劑型承介面（直口）和擴彈性密封圈型承介面（ r口）的轉換開關，擴管方式選擇十分方便，工藝適應性強；主要的電器控制元件均採用進口元件，系統性能穩定可靠。
  3. This paper discusses the moistureproof and heat insulating properties ， the design and calculation, and the shaping method and characteristics of expansible polystyrene it lays the theoretical foundation for reasonably using materials in building trade

    論述了聚苯乙烯材料的防潮保溫的性能、設計計算以及成型方法和特點，為建築業合理使用材料提供了理論依據。
  4. Abstract : in this paper, reporter establishes a probability mod el of shaping machine to be repaired. the theory on repair ability of machine too l is discussed in detail. it approcached to a way of deciding optimum repairing p eriod, and given its calculate method

    文摘:以一牛頭刨床為例，建立了其失效的概率模型，論述了機床可靠性維修的理論，探討了機床的最佳維修周期的界定問題及計算方法。
  5. Compared with normal weight selection method, the new method can reduce the iteration times of weight function selection, and ensure the synthetical performance of the resulting h ( subscript ) loop shaping controller

    與常規的權重函數選取方法相比，該方法能夠減少權重函數選取時迭代的次數，保證控制器的綜合性能。
  6. Based on the introduction and analysis of the approach of h ( subscript ) loop shaping, aiming at the problems that the weight functions are chosen by trial and error, and the synthetical performance index of the controller is hard to meet the frequency and time domain performance requirements, an improved weight function selection method is proposed based on engineering design and chaos optimization

    摘要在介紹和分析h （下標）迴路成形基本設計力法的基礎上，針對權重函數選取需要反復迭代、過程繁瑣、所得控制器難以同時滿足時域和頻域性能指標等問題，提出了一種基於工程設計、輔以混沌優化理論的權重函數選取方法。
  7. In the thesis, the design method of the diagonal flow fan impeller has detailedly researched different from the previous means borrowing and extending design methods for axial flow or centrifugal type, a complete design method has presented on the basis of quasi - three dimensional design idea. the course is mainly composed of such steps as meridional surface design, inverse problem computation in meridional surface, blade shaping on stream surface, and verifying through three dimensional computation, until the design requirement is met at last

    不同於以往的軸流式或離心式延長設計方法或經驗方法，本文按照準三元設計的思路給出了一套完整的設計方法，即子午面設計?子午面反問題計算?斜流流面上葉片造型?三維計算驗證優化，直至符合設計目標。
  8. In this paper, we brought forward an innovative idea : according to the characteristics of easy deformation of ultra - thin mirror, we employ a sphere mirror, which is easier to fabricate and test, to replace the aspherical mirror, then the sphere mirror is deformed into an aspherical one by active optics technology. on this purpose, we need to study the mechanism and method of shaping a spherical mirror into an aspherical one

    由於非球面鏡的加工和檢測都比較困難，因此本文提出了一個大膽的設想:利用超薄鏡易於變形的特點，以加工和檢測難度遠低於非球面的球面來代替非球面，運用鏡面的主動控制技術將球面反射鏡變形成所需精度的非球面反射鏡。
  9. First, we analysize the performance of coherent and noncoherent dlls, then we give an implementation scheme of dll and a design method of carrier tracking loop. the design methods and a implemention scheme of a fir shaping filter is proposed in the fifth part

    首先分析了相干和非相干延遲鎖定環的性能，接著給出了一種dll跟蹤環路的實現方案和一種載波跟蹤環路的設計方法。第五部分介紹了一種fir成型濾波器的設計和實現方法。
  10. Moderate refinement of grain is an effective method to enhance service and shaping properties

    適度的晶粒細化是提高材料服役性能和加工成形性能的有效手段。
  11. In accordance with the problems existing in the present research, taking milky way mcar as the object of study, some creative work has been as follow : 1. a systematic introduction was given about the shaping method, characteristics and developing history of mcar. the present experimental and theoretical researches situations and the preliminary conclusions were summarized

    本文以銀河拱型波紋鋼屋蓋為研究對象，基於國內外的研究及應用狀況，針對目前所存在的問題，主要進行了如下一系列有意義的研究： 1 、系統的介紹了金屬拱型波紋屋蓋的成型方法、特點、發展歷史，綜述了這種新型結構形式的理論、試驗研究現狀。
  12. Realization of the wide - band shaping filter in baseband is carefully analyzed, and then a low - cost realization method is brought forward. furthermore, through shaping filters, i / q route self - synchronization and compensation and revise of the nonlinearity and the imbalance of amplitude and phase of the modulation circuits are advanced

    分析了基帶寬帶數字成形濾波器的實現難點，提出了低代價的實現方法，並利用成形濾波器解決了調制端i / q自動同步，調制電路的各種非線性和幅相不平衡的補償校正等問題。
  13. A new method, which uses shaping circuit and programmable computer controller with appropriate software to measure frequency, is initially applied which overcomes the problems of low reliability and slow responding process of traditional frequency measurement unit, improves the reliability and dynamic quality of frequency measurement and expedites the responding speed effectively

    首次提出了一種由整形電路和可編程計算機控制器配以適當軟體完成頻率測量的方法，有效地解決了plc調速器測頻環節存在的可靠性差及響應速度慢的問題，提高了頻率測量的可靠性及動態品質。
  14. Model reduction method based on optimization shaping for aero - engine controller

    高超聲速機的固定階魯棒控制器的設計
  15. The working condition of nylon shaft liner is determined by many factors, for example : the different formula, shaping technique, the design of shaft liner, installation method, loading features, running speed, lubricant condition, the working environment of shaft liner temperature, humidity and the influence of impurity, abrasion when working etc. so, when designing shaft liner, it is necessary to take consideration of all conditions

    鑄型尼軸套的許用工作情況是由很多因素決定的，例如不同配方和成型工藝所制得的材料物理機械性能，軸套的設計裝配方法，負載特點，運轉速度，潤滑情況，軸套的工作環境溫度濕度雜質的影響，工作時的摩擦條件，對磨材料的性能等。因此，在設計軸套時，應綜合考慮各個方面的因素。
  16. The proposed control system includes the attitude controller acting on the rigid hub, designed by using pulse - width pulse - frequency ( pwpf ) modulation integrated with command shaping technique based on csvs method, and the piezoelectric material elements as sensors / actuators bonded on the surface of the beam appendages, designed by the optimal positive position feedback ( oppf ) control technique, in which the selection of ppf gains is determined via introducing a cost function to be minimized by feedback gains which are subject to the stability criterion at the

    設計的控制器僅利用輸出信息，從而避免設計撓性模態狀態觀測器以及引入狀態觀測器誤差;在此基礎上，採用分力合成方法設計命令成形控制器來抑制撓性附件的振動，設計的優化命令成形控制信號在理論上可以對系統的各階撓性模態完全抑制。但考慮到模型不確定性和外部擾動，在內迴路又設計了最優正位置反饋（ oppf ）補償器以增加撓性結構的阻尼，使撓性結構的振動能夠很快衰減。
  17. This learning method has three major functions : cultivating open individuality and an insight into future, activating inquiring interesting and creative consciousness and shaping down - to - earth spirit and operating ability

    這種學習活動主要有三大功能：培養開放個性與前瞻眼光，激活探究興趣與創新意識，塑造務實精神與動手能力。
  18. Cement stability gravel try on pieces of shaping method to limited influence on compression strength

    水泥穩定砂礫試件成型方法對無側限抗壓強度的影響
  19. Based on these, the tdof design procedures by using h loop shaping method and h2 / h loop shaping methods are presented in later chapter

    接著闡述了h ~迴路成形方法的原理，提出了兩種h ~ 2 / h ~迴路成形設計方法。
  20. The main contents of this paper are outlined as follows, ( 1 ) the physical significations and the correlativities of the often - used h performance targets are summarized, the selection strategies of the weighting functions are researched, and loop - shaping method as well as standard problems of robust h control are introduced. the frequency domain methods of robust h control are also introduced to solve the rate - based congestion control problem of the high - speed communication networks, and the h based controller are designed to deal with the time - delay problem of the single bottleneck node and multiple resources networks

    主要研究內容包括（ 1 ）總結了各種常見h性能指標的物理意義及相互關系，探索了權函數的選取策略，介紹了迴路成形方法及h控制標準問題；最後把h控制頻域設計方法應用於解決高速通信網路基於流速的擁塞控制問題，設計基於h控制理論的流控制器用於解決多源單瓶頸網路中時變不確定多時滯問題。
分享友人
分享到 Line

分享到臉書